The eMMC inline crypto standard will only specify 32 DUN bits (a.k.a. IV
bits), unlike UFS's 64. IV_INO_LBLK_64 is therefore not applicable, but
an encryption format which uses one key per policy and permits the
moving of encrypted file contents (as f2fs's garbage collector requires)
is still desirable.
To support such hardware, add a new encryption format IV_INO_LBLK_32
that makes the best use of the 32 bits: the IV is set to
'SipHash-2-4(inode_number) + file_logical_block_number mod 2^32', where
the SipHash key is derived from the fscrypt master key. We hash only
the inode number and not also the block number, because we need to
maintain contiguity of DUNs to merge bios.
Unlike with IV_INO_LBLK_64, with this format IV reuse is possible; this
is unavoidable given the size of the DUN. This means this format should
only be used where the requirements of the first paragraph apply.
However, the hash spreads out the IVs in the whole usable range, and the
use of a keyed hash makes it difficult for an attacker to determine
which files use which IVs.
Besides the above differences, this flag works like IV_INO_LBLK_64 in
that on ext4 it is only allowed if the stable_inodes feature has been
enabled to prevent inode numbers and the filesystem UUID from changing.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200515204141.251098-1-ebiggers@kernel.org
(Resolved conflicts with inline encryption support. Besides the
necessary "straightforward" merge resolutions, also made
fscrypt_get_dun_bytes() aware of IV_INO_LBLK_32 and made IV_INO_LBLK_32
usable with wrapped keys.)
Test: 'atest vts_kernel_encryption_test' on Cuttlefish with
the IV_INO_LBLK_32 test added (http://aosp/1315024).
Also tested enabling this in the fstab for Cuttlefish
(using http://aosp/1315886).
Also ran 'kvm-xfstests -c ext4,f2fs -g encrypt', including my
work-in-progress xfstest for IV_INO_LBLK_32.
Bug: 144046242
Change-Id: I57df71d502bde0475efc906a0812102063ff2f2a
Signed-off-by: Eric Biggers <ebiggers@google.com>
-----BEGIN PGP SIGNATURE-----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=dmPo
-----END PGP SIGNATURE-----
Merge 5.4.42 into android-5.4-stable
Changes in 5.4.42
net: dsa: Do not make user port errors fatal
shmem: fix possible deadlocks on shmlock_user_lock
net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.
KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
gpio: pca953x: Fix pca953x_gpio_set_config
SUNRPC: Add "@len" parameter to gss_unwrap()
SUNRPC: Fix GSS privacy computation of auth->au_ralign
net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'
net: moxa: Fix a potential double 'free_irq()'
ftrace/selftests: workaround cgroup RT scheduling issues
drop_monitor: work around gcc-10 stringop-overflow warning
virtio-blk: handle block_device_operations callbacks after hot unplug
sun6i: dsi: fix gcc-4.8
net_sched: fix tcm_parent in tc filter dump
scsi: sg: add sg_remove_request in sg_write
selftests/bpf: fix goto cleanup label not defined
mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040
dpaa2-eth: properly handle buffer size restrictions
net: fix a potential recursive NETDEV_FEAT_CHANGE
netlabel: cope with NULL catmap
net: phy: fix aneg restart in phy_ethtool_set_eee
net: stmmac: fix num_por initialization
pppoe: only process PADT targeted at local interfaces
Revert "ipv6: add mtu lock check in __ip6_rt_update_pmtu"
tcp: fix error recovery in tcp_zerocopy_receive()
tcp: fix SO_RCVLOWAT hangs with fat skbs
virtio_net: fix lockdep warning on 32 bit
dpaa2-eth: prevent array underflow in update_cls_rule()
hinic: fix a bug of ndo_stop
net: dsa: loop: Add module soft dependency
net: ipv4: really enforce backoff for redirects
netprio_cgroup: Fix unlimited memory leak of v2 cgroups
net: tcp: fix rx timestamp behavior for tcp_recvmsg
nfp: abm: fix error return code in nfp_abm_vnic_alloc()
r8169: re-establish support for RTL8401 chip version
umh: fix memory leak on execve failure
riscv: fix vdso build with lld
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
dmaengine: mmp_tdma: Do not ignore slave config validation errors
dmaengine: mmp_tdma: Reset channel error on release
selftests/ftrace: Check the first record for kprobe_args_type.tc
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
ALSA: hda/hdmi: fix race in monitor detection during probe
drm/amd/powerplay: avoid using pm_en before it is initialized revised
drm/amd/display: check if REFCLK_CNTL register is present
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/amdgpu: simplify padding calculations (v2)
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
ipc/util.c: sysvipc_find_ipc() incorrectly updates position index
ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse
gfs2: Another gfs2_walk_metadata fix
mmc: sdhci-pci-gli: Fix no irq handler from suspend
IB/hfi1: Fix another case where pq is left on waitlist
ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()
pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H
pinctrl: baytrail: Enable pin configuration setting for GPIO chip
pinctrl: qcom: fix wrong write in update_dual_edge
pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler
bpf: Fix error return code in map_lookup_and_delete_elem()
ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format
i40iw: Fix error handling in i40iw_manage_arp_cache()
drm/i915: Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled
bpf, sockmap: msg_pop_data can incorrecty set an sge length
bpf, sockmap: bpf_tcp_ingress needs to subtract bytes from sg.size
mmc: alcor: Fix a resource leak in the error path for ->probe()
mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10
mmc: core: Check request type before completing the request
mmc: core: Fix recursive locking issue in CQE recovery path
mmc: block: Fix request completion in the CQE timeout path
gfs2: More gfs2_find_jhead fixes
fork: prevent accidental access to clone3 features
drm/amdgpu: force fbdev into vram
NFS: Fix fscache super_cookie index_key from changing after umount
nfs: fscache: use timespec64 in inode auxdata
NFSv4: Fix fscache cookie aux_data to ensure change_attr is included
netfilter: conntrack: avoid gcc-10 zero-length-bounds warning
drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest
arm64: fix the flush_icache_range arguments in machine_kexec
nfs: fix NULL deference in nfs4_get_valid_delegation
SUNRPC: Signalled ASYNC tasks need to exit
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_rbtree: Add missing expired checks
RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()
IB/mlx4: Test return value of calls to ib_get_cached_pkey
IB/core: Fix potential NULL pointer dereference in pkey cache
RDMA/core: Fix double put of resource
RDMA/iw_cxgb4: Fix incorrect function parameters
hwmon: (da9052) Synchronize access with mfd
s390/ism: fix error return code in ism_probe()
mm, memcg: fix inconsistent oom event behavior
NFSv3: fix rpc receive buffer size for MOUNT call
pnp: Use list_for_each_entry() instead of open coding
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
Stop the ad-hoc games with -Wno-maybe-initialized
gcc-10: disable 'zero-length-bounds' warning for now
gcc-10: disable 'array-bounds' warning for now
gcc-10: disable 'stringop-overflow' warning for now
gcc-10: disable 'restrict' warning for now
gcc-10 warnings: fix low-hanging fruit
gcc-10: mark more functions __init to avoid section mismatch warnings
gcc-10: avoid shadowing standard library 'free()' in crypto
usb: usbfs: correct kernel->user page attribute mismatch
USB: usbfs: fix mmap dma mismatch
ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA
ALSA: rawmidi: Fix racy buffer resize under concurrent accesses
ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset
usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
usb: host: xhci-plat: keep runtime active when removing host
usb: cdns3: gadget: prev_req->trb is NULL for ep0
USB: gadget: fix illegal array access in binding with UDC
usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()
ARM: dts: dra7: Fix bus_dma_limit for PCIe
ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection
drm/amd/display: add basic atomic check for cursor plane
powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG
cifs: fix leaked reference on requeued write
x86: Fix early boot crash on gcc-10, third try
x86/unwind/orc: Fix error handling in __unwind_start()
exec: Move would_dump into flush_old_exec
clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
fanotify: fix merging marks masks with FAN_ONDIR
usb: gadget: net2272: Fix a memory leak in an error handling path in 'net2272_plat_probe()'
usb: gadget: audio: Fix a missing error return value in audio_bind()
usb: gadget: legacy: fix error return code in gncm_bind()
usb: gadget: legacy: fix error return code in cdc_bind()
Revert "ALSA: hda/realtek: Fix pop noise on ALC225"
clk: Unlink clock if failed to prepare or enable
arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property
arm64: dts: meson-g12-common: fix dwc2 clock names
arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boards
arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happy
arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn
ARM: dts: r8a73a4: Add missing CMT1 interrupts
arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodes
ARM: dts: r8a7740: Add missing extal2 to CPG node
SUNRPC: Revert 241b1f419f ("SUNRPC: Remove xdr_buf_trim()")
bpf: Fix sk_psock refcnt leak when receiving message
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
Makefile: disallow data races on gcc-10 as well
libbpf: Extract and generalize CPU mask parsing logic
selftest/bpf: fix backported test_select_reuseport selftest changes
bpf: Test_progs, fix test_get_stack_rawtp_err.c build
Linux 5.4.42
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I15318d0b2611dec3962b1db1cbca8ae5dea2ff60
The linux-5.4.y commit 8781011a30 ("bpf: Test_progs, add test to catch
retval refine error handling") fails to build when libbpf headers are
not installed, as it tries to include <bpf/bpf_helpers.h>:
progs/test_get_stack_rawtp_err.c:4:10:
fatal error: 'bpf/bpf_helpers.h' file not found
For 5.4-stable (only) the new test prog needs to include "bpf_helpers.h"
instead (like all the rest of progs/*.c do) because 5.4-stable does not
carry commit e01a75c15969 ("libbpf: Move bpf_{helpers, helper_defs,
endian, tracing}.h into libbpf").
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Fixes: 8781011a30 ("bpf: Test_progs, add test to catch retval refine error handling")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up RET_IF as CHECK macro to make selftests compile again.
Fixes: b911c5e868 ("selftests: bpf: Reset global state between reuseport test runs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6803ee25f0ead1e836808acb14396bb9a9849113 upstream.
This logic is re-used for parsing a set of online CPUs. Having it as an
isolated piece of code working with input string makes it conveninent to test
this logic as well. While refactoring, also improve the robustness of original
implementation.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212013548.1690564-1-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream.
gcc-10 will rename --param=allow-store-data-races=0
to -fno-allow-store-data-races.
The flag change happened at https://gcc.gnu.org/PR92046.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream.
Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.
Fixes: a9e38c3e01 ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <juew@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200511225616.19557-1-jmattson@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18f02ad19e2c2a1d9e1d55a4e1c0cbf51419151c upstream.
tcp_bpf_recvmsg() invokes sk_psock_get(), which returns a reference of
the specified sk_psock object to "psock" with increased refcnt.
When tcp_bpf_recvmsg() returns, local variable "psock" becomes invalid,
so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in several exception handling paths
of tcp_bpf_recvmsg(). When those error scenarios occur such as "flags"
includes MSG_ERRQUEUE, the function forgets to decrease the refcnt
increased by sk_psock_get(), causing a refcnt leak.
Fix this issue by calling sk_psock_put() or pulling up the error queue
read handling when those error scenarios occur.
Fixes: e7a5f1f1cd000 ("bpf/sockmap: Read psock ingress_msg before sk_receive_queue")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1587872115-42805-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a8e7b7d08466b5fc52f8e96070acc116d82a8bb upstream.
I've noticed that when krb5i or krb5p security is in use,
retransmitted requests are missing the server's duplicate reply
cache. The computed checksum on the retransmitted request does not
match the cached checksum, resulting in the server performing the
retransmitted request again instead of returning the cached reply.
The assumptions made when removing xdr_buf_trim() were not correct.
In the send paths, the upper layer has already set the segment
lengths correctly, and shorting the buffer's content is simply a
matter of reducing buf->len.
xdr_buf_trim() is the right answer in the receive/unwrap path on
both the client and the server. The buffer segment lengths have to
be shortened one-by-one.
On the server side in particular, head.iov_len needs to be updated
correctly to enable nfsd_cache_csum() to work correctly. The simple
buf->len computation doesn't do that, and that results in
checksumming stale data in the buffer.
The problem isn't noticed until there's significant instability of
the RPC transport. At that point, the reliability of retransmit
detection on the server becomes crucial.
Fixes: 241b1f419f ("SUNRPC: Remove xdr_buf_trim()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream.
The Clock Pulse Generator (CPG) device node lacks the extal2 clock.
This may lead to a failure registering the "r" clock, or to a wrong
parent for the "usb24s" clock, depending on MD_CK2 pin configuration and
boot loader CPG_USBCKCR register configuration.
This went unnoticed, as this does not affect the single upstream board
configuration, which relies on the first clock input only.
Fixes: d9ffd583bf ("ARM: shmobile: r8a7740: add SoC clocks to DTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream.
The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for
each channel, but currently only 1 is described.
Fix this by adding the missing interrupts.
Fixes: f7b6523001 ("ARM: shmobile: r8a73a4: Add CMT1 node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15ddc3e17aec0de4c69d595b873e184432b9791d upstream.
Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the
timeout error.
Fixes: 6c3debcbae ("arm64: dts: freescale: Add i.MX8MN dtsi support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 190c7f6fd43a776d4a6da1dac44408104649e9b7 upstream.
The device tree compiler complains that the dwc3 nodes have regs
properties but no matching unit addresses.
Add the unit addresses to the device node name. While at it, also rename
the nodes from "dwc3" to "usb", as guidelines require device nodes have
generic names.
Fixes: 7144224f2c ("arm64: dts: rockchip: support dwc3 USB for rk3399")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83b994129fb4c18a8460fd395864a28740e5e7fb upstream.
In some board device tree files, "rk805" was used for the RK805 PMIC's
node name. However the policy for device trees is that generic names
should be used.
Replace the "rk805" node name with the generic "pmic" name.
Fixes: 1e28037ec8 ("arm64: dts: rockchip: add rk805 node for rk3328-evb")
Fixes: 955bebde05 ("arm64: dts: rockchip: add rk3328-rock64 board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ac0869fb39b1c1ba84d4d75c550f82e0bf44c96 upstream.
In the process of moving the VIM3 audio nodes to a G12B specific dtsi
for enabling the SM1 based VIM3L, the frddr_a status = "okay" property
got dropped.
This re-enables the frddr_a node to fix audio support.
Fixes: 4f26cc1c96 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20191018140216.4257-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 018d4671b9bbd4a5c55cf6eab3e1dbc70a50b66e upstream.
On failing to prepare or enable a clock, remove the core structure
from the list it has been inserted as it is about to be freed.
This otherwise leads to random crashes when subsequent clocks get
registered, during which parsing of the clock tree becomes adventurous.
Observed with QEMU's RPi-3 emulation.
Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream.
This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757.
Enable power save node breaks some systems with ACL225. Revert the patch
and use a platform specific quirk for the original issue isntead.
Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225")
BugLink: https://bugs.launchpad.net/bugs/1875916
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream.
If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.
Fixes: ab6796ae98 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream.
If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.
Fixes: 1156e91dd7 ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream.
If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0.
Fixes: 56023ce0fd ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream.
'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error
handling path, as already done in the remove function (i.e.
'net2272_plat_remove()')
Fixes: 90fccb529d ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55bf882c7f13dda8bbe624040c6d5b4fbb812d16 upstream.
Change the logic of FAN_ONDIR in two ways that are similar to the logic
of FAN_EVENT_ON_CHILD, that was fixed in commit 54a307ba8d ("fanotify:
fix logic of events on child"):
1. The flag is meaningless in ignore mask
2. The flag refers only to events in the mask of the mark where it is set
This is what the fanotify_mark.2 man page says about FAN_ONDIR:
"Without this flag, only events for files are created." It doesn't
say anything about setting this flag in ignore mask to stop getting
events on directories nor can I think of any setup where this capability
would be useful.
Currently, when marks masks are merged, the FAN_ONDIR flag set in one
mark affects the events that are set in another mark's mask and this
behavior causes unexpected results. For example, a user adds a mark on a
directory with mask FAN_ATTRIB | FAN_ONDIR and a mount mark with mask
FAN_OPEN (without FAN_ONDIR). An opendir() of that directory (which is
inside that mount) generates a FAN_OPEN event even though neither of the
marks requested to get open events on directories.
Link: https://lore.kernel.org/r/20200319151022.31456-10-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Rachel Sibley <rasibley@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00e21763f2c8cab21b7befa52996d1b18bde5c42 upstream.
The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
causes us to break out of the loop before we call
dwc3_gadget_ep_reclaim_completed_trb(), which is what likely
should be clearing the HWO flag.
This can cause odd behavior where we never reclaim all the trbs
in the sg list, so we never call giveback on a usb req, and that
will causes transfer stalls.
This effectively resovles the adb stalls seen on HiKey960
after userland changes started only using AIO in adbd.
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Josh Gao <jmgao@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable@vger.kernel.org #4.20+
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cec9d101d70a3509da9bd2e601e0b242154ce616 upstream.
The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.
Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.
Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.
Use the correct gate offset for aclk_gpu and aclk_gpu_noc.
Fixes: 307a2e9ac5 ("clk: rockchip: add clock controller for rk3228")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[double-checked against SoC manual and added fixes tag]
Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream.
I goofed when I added mm->user_ns support to would_dump. I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned. Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.
The net result is that the code stopped making unreadable interpreters
undumpable. Which allows them to be ptraced and written to disk
without special permissions. Oops.
The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.
To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.
I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.
Cc: stable@vger.kernel.org
Fixes: f84df2a6f2 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71c95825289f585014fe9741b051d32a7a916680 upstream.
The unwind_state 'error' field is used to inform the reliable unwinding
code that the stack trace can't be trusted. Set this field for all
errors in __unwind_start().
Also, move the zeroing out of the unwind_state struct to before the ORC
table initialization check, to prevent the caller from reading
uninitialized data if the ORC table is corrupted.
Fixes: af085d9084 ("stacktrace/x86: add function for detecting reliable stack traces")
Fixes: d3a0910401 ("x86/unwinder/orc: Dont bail on stack overflow")
Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream.
... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.
The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:
Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
Call Trace:
dump_stack
panic
? start_secondary
__stack_chk_fail
start_secondary
secondary_startup_64
-—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary
This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.
To fix that, the initial attempt was to mark the one function which
generates the stack canary with:
__attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)
however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.
The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.
The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").
This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.
That should hold for a long time, but hey we said that about the other
two solutions too so...
Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a48137996063d22ffba77e077425f49873856ca5 upstream.
Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.
cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.
Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 626bf90fe03fa080d8df06bb0397c95c53ae8e27 upstream.
This patch adds a basic cursor check when an atomic test-only commit is
performed. The position and size of the cursor plane is checked.
This should fix user-space relying on atomic checks to assign buffers to
planes.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Roman Gilg <subdiff@gmail.com>
References: https://github.com/emersion/libliftoff/issues/46
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbe63a8358310244e6007398bd2c7c70c7fd51cd upstream.
The Y Soft yapp4 platform supports up to two Ethernet ports.
The Ursa board though has only one Ethernet port populated and that is
the port@2. Since the introduction of this platform into mainline a wrong
port was deleted and the Ethernet could never work. Fix this by deleting
the correct port node.
Fixes: 87489ec3a7 ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream.
The I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c
imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc
imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22
Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.
Cc: <stable@vger.kernel.org>
Fixes: 61664d0b43 ("ARM: dts: imx27 phyCARD-S pinctrl")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90d4d3f4ea45370d482fa609dbae4d2281b4074f upstream.
Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit
for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller
gets incorrect value of bus_dma_limit.
Fix it by adding empty dma-ranges property to axi@0 and axi@1
(parent device tree node of PCIe controller).
Cc: stable@kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82152d424b6cb6fc1ede7d03d69c04e786688740 upstream.
This was sort of annoying me:
random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47
This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().
Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 6b7fc6a3e6af4ff5773949d0fed70d8e7f68d5ce)
[Rodrigo: port back to DRM_INFO_ONCE]
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c6f8cb92c9178fc0c66b580ea3df1fa3ac1155a upstream.
On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.
<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3
<2> sp : ca337c80 ip : 00000000 fp : ffffffff
<2> r10: 00000000 r9 : 50037000 r8 : 00004000
<2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000
<2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000
<2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
<2> Control: 10c0383d Table: b412c06a DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)
The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.
Fix this by check for the sg before any attributes of the sg are
accessed.
[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15753588bcd4bbffae1cca33c8ced5722477fe1f upstream.
FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.
Reference: https://www.spinics.net/lists/linux-usb/msg194331.html
This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.
The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.
BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208
CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x131/0x1b0 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
flush_write_buffer fs/configfs/file.c:251 [inline]
configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
__vfs_write+0x85/0x110 fs/read_write.c:494
vfs_write+0x1cd/0x510 fs/read_write.c:558
ksys_write+0x18a/0x220 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:620
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Kyungtae Kim <kt0755@gmail.com>
Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 073919e09ca445d4486968e3f851372ff44cf2b5 upstream.
Kingston HyperX headset with 0951:16ad also needs the same quirk for
delaying the frequency controls.
Signed-off-by: Jesus Ramos <jesus-ramos@live.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream.
The rawmidi core allows user to resize the runtime buffer via ioctl,
and this may lead to UAF when performed during concurrent reads or
writes: the read/write functions unlock the runtime lock temporarily
during copying form/to user-space, and that's the race window.
This patch fixes the hole by introducing a reference counter for the
runtime buffer read/write access and returns -EBUSY error when the
resize is performed concurrently against read/write.
Note that the ref count field is a simple integer instead of
refcount_t here, since the all contexts accessing the buffer is
basically protected with a spinlock, hence we need no expensive atomic
ops. Also, note that this busy check is needed only against read /
write functions, and not in receive/transmit callbacks; the race can
happen only at the spinlock hole mentioned in the above, while the
whole function is protected for receive / transmit callbacks.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com
Link: https://lore.kernel.org/r/s5heerw3r5z.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b94e59d30afecf18254ad413e953e7587645a20 upstream.
ASUS ZenBook UX431DA requires an additional COEF setup when booted
from the recent Windows 10, otherwise it produces the noisy output.
The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly
due to the pop noise reduction.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream.
Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0e710a7def471b8eb779ff551fc27701da49599 upstream.
In commit 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers. Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.
Thanks to Christoph for the quick idea of how to fix this.
Fixes: 2bef9aed6f0e ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bef9aed6f0e22391c8d4570749b1acc9bc3981e upstream.
On some architectures (e.g. arm64) requests for
IO coherent memory may use non-cachable attributes if
the relevant device isn't cache coherent. If these
pages are then remapped into userspace as cacheable,
they may not be coherent with the non-cacheable mappings.
In particular this happens with libusb, when it attempts
to create zero-copy buffers for use by rtl-sdr
(https://github.com/osmocom/rtl-sdr/). On low end arm
devices with non-coherent USB ports, the application will
be unexpectedly killed, while continuing to work fine on
arm machines with coherent USB controllers.
This bug has been discovered/reported a few times over
the last few years. In the case of rtl-sdr a compile time
option to enable/disable zero copy was implemented to
work around it.
Rather than relaying on application specific workarounds,
dma_mmap_coherent() can be used instead of remap_pfn_range().
The page cache/etc attributes will then be correctly set in
userspace to match the kernel mapping.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200504201348.1183246-1-jeremy.linton@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a263ae60b04de959d9ce9caea4889385eefcc7b upstream.
gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.
This results in warnings like:
crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]
because the crypto layer had its local freeing functions called
'free()'.
Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.
But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.
[ Side note: gcc knowing about 'free()' is in itself not the
mis-feature: the semantics of 'free()' are special enough that a
compiler can validly do special things when seeing it.
So the mis-feature here is that gcc thinks that 'free()' is some
restricted name, and you can't shadow it as a local static function.
Making the special 'free()' semantics be a function attribute rather
than tied to the name would be the much better model ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e99332e7b4cda6e60f5b5916cf9943a79dbef902 upstream.
It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before. Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.
The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:
Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()
So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
