On monaco RPM uses "ldom" as the reasource name for PM8010.
Update the same in PM8010's regulator configuration.
Change-Id: Ic0f70d5bf16017d99cbee62d0e05fd15b131cf17
The 3V eLDO controlled by gpio#53 is always ON, to avoid any conflict
with the ALS sensor that is also using the same GPIO.
Make use of a dummy regulator for the touch 3V supply.
Change-Id: Ie40ab4c27a9f10222ce4fbc77f51e65acefeff8b
Enable modem pa sensors config rules only for yupik QRD and
remove for other platforms as per recommendation.
Change-Id: Icfb54a900b17fd9f6bfc1c7eb59dfa34bbdeba2b
Add thermal overlay devicetree configurations like pmic alarm
sensor thermal zone mitigation and BCL thermal zone mitigation
for holi-pm6125.
Change-Id: I20fe0880938bde6a62a45a6f11b3b64ae8e847fb
Also add RPM managed regulator devices for QCS405 so that
the client requests made for these regulators are aggregated
by the RPM processor along with the requests from other
processors.
Change-Id: Ie9d22bd3b2b080b691f21cecedd337aacf3d3702
Add support for smb1394 for holi-pm6125 mtp and mtp-usbc
platform, while at it remove smb1398 nodes for the same.
Change-Id: Ie0bce0b289739d1a206eeb6585dac8fca160f63a
Correct interrupt name for PM6125 ADC_TM to match the name
expected in the driver. Remove VCOIN channel from VADC as it
is not used.
Change-Id: I1b96fae160b82bf3378b0c72960ecb6fb76c4043
Update the LDO2A and LDO3A min-max voltages for holi-pm6125,
While at it also add S5A regulator as per HW recommendation.
Change-Id: I1b4f6868335d7d4f8657319047eb38c694b32c7f
Some EPs are capable of initiating Gen switching request. This
capability is only required for direct attach. When these EPs
are connected to downstream ports of switch, disable this feature
by not creating BW scaling MHI event ring.
Change-Id: Ifdcd90329201f6a180cd8ddece671c7746e5c635
With overlay support observing regulator labels references
from previous definations in "holi-regulators-pm6350.dtsi"
are not getting overridden from "holi-regulator-pm6125.dtsi"
causing disable clients to refer to disable nodes. Fix this
by using alternative label name for clients using this
regulators.
While at it disable both device and resource node for
holi-pm6125 regulators. Also only disable nodes which are
present on holi and not present for holi-pm6125.
Change-Id: Ibfd931e91eee9380fb14026a2569ef592c96a9c6
