In certain scenarios, ICP init response
was not received on time.
Hence added retry logic to counter ICP
init failures.
CRs-Fixed: 2836166
Change-Id: Ibfab1e44e320dbcb1e1b47ba91d91c5ef2f9b3c1
Signed-off-by: Shravya Samala <shravyas@codeaurora.org>
Sometimes multiple io cofigs comes before start_dev. Therefore even we
force disable UBWC compression at start_dev time it can be override by
those io configs. Therefore moving disable UBWC comp logic to acquire
time. Acquire time a flag is sent if we have to enable or disable ubwc
compression, based on this we set bus side ubwc_disable flag. When ever
we start the WM or update the WM UBWC config we check this flag and
based on this flag we override the ubwc_mode_cfg register.
CRs-Fixed: 2833514
Change-Id: I8efc3f7abd53e0757f8e77ac0788e303f7c695b9
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
Sometimes, the cpu load is very high, then the devcies
stream on will be delayed, but the CRM watchdog is already
enabled before streaming on, then we will have a chance to
notify SOF freeze issue.
This change pauses the CRM watchdog timer before streaming
on sensor and after stopping ife, when we can detect the
stream on and stream off delay, but don't notify error,
also can detect the real SOF freeze issue.
CRs-Fixed: 2804587
Change-Id: Iccaee837930ea22290b109eff45b05300d844312
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
This change add titan hw version checks in csid, vfe and icp
camera drivers for Yupik camera.
CRs-Fixed: 2825675
Change-Id: Ibb704efa5eae327fc7c376328ceafc45a8217f44
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Add register information. Initial QoS settings info to program
camera static settings for chipsets having camera V165_100.
CRs-Fixed: 2825675
Change-Id: I433cfbe50705f09b961770371a3d3f29ff5f348c
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Add support to dynamically switch pix_pattern of read clients
based on data received in each request.
CRs-Fixed: 2811530
Change-Id: Icb3ebd33cae59b8db87bc0011d6560492ad29c3a
Signed-off-by: Rishabh Jain <risjai@codeaurora.org>
This change prevents excessive logging. WARN_ON() prints
call stack which cause excessive logging in tasklet.
Removes WARN_ON() in error case where buf done irq for
a request exceeds actual number of out port.
CRs-Fixed: 2828453
Change-Id: I020cc74b73841e9599c4d1570829c6b086e768ec
Signed-off-by: Chandan Kumar Jha <cjha@codeaurora.org>
Use the a5 firmware name from soc info instead of hard coding.
CRs-Fixed: 2825675
Change-Id: Ifb089857777ae4d48c1c7ab6f12259a711c46152
Signed-off-by: Vikram Sharma <vikramsa@codeaurora.org>
Reduce logging as part of error handling to avoid
flooding kernel log with excessive log. Apart from
that send feedback to client irrespective of cdm
reset status.
CRs-Fixed: 2826285
Change-Id: I9b0d8c6f64ced4972bb20e26774508573c815e4f
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
When multiple frequency slaves running on a same I2C bus,
then there is a chance of overriding I2C bus frequency
even if another I2C operation is running. This could lead
to CCI timeout at driver level. Updated synchronization logic,
to properly update I2C clock frequency, only when no other
I2C operation running.
CRs-Fixed: 2815310
Change-Id: Ia341d7cda118497bf1acea8ea59f7f03124f31c3
Signed-off-by: Anil Kumar Kanakanti <akanakan@codeaurora.org>
In case of any error IRQs encountered during stop, there is
no need to notify them to UMD since the entire pipeline
would be reset prior to next session start. With this change
we transition to HALT state and then issue stop.
CRs-Fixed: 2825121
Change-Id: I9535439d1a29e3b6f8da968b60e5b2b5bc32c1bf
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
In case of pix/line count error, print the configured
pixels and lines directly from the format measure config
register as opposed to the data from the blob.
CRs-Fixed: 2825795
Change-Id: I8cdfb5afbd8cf573abeb7d4e3522d24fa37d8201
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Fixes the null pointer dereference in the get Constraint error
function.
CRs-Fixed: 2825045
Change-Id: I72d8e51257fcfeca8386e626cf04db448bf3b483
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Currently violation in FULL IFE on IPP/PPP path is treated
as overflow in HW_MGR. Update the err type correctly.
CRs-Fixed: 2815428
Change-Id: I2bbcdca03afc5be48281c39c50ecb32342ad7fbe
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Bus vfe out array is getting accessed beyond allocated space.
Check the index with max supported number vfe out values before
accessing the vfe out array. Use the proper index to access
the vfe out array.
CRs-Fixed: 2819234
Change-Id: I21865cb7025cc88f6b6015576eadd81eb3819eab
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
OPE driver allocate memory dynamically to store cdm
acquire and bw data in acquire time and don't use later.
These memories can be freed before returning from acquire.
CRs-Fixed: 2827058
Change-Id: Ibf87282862f2ae4655da3c69016bedb7f96bca1c
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
If buf done error come for same applied request id then log
only once. Change the bufdone deferred logs to debug logs.
CRs-Fixed: 2824276
Change-Id: I870708bfb0c4f0ad0a1fade3a7e334551d055c73
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
In corner case, there is a chance that userspace can submit
request while flush is ongoing. In some cases submitted request
can get flushed and corresponding data structures memory gets
freed.
Add a logic to check for pending request before submitting request
to cdm hw.
CRs-Fixed: 2815901
Change-Id: I74096201e204f204c4f15d14698b4e9af6435f55
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Frame header is not enabled on all WMs. Currently frame header
is piggy backed with the first WM for which buffer is configured.
It is possible that this WM does not support frame header.
This change tries with all WMs till it finds a WM that supports
frame header.
CRs-Fixed: 2823154
Change-Id: I300cb449cdeebc74300d100dfdd8dbe50bec9bce
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
