This change adds missing cdm debug status register
offsets for cdm version 1.0 that are read during cdm hang.
CRs-Fixed: 2898496
Change-Id: I3a83d13f6b18231561973054845cb87b1ffc4b2d
Signed-off-by: Chandan Kumar Jha <cjha@codeaurora.org>
This change is to support multi links in sync mode. Supports dynmanic
switching to select master link in rtb and sat use case in sync mode.
Supports sync logic for rtb and sat use case in sync mode. Apply
requests for all links is triggered only on master epoch.
Supports bubble recovery and sync logic for different pd links in
sync mode.
CRs-Fixed: 2783209
Change-Id: I81d1d0d37aa0d6e18c19ca87eac51ef3f160abfb
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
This change is to add horizontal and vertical binning if qcfa binning
is enabled. In qcfa binning, horizontal and vertical binning should
be enable along with qcfa binning, whereas for only horizontal and
vertical binning is required for bayer binning.
CRs-Fixed: 2890967
Change-Id: I096d170cfb7a4a725deaffe5dc3996b23070040f
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
Apply the flash at EOF and apply the other devices
at the EPOCH of next frame, then the flash can
cover all the exposure zone of current request.
Add the inject delay for SOF and EOF separate, then
we can use inject delay for more flexible frame
skip control.
CRs-Fixed: 2820683
Change-Id: Ic6a58327a0ae44c54190884ba42ea7926ec7c90e
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
PHY status dump analysis need to be done to check issue
with transmitter when SOF freeze occurs as recommended by
PHY HW team.
CRs-Fixed: 2890861
Change-Id: Ibaabe1c7e5968aa384313619e8a21f589f1d880e
Signed-off-by: Shankar Ravi <rshankar@codeaurora.org>
While csiphy is shutdown abnormally, we also need to
program off csiphy hw common register, to avoid the
residual of active csiphy hw cnt during monkey test.
CRs-Fixed: 2861912
Change-Id: I1767c729b205a96e5f298265e65b37150dac03b6
Signed-off-by: chengxue <chengxue@codeaurora.org>
This is a fix to handle line corruption on RDI stream by giving more
priority to IFE traffic. This is specific to SHIMA CAMNOC.
- Set Priority for IFE (RT) stream to P6.
- OT = 55 for IPE RD.
- IPE clk to be capped to SVS.
CRs-Fixed: 2887253
Change-Id: Ica574742052f018e94072240a0fd1d08be223727
Signed-off-by: Alok Pandey <akumarpa@codeaurora.org>
Allocate memory for flush req array dynamically based
on the list count, in case the req count bigger than
the size of req list.
CRs-Fixed: 2835525
Change-Id: I7e48fb9dc7815cb991c84195e761a3c3f1c26b48
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
Add support for CSIPHY fuse using software fuse info from CPAS.
CRs-Fixed: 2876091
Change-Id: I7010a321e61561dff269c954dc8f83ca0b08956d
Signed-off-by: Anil Kumar Kanakanti <akanakan@codeaurora.org>
SHDR case has two ISP instances, if one of them
apply req failed sometimes, but the other one is
good and the buf done has been handled successfully,
then we don't need to apply the req again for the
successful ISP.
CRs-Fixed: 2842495
Change-Id: I3dfbb455244daa0d155858dd59f4a661fd3b87cd
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
In sHDR case, the trigger cnt may be different when one of the IFE
meet bubble or irq delay issue, then reset the trigger cnt when
we find the trigger cnt is different.
CRs-Fixed: 2857614
Change-Id: Ie02fd7204bebd16d32d7a277ac1f2e45f8357dd9
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
We will get invalid req from flush_list if the
flush list is empty when we get each req by
list API list_for_each_entry_safe. This change
checks whether flush list is empty before
accessing this list.
CRs-Fixed: 2885145
Change-Id: I9b2828b03706a0f7412828905cc0a9e28d15fd76
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
Adding per frame register dump for camera version 2 targets.
CRs-Fixed: 2778464
Change-Id: I0f45e021959d1b812807f9e7500645f2d8365f54
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
This change is to update state of all acquired CID resources state to
Reserve on disable CSI2. It will allow, proper release of all CID
resources even in case multiple CID for single CSID.
CRs-Fixed: 2883120
Change-Id: I0630c08a269bfebc6867dd039e752693ffe97ba9
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
In apply failure due to congestion and if not recovered, warn logs
causing excessive logging issues. Change the warn logs to rate
limit in apply failure due to congestion.
CRs-Fixed: 2884313
Change-Id: Id46a0cbe6a248a9186a6267577374f4fbadcf64f
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
If there are any reset errors for the CDM, CDM should
send error to UMD upon reset failure. Updated the
error status with relevant error code.
CRs-Fixed: 2882732
Change-Id: I12e746f71b1a294aa4e7ef540f39aec91fb44648
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
Kernel apis provide information fault caused pid and mid data.
Handle the JPEG smmu fault using pid and mid
data. Based on the mid data, dump only corresponding port
info which caused the fault. Pid and mid values are target
dependent, these values will be updated on the jpeg node
dt entries.
CRs-Fixed: 2878371
Change-Id: I0d2d1e474d4662707d85efd022ccce87e67f0d93
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
Partial lighted frame can be observed if flash packet is getting applied
at eof instead of epoch. This change make the flash packet to be
applied at epoch instead of eof.
CRs-Fixed: 2853936
Change-Id: I77dac7c0b8cb8149f26c5f89cced590bc3b957ee
Signed-off-by: Tony Lijo Jose <tjose@codeaurora.org>
Currently cdm driver is updating work records
in case of all the interrupts received, but
decrementing only when it schedule workq for
inline irq interrupt. This causes the mismatch
in work records and return incorrect work record
count when cdm client check the cdm hang detect.
Updated hang detect logic in cdm driver.
CRs-Fixed: 2878695
Change-Id: I7039422bf573a7105c16ac2f752eb235c377bfee
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Added changes to dump new IQ modules as well
in OPE during page fault and hang scenario.
CRs-Fixed: 2878214
Change-Id: I97e7d4ee2ed9899ed299155c9aca8b094dff18f0
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Add logic to dump stripe info and wait event status at the
time of cdm hang.
CRs-Fixed: 2878214
Change-Id: Ib9892b0273e4436988c5f1384d18d60d29529c94
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Some ISP hardware id instances are disabled on some target skus.
Cpas driver has fuse information based on the dtsi entries.
ISP hw driver queries the cpas driver whether hw instance is
supported or not. If ISP hardware is supported on the target then
continue the isp hardware probe.
Fix for get HW feature:
When feature is enable or disable type and HW mask is not indicating the
HW index, do not update the supported. By default it is supported.
CRs-Fixed: 2825675
Change-Id: I777e5790060388458562e7a53fea8a7324ffa9d3
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
