Do not process or drop rxdma error decrpt frames. In case of
decrypt error the decryption is not proper and Rx OLE gets
corrupted bytes. So accessing these can lead to invalid buffers.
Change-Id: Idb3f942facf08fc26bde0fd9826db28955ca01d5
CRs-Fixed: 2613068
Currently there are unnecessary/duplicate logging. Identify and
reduce those logs that are not necessary.
Change-Id: If47a4fc0762a7a11666771e76a56d4fa1013647b
CRs-Fixed: 2615419
The candidate_min_roam_score_delta in struct
wmi_roam_cnd_scoring_param at the interface definition and this causes
compilation issues with older host.
Rename candidate_min_roam_score to fix compilation error.
Change-Id: Ie214b386ef4c14be2cdcaec9be0d8b6c7f1e7f33
CRs-Fixed: 2617981
This patch adds the function to extract and parse the wmi events
WMI_VDEV_AUDIO_SYNC_START_STOP_EVENTID and
WMI_VDEV_AUDIO_SYNC_Q_MASTER_SLAVE_OFFSET_EVENTID. These events are
required for ftm time sync feature.
Change-Id: Ib17da82b7a8abfcff5d18125a0ba0e5249d6bf54
CRs-Fixed: 2615452
Add an attribute QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY for
primary channel center frequency in the definition for Representative
Tx Power List (RTPL) list entry instance. This is required for 6 GHz
support, since the 6 GHz channel numbers overlap with existing 2.4 GHz
and 5 GHz channel numbers thus requiring frequency values to uniquely
identify channels.
Mark QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY as deprecated if both the
driver and user space application support 6 GHz. For backward
compatibility, QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if
either the driver or user space application or both do not support the
6 GHz band.
Change-Id: I71c60aa9512bd183eaf73e1bffa57cab0d5b40c5
CRs-Fixed: 2612147
A service bit is added to indicate Firmware supports sending NSS ratio
information to Host and Host receives the NSS ratio information from
Firmware as part of service ready ext event. Save this service bit in
soc's extcap feature bit. Extract the NSS ratio info from service ready
ext event and save the results in wlan_psoc_host_mac_phy_caps structure
to calculate NSS value.
Change-Id: I8fbee48d872b0724bbb629ad38b3c959736a3c39
CRs-Fixed: 2612959
This is a public API, so move it outside to hif.h file so it can be
used elsewhere as well.
Change-Id: Ic870cf804df69f6d7bb5a792da662759d687e0ed
CRs-Fixed: 2616491
Add support to send DSCP-to-UP map table values to
FW over WMI cmd to update its corresponding map table.
Change-Id: I92c1464881282ead00714d0b115cffd34dc9ba1f
CRs-Fixed: 2617045
8074 and QCN9000 coexist, so make hal_rx_msdu_packet_metadata_get()
as chip specific
Change-Id: I5b0b5e7f8915d12d4b267d5f07b03b47bb49a83f
CRs-Fixed: 2595314
During CU and low rssi based roam triggers, consider AP as roam candidate
only if its roam score is better than connected AP score by at least
candidate min roam score delta.
Hence, driver adds support to set candidate min roam score delta in
firmware.
Change-Id: I98d2c4ed5599e5d6d52941c46a236e0e5ccd8ba8
CRs-Fixed: 2614118
Currently if any layer tries to delete a peer which
has already been deleted, there is no check to stop
the delete operation. Deleting an already deleted peer
is incorrect.
Check if the peer is valid before we try to delete
the peer.
Change-Id: Icc280554a652e0ee3f1ea38c98fb130ea3c1ae80
CRs-Fixed: 2613595
Use qdf_scnprintf instead of snprintf to log channels to store
the freq list and print.
Change-Id: I4e2f4a93f3de9b9937af3699bde00bb2d1066ca5
CRs-Fixed: 2615319
As part of componentization of packet capture feature
removed INI of packet capture.
Change-Id: If9f599cbaf5bc3e339dc1f21ee6be36f5eb093f2
CRs-Fixed: 2614621
Move HAL_RX_MSDU_END_DA_IDX_GET macros to chip specific header file.
Fixing compilation failure for 6490 and 6750.
hal_rx_msdu_packet_metadata_get_generic need not be chip specific,
macros defining the function are already chip specific.
Change-Id: I940a289662bdeddfbf99fae2a80d7796334832e7
CRs-Fixed: 2595314
Rather than extracting msdu end pkt tlv information per field basis
during fast data path, extract msdu end pkt tlv information at once
and store in local structure.
Change-Id: I0877ba4f824d480cc0851c72090f010852d0d203
Drop the packet if msdu_done bit is not set while processing
rxdma err frames. This is not expected while reaping WBM RX
release ring.
Change-Id: I8776d15ea88319d7d955fdae90958648484dbda0
CRs-Fixed: 2603791
This change introduces the vendor event
QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT.
Host drivers can request user space application to set SAR
power limits with this interface.
Change-ID: I15cf651c722bf828ba9012d81d99922c39a9e1fc
CRs-Fixed: 2615364
Maintain packet counters for each peer based on protocol. Following 3
protocols are supported
* ICMP (IPv4)
* ARP (IPv4)
* EAP
Change-Id: I56dd9bbedd7b6698b7d155a524b242e8cabd76c3
CRs-Fixed: 2604877
Export __qdf_nbuf_data_is_icmp_pkt to outside QDF. This is needed for
implementing the per-peer protocol counters
Change-Id: I40db2b95347e95f2a5a7dbf6650fa873f564f1c3
CRs-Fixed: 2604877
In many functions, in the regulatory component
(e.g reg_modify_chan_list_for_freq_range), the channel enum iterations
assumes the channel enums and channel maps have the same order so that
there is a one-to-one mapping.
The change I5fe2c7a5db44f1cf8d6cb6317396c4527482137c removed
(compile-conditionally) a few channels. The removal violated the one-to-one
mapping principle. This led to 2Ghz channels being added to 5Ghz only
radio, which in turn caused many auto-channel selection issues and test
failures.
Instead of removing the channels, add (compile-conditionally) invalid
channels to maintain the one-to-one mapping.
Change-Id: I023de9732e02d52e544199b77680e9f7706d5210
CRs-Fixed: 2612990
A framework is added where the filters for every
mode are stored on a radio instance. Whenever a mode comes
up, it stores the filters in the radio and calls a
common API which iterates through all the enabled
mode filters and loops through them to create a
superset of filters which is sent to HTT.
This framework can be extended for new feature addition
which set filters for the monitor status and monitor
destination rings.
Change-Id: I9b739af2086bbe261b65c57af0a5bd867294f30f
CRs-Fixed: 2585872
pdev_id and mac_id were incorrectly passed
as arguments to dp_get_lmac_id_for_pdev_id
Fix passing the arguments in right order to
the API to access appropriate lmac_id
Change-Id: I42773a6ccae2f87f128d3c462e6a332fe658f45e
CRs-Fixed: 2611926
QDF_TRACE_LEVEL_NONE(= 0) is a valid value for qdf_dbg_mask,
which is currently being treated as error. Correct the
condition with this change
Change-Id: Id8ddebc4774ccf721ce7ff14b035f287b3a4b5ee
CRs-Fixed: 2587010
Add a function to encapsulate Spectral time stamp WAR logic which corrects
the Spectral time stamp reported by target.
Change-Id: I490c9f2109f36831cd8de47b8165749e93d9b5cb
CRs-Fixed: 2600170
1) Enable DDMA support, FFT bin length adjustment SWARs
2) Skip 16 bytes of padding added after Spectral summary report.
3) FFT report header length is 24 instead of 16 in Pine.
4) Max FFT size is changed to 10.
CRs-Fixed: 2608215
Change-Id: If32a8995f814140f5b61041031fb842d01d24c94
Beacon-interval is sent as part of vdev
start_params. Hence, the same need not be
sent as part of vdev up.
Change-Id: Ia1816a32d23c4925c0572c6c76996a36415fa275
CRs-Fixed: 2597539
Firmware advertises service capability bit
WMI_SERVICE_PEER_DELETE_NO_PEER_FLUSH_TIDS_CMD
when peer delete command takes care of flush
all tids functionality.
If this service bit is set advertised by FW
then host does not need to send the flush tid
command before sending the peer delete command.
Change-Id: Ic6632772eeebc7f1494f1dd5e9d533b2bc22e533
CRs-Fixed: 2609962
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
to implement thermal mitigation. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL.
Userspace requests the driver to enable/disable thermal mitigation
based on the thermal state of the device and wlan host performs the
required appropriate action. wlan host driver maps the thermal level
provided from userspace via vendor command to corresponding duty
cycle off percent value and duty cycle value,send
WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
Change-Id: Idc9c87dcb4275122980713471544baa23e705a53
CRs-Fixed: 2610403
In the change I0165f3bd4638280b45ad54391319806fba62e2fe, driver tries to
fetch the PDEV in init_deinit_handler before it is created in MCC. This
can cause driver init to fail.
Move the fetching of the PDEV to after the PDEV is created.
Change-Id: I028ac14da333084ce68f03f3d3771cdb6298933b
CRs-Fixed: 2611379
