Don't set LPOVERRIDE bit when tupwr-disable is true to avoid the cpu hang
issue.
Change-Id: Ie12b6faa3a39e35fac1566690771321a79e99bae
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
Accessing some of the memory of the device while the device is
resetting or suspending may cause unexpected error as the HW is still
not in a stable state. Prevent this access to guarantee successful
read/write memory operations.
Change-Id: Idbf046e21726ec8d074161f75643f34137d6ec24
Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Lior David <liord@codeaurora.org>
The pattern source check before loading predefined effect is incorrect.
Correct it.
Change-Id: I8026f6ee24ce17dfe43bc514eeb526300af99746
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Currently when brightness is zeroed-out for a flash/torch device its
"configured" flag is set to false. Hence the flash/torch device is
ignored when its switch is disabled. This leads to the corresponding
LED channel left enabled. Fix this by setting "configured" flag to
false only when led strobe is de-asserted.
Change-Id: I46c640d3e0db8611343e2e67321db820161dd144
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
There is currently no interface for adding/removing memory to an
ION heap, so add one.
Change-Id: I68061feca3c29cd8f2370665f40f8005fb8765ff
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
ION clients may want to know about the security state of a heap
prior to allocating from it, so expose an interface for querying
the security state of a heap.
Change-Id: Ibf832792ffbc81b5b96b8ddbc507db5418a47928
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Add support for mapping VMID values to their corresponding
ION flags.
Change-Id: I827c4e7c4a1761fcc6c6b08f2855f490243d8ea5
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
add compat_qseecom to support 32bit process to call ioctl on a
64-bit system.
Change-Id: I7e9b1c3d0cc34e3794265aa21db69e346f40833c
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
Dependencies are available in build. Time to enable remaining
CVP features.
Change-Id: If34945f5d7ec1ad51d9b22c4c6cda37f65de84f1
Signed-off-by: George Shen <sqiao@codeaurora.org>
There are potential scenarios where the IPCC interrupts would have
been raised (and pending) during the bootloader stage. As a result,
the driver shouldn't be performing a reset as it would clear all the
pending interrupts. Hence, do not perform an explicit reset in the
driver's probe.
Change-Id: I1d45b20d539524900516532d968172d6b2c10b27
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Lahaina uses SDAM to store restart reason instead of PMIC PON register.
This change uses nvmem consumer framework to store restart reason.
Change-Id: Ib5d4406b7204b0c24992bd026f0f1a71f8b1e6fe
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Register with CPU Hotplug and Idle notifiers so that memlat
gets notified when CPU is being hotplugged in/out or when CPU
enters Idle state. The perf events should be recreated when the
cpu is brought back online. Also do not update the counts when
the cpu is hotplugged out or when it enters Idle state.
Change-Id: I35a05be0a43a4519282d5787e6c87d92e5bec1de
Signed-off-by: Rama Aparna Mallavarapu <aparnam@codeaurora.org>
rpm_msgs address is calculated from memory allocated during write_batch.
Correct the offset from where rpm_msgs actually starts and assign req
pointer to point to correct address.
Also add list_del before freeing memory in invalidate_batch.
Change-Id: Idca43fe73bd238e90911158b08b3889c001e1123
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Cancelling histtimer after enabling local irqs can cause
low sleep length to get calculated during next low power mode
entry.
Enable local irqs after cancelling histtimer.
Use hrtimer_get_remaining before cancelling timer.
Change-Id: I735770f779c5760acc6b62cb65811b21244d0e99
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Currently rpmh dirty flag is set for all cases regardless of
data is really updated or not. Correct it to update for
only those cases where data is updated.
Change-Id: I2c87ffbf1bae23ddd4b4cb7dced213cac267df59
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Add the HDCP QSEECOM header file as it contains definitions used
in client drivers such as the DisplayPort driver.
This implementation is based on a snapshot of the HDCP QSEECOM
module as of this commit 86411ada84786796 ("drm/msm/hdcp: Update
HDCP QSEECOM to start auth on user command") on kernel-4.19.
Change-Id: I6481e189dcedace9a571ce06db079c63fab1ef01
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
This change enables USB Mass Storage class driver and gadget function
driver to have USB mass storage functionality in host and device mode.
Change-Id: Ie9d8c3ca30f68ce75909eae16897b39c2a24374f
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
