Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
Get reo destination indication from REO2SW ring descriptor,
store it to qdf_nbuf_cb of skb.
Change-Id: I5a4c504b2550229a77a435b1f5ddb78c4abe51aa
CRs-Fixed: 2809080
QDF per packet proto logging is leading to excessive console
logging and hence change QDF per packet proto logging to
debug log level and avoid spamming precious kernel dmesg
log buffer.
Change-Id: Iae562a8541c81e7708caa822a0ce293e7d6e47f3
CRs-Fixed: 2808600
For REO error 7 OOR frame, if they are retry frame under BA
session, then they are likely SN duplicated frame. if deliver
EAPOL to stack in this case, sometimes it will fail to connect
AP as duplicated TX EAP response is seen.
Drop duplicated EAP frames in this case.
Change-Id: Iec0ba37548f2a83fe749f83ec904ec9bfdb306af
CRs-Fixed: 2796226
In FT roam when STA connects to AP1 then PMK1 gets cached. And
then STA disconnects from AP1 and connects to AP2 then PMK2
gets cached. Now if STA roams to AP1 then FW uses PMK2 from mlme
session to create the PMKID. But the corresponding RSO command
from driver sends the PMK1 to FW and the same gets updated in
mlme session of FW. This results in failure of next roams, as the
invalid PMKID gets created using PMK1.
This fix helps in deleting the old/stale PMK cache entries for
the same mobility domain as of the newly added entry.
Also the FT-SuiteB AKM is enabled in crypto using this change.
Change-Id: Id147ec40b8e0deacc4c427d396ec973cec483904
CRs-Fixed: 2796105
Assertion when detecting rx desc nbuf sanity check failure to get more
info in the RX refill buffer ring for default version.
Change-Id: I8d0255e2f13e2b993f5651b788f895ea06187bf9
CRs-Fixed: 2800602
wlan Tx completions doorbell is rung after IPA pipes are disabled
To fix this, Check if tx completions are pending before disable IPA
pipes.
Change-Id: I1903e593cd6a546a277979073f0a9ba62b681644
CRs-Fixed: 2796989
The connection process fails for several reasons and the status codes
defined in IEEE802.11 specification doesn't cover the locally generated
reason codes. Add an attribute to QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor sub command which can be used by driver/firmware to report various
additional reason codes for connection failures.
Change-Id: Ibab4696fba34f7a18fb8b5f8601e90c5dfcba89e
CRs-Fixed: 2799153
While performing MIC header check for MPDU fragmented packets
host is expecting last fragment will hold full 8bytes of MIC header,
but this is not true in case of MPDU level fragmentation since
MIC header is part of payload it can split across last two fragments.
Fix this logic by extracting MIC header from last two fragments in case
last fragment doesn't have full 8 bytes of MIC header.
Change-Id: I41aaa35d9a18ac0222ab55be6822f9c9d7f15982
CRs-Fixed: 2790661
Currently host does not convert all internal auth types
to qca auth types which results in invalid auth type
indication for big data logging even for some of the
valid auth types.
For example in current scenario connection hapens in SAE
auth type but driver indicates invalid AKM type.
To address above issue add missing auth type and send
proper auth type to user space as part of the big data
logging.
Change-Id: I2612a081385c2bc888afb032cf6fd2a44d886e40
CRs-Fixed: 2803348
In dp_mon_status_srng_drop_for_mac, the rx_desc pool
used for status ring is dest ring desc pool which is
not the appropriate one.
Fix is to use the appropriate desc pool for mon status
ring.
Change-Id: I6f178354789212b375a7a541366bef590a925568
CRs-Fixed: 2800658
TSO packet segments are enqueued to the HW individually.
The skb users count is incremented for each additional
segment, so that it is freed only when the TX completion
for the last segment is received.
Currently the skb users is incremented for the additional
TSO segments after the previous segment has been enqueued
to the HW. Due to this, there is a chance for the tx
completion for the first TSO segment to be received even
before the skb users is incremented to account for the
remaining TSO segments, thereby leading to use-after-free
scenarios.
Fix this by incrementing the skb users for additional
TSO segment before enqueueing the previous TSO segment
to the HW.
Change-Id: Idebc28719ba6f0223d5454e15c3cde349803816e
CRs-Fixed: 2801777
Add the reo destination indication value in
the FISA flow table. The reo destination
indication will be saved for every flow.
Change-Id: I58782cc7be7dd686dc9e0f5837e6bbe406cc1514
CRs-Fixed: 2803079
In monitor mode, as part of VDEV delete, monitor mode
poll timer is stopped; it is good to reap the monitor rings
once after timer stop to avoid crashes that arise due to
RXDMA2SW ring backpressure.
Change-Id: Ib15b3398087073ad053616c6aa68e295eaebdd17
CRs-Fixed: 2796608
Add apis to map generic registers to shadow region. Existing
logic includes mapping only srng based regs to the shadow
region.
Add support to map REO control regs and WBM2SW2 rel
ring HP reg address to the shadow region in case the direct
reg writes in IPA enable/disable autonomy fail due to UMAC
block being in a power collapsed state.
Shadow reg mapping for these regs is provided to FW during
init. Add stat shadow_reg_write_fail to track shadow reg
write failure and shadow_reg_write_succ to track successful
shadow writes.
Change-Id: I04790765a3de80047689657e2cad0b73123440b9
CRs-Fixed: 2790321
Add log limit to error "DMA not done" when reaping Monitor status ring
to avoid flooding other useful driver log.
Change-Id: I251ef8082d49bfdbcc6a234224cbefdba608b5f5
CRs-Fixed: 2798732
Rate limit log in reg_get_chan_enum_for_freq() API
to prevent excessive logging.
Change-Id: I52248877b5741f1f6a459b3f5240cabafbf1af05
CRs-Fixed: 2798752
In monitor mode, if channel is initially configured from 5G
band and then moved to channel from 2G band, packets are still
received on MAC-0 RXDMA2SW ring since IMPS is disabled for both
MACs. Since driver reaps only MAC-1 RXDMA2SW ring, ring full
condition is hit for the MAC-0 ring causing ring backpressure.
Fix is to drop packets received on the non-monitoring MAC
ring.
Change-Id: I49cb276827f4a06791183ee3fe8c88ba84df085d
CRs-Fixed: 2791341
log level for some frequent prints is set to info those
logs would be present in dmesg as well as driver logs
and System performance may get affected due to excessive
logging.
Avoid redundant logs which may affect system performance
and change default log level to debug.
Change-Id: Ic8669c2d7158200e5881bc1ffd15079c8d24af68
CRs-Fixed: 2794518
Handle case in mon dest ring buffer processing,
where one MPDU can have more than QDF_NBUF_MAX_FRAGS MSDU.
Change-Id: If09099814b7f701efbaa20b1406958ad97d64829
CRs-Fixed: 2788919
For QMI events, recevid QMI event length is used to allocate wmi buffer
using wmi_buf_alloc. The received QMI event length includes WMI head
room and wmi_buf_alloc also try to reserve WMI head room again.
Because of this, WMI buffer allocation is exceeding max WMI msg length.
To resolve this, use length of the received actual WMI msg to allocate
WMI event buffer using wmi_buf_alloc.
Change-Id: Icd259988c4b1091580a35aaf2c3fabc606e0f2a9
CRs-Fixed: 2786326
Add API to do IPA Tx buf SMMU-S1 unmapping and register it
with cdp ops for Hastings, also assert if map/unmap failed.
Change-Id: I4071b5fccd84c3c97b9dccc40c6f798d70993189
CRs-Fixed: 2792170
Many firmware do not send wmi_ext_service bitmap in wmi_ready event
so the ext_service_bitmap will be empty in such cases. So the condition
in the is_service_enabled_tlv to check for wmi_ext_service bitmap
and return false is wrong as wmi_ext_service bitmap support is not
necessity. This condition leads to incorrect behavior in cases when
firmware do not support wmi_ext_service bitmap as is_service_enabled_tlv
returns false for every service.
Fix the above failure by addition of condition check for wmi_ext_service
bitmap only when wmi_ext2_service bitmap is supported by firmware.
Change-Id: I94d0b65e640d44f41d14de889955a6d6330e88b2
CRs-Fixed: 2786491
A htt message arrived after ipa context is freed as part of
deinitialization which was dereferenced by event handler
assigned to pdev->ipa_uc_op_cb, resulting in crash.
To fix this, during deinit pdev->ipa_uc_op_cb is deregistered
and assigned NULL before freeing up ipa context.
Change-Id: I8125cb104a538e88cda93960f7443129fabd850a
CRs-Fixed: 2793295
As part of removing gOclCfg ini, remove code used for it that is
no longer needed.
Change-Id: I00c32988cb3b852381be9810377aeefdd22454db
CRs-Fixed: 2791469
HTC runtime count is incremented after posting the HTT
ver req message to CE4. There could be possibility of
processing the ver response message from FW even before
htc_runtime_cnt is incremented. This can casue RTPM put
to not happen causing imbalance in get/put count.
Fix is to increment htc_runtime_cnt before enqueuing
the HTT message to CE.
Change-Id: Ib9b69910cd14193c41ecfee804b390f8a6cdef49
CRs-Fixed: 2794451
Add WMI command buffer address information(DMA/Physical addr) to
the WMI TX completion logging. This will help in debugging issues
when HW DMAs copies data from a different location than the one
configured.
Change-Id: I60586b865a97e7ff88e48606806ec151321ff0aa
CRs-Fixed: 2789492
Send unified ll_stats and get_stats request over qmi based on INI
configuration.
Change-Id: Icc43352c1ba19696148619100ee27fda4d5ffb41
CRs-Fixed: 2791043
Host gets spectral scan data after stopped spectral scan, then it
can't find out current vdev since vdev id is reset when stopping
spectral scan.
Change-Id: I082b784e998a7600c7f8ef14bf67b790942f3a5f
CRs-Fixed: 2779397
Add hal_rx_msdu_get_reo_destination_indication API for QCA6750
target. Add NULL check to avoid possible null pointer dereference
for targets API is not supported.
Change-Id: I2c78e16a6796b0b09834cb91749244357f3de753
CRs-Fixed: 2793284
Currently, there is no provision for dynamic dwell time control in 6G.
Update existing driver commands SETDWELLTIME and GETDWELLTIME to
support 6G.
Change-Id: Id284097e300f3ed45557ebe7ea2287e0da9a485b
CRs-Fixed: 2789720
Introduce QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS
that represents the triggers for which the scan scheme from
enum qca_roam_scan_scheme has to be applied.
Change-Id: I9d620a0ada16093042befaf8ae2e80437369c256
CRs-Fixed: 2785260
Add a new cdp datapath ops - mscs_ops for Mirrored
stream classification signalling feature. This function
will be invoked from ECM flow acceleration manager
Change-Id: I749623846395057b6ea8328c881efa8733700b0e
If frames from the same FISA flow goes into different REO2SW rings, it
will result in an unexpected FISA behavior. This can happen if the
frames have been reinjected from FW offload module since FW will select
REO2SW1 ring. If the same flow frames hash to other REO2SW rings, then
the same flow UDP frames will do to different rings.
Reo_destination_indication of 6 indicates if the frame has been
reinjected from FW. If so, then continue to deliver the packet without
FISA.
Change-Id: I14a17a10d04909adfb30557d58beb1610e59bf70
CRs-Fixed: 2790292
Non-Tx beacon generated in driver contains TX
beacon capabilities instead of capabilities
advertised as part of non-TX profile in MBSSID IE.
Copy the non-TX beacon capabilities from MBSSID IE
profile to driver generated non-TX beacon.
Change-Id: Iecf63b959176bac8d60055e6b77082a6f3ec117c
CRs-Fixed: 2789394
In teardown API update logical delete state to peer
before deleting AST entries of peer. Also in delete
AST API use __dp_peer_get_ref_by_id to get the peer
Change-Id: I6db227a284cf3726cc241ebc98386230eca58fcf
Use CM_PREFIX_FMT and CM_PREFIX_REF to print connection mgr logs
instead of CM_PREFIX_LOG to avoid confusion.
Change-Id: I06c0009804d9c49da4916a120b6dc448ea28fdb6
CRs-Fixed: 2791198
QCA6490 expects twt_ap_pdev_count 2, to bring up twt sap on 2g.
Currently twt_ap_pdev_count is derived from num of radios and is
1 in case of MCC.
Configure twt_ap_pdev_count value equal to number of phy
advertised by firmware in wmi service ready ext event, configure
under flag WLAN_TWT_AP_PDEV_COUNT_NUM_PHY if defined in kbuild
Change-Id: Ib3fa81d140b473daa253e32cde2e11aad1b78b4d
CRs-Fixed: 2786512
In structure wlan_objmgr_psoc, member wlan_active_vdevs which is an
array of size WLAN_UMAC_PSOC_MAX_VDEVS and type uint8_t is neither
populated nor used anywhere. Remove this unused member from the
structure.
Change-Id: Ib2e49e42fe986358c26fa95a9287b20297b0eccf
Currently driver can handle only one radio stats event,
if the size of radio event exceeds more than the size which
can be accommodated in single WMI event in that case FW needs
to send multiple radio stats events.
Add support in host to send WMI capability to indicate FW
that host supports the multiple radio events.
Change-Id: Ifb89419715c87959095c0c88a23c8dd650d456e7
CRs-Fixed: 2783251
