Correct the modem data for wdog bite handler, otherwise it will access
a invalid subsys.
Change-Id: Iedd7b85597fa95d283d3a7b9bdd59c8a7c765792
Signed-off-by: lijuang <lijuang@codeaurora.org>
Add Null check before dereferencing dev for set FW log mode,
force wake request & force wake response. Add ERR_OR_NULL check
for wpss load API gets called for wpss subsystem. Check for qdss
memory segment length.
Change-Id: Id4a43fa9ae332faa7f5741f338d985db8272d17a
Signed-off-by: Vijay Patil <vijaylil@codeaurora.org>
Currently driver is just proceding further if start xfer times
out for ep0. Start xfer failing for ep0 indicates that the
controller is already in bad state and it can access unmapped
address leading to SMMU fault. Prevent this by marking this as
an error event and restart USB session.
Change-Id: Ia46387e16a79318ad945079ced7209a8f2bf47ef
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
This change is for general scheduler improvements.
Change-Id: I37d6cb75ca8b08d9ca155b86b7d71ff369f46e14
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
When the battery profile is loaded first time, update the
clear soh property so that soh algorithm can clear stored
parameters.
Change-Id: Idfc25c589f8422b76768229e52dab7d670c6b231
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Add iio property for clear soh to update userspace
on first profile load.
Change-Id: I7a9c2cf886ad7da76f6156c3ac12828bf37fe78a
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Current scale debugfs entry is quite unstable and used barely.
Hardware cmd timeout and some other issues are being seen when trying to
modify the scale entry.
Remove unnecessary scale debugfs entry to avoid such issues.
Change-Id: I9486a9fe7498ba1855153202415fca80debb13f9
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Git-commit: 032e288097a553db5653af552dd8035cd2a0ba96
Change-Id: Ic90930c8ff99f2a3749c79a268f0a410827e485c
Signed-off-by: Elson Roy Serrao <eserrao@codeaurora.org>
Scale PCIe RC Max Payload Size (MPS) based on its capability
Max Payload Size Supported (MPSS). Configurating RC MPS to the
largest setting possible will help improve overall PCIe link
bandwidth performance.
Change-Id: Ice31cf0ab97fd7dd83736eea77e42ff00fb3148c
Signed-off-by: Tony Truong <truong@codeaurora.org>
Update Max Payload size (MPS) for all child PCI devices of RC.
Child PCI devices will have their MPS scaled to at most RC MPS.
Configuring all child PCI devices with the largest MPS possible
will help improve overall PCIe link bandwidth performance.
Change-Id: I871b49a5ec07d020a445a59f622ceec6061dfc26
Signed-off-by: Tony Truong <truong@codeaurora.org>
In order to tackle the spurious interrupts coming from the host
on an invalid channel, the channel doorbell interrupts are
disabled during initialization phase. These are enabled after
receiving the start command for a particular channel.
Change-Id: I12bb315bcd249383ed442ad969e84c9eef25a324
Signed-off-by: Abhinab Abhinab <aabhinab@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
The change is to check for error code from cmd processing in case
of db pending cases, to avoid rd_offset increment.
Change-Id: If213297fe02ec1087bfab572f5af97b1e7bb5791
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Freeing cmd_ctx before ereqs will result into NULL ptr
dereference. Freeing memory in proper order.
Change-Id: Ie999017685574e940685eee3b7c205ebe1672664
Signed-off-by: Nitesh Gupta <nitegupt@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Channel interrupts are seen on device even before,
channel ring is initialized. Queuing pending work
without checking ring status can lead to processing
of spurious interrupts. Adding proper checks in place
before queuing channel doorbell.
Change-Id: I3ccd7302b535d2b8ef63eada9d7a1fe553dccdaa
Signed-off-by: Nitesh Gupta <nitegupt@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Device allocates ring memory during mmio initialization, this
causes 128 event ring elements to be created as MHICFG
register may not be updated by the host. This causes memory
to get exhausted leading to an MMIO init failure.
The Change is to allocate ring memory during M0, during which
MHICFG register is bound to be updated by the host.
Change-Id: I04a0e0ed79a46f16f96e2be4c5c68cba9ee2c99d
Signed-off-by: Subramanian Ananthanarayanan <skananth@codeaurora.org>
Signed-off-by: Gauri Joshi <gaurjosh@codeaurora.org>
Since pcidev_table is no longer used in the driver
get rid of the table entry from msm pcie device
structure. Also remove unused structure members
from msm_pcie_device_info. Since device table
is removed, rename msm_pcie_config_device_table
to msm_pcie_config_device_info.
Change-Id: I5359cc0f85d6b7f9f069f7decc3bc67105543abb
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
All endpoints and bridge are performing their config space save
and restore. Hence root complex driver does not need to perform
the same on behalf of them. For root complex use PCI framework
provided APIs to perform RC config space save and restore. Save
golden copy of the RC config space upon enumeration and use it
to restore RC config space in case of link down. Get rid of all
custom APIs for saving, restoring and dumping of RC and EP config
space entries.
Change-Id: I466e26aaaee0ae317323aae0c535c3319f95e681
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Only start the sw mode when pcie_path is configured as sw.
Change-Id: I3b9fb890008760b0a25827bb039cd378512f4efe
Signed-off-by: Yuanfang Zhang <zhangyuanfang@codeaurora.org>
This change enables DRM and GKI_HIDDEN_DRM_CONFIGS for QPIC display
on sdxlemur.
Change-Id: I856d26e0dafcffd523eefc660f00612448a4529f
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Add code to notify mhi about link down.In scenario of link down
recovery failure with SSR enabled, cnss-daemon posts a QMI req
during subsystem shutdown execution, the mhi layer tries to access
doorbell register to process the qmi msg but it leads to NOC error
as pci link is down. So added code to notify mhi about link down
to avoid NOC error.
Change-Id: I3ccc2cbda37e271f14f3821bb055db3107dac228
Signed-off-by: Mohammed Siddiq <msiddiq@codeaurora.org>
NR_KERNEL_MISC_RECLAIMABLE contains the info in pages but accounting is
done considering it as bytes. Fix it.
Change-Id: I99a3bd43b7b77f6b137e1cc4c1854392d4a47635
Fixes: 5a5b186dfb ("taskstats: add support for system stats")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Modify the gpio, function and group binding to make driver
in sync with TLMM specification.
Change-Id: Ia9bec2e870983b6f59aa694592883c1a32da2304
Signed-off-by: Akshaya Bhat <akshayab@codeaurora.org>
The user watchdog was waiting the hardware watchdog bite by
stop petting it. But in the cpu suspend scenarios, the auto petting
by hardware prevent the expected watchdog bite. So add a new user pet
timer to explicitly trigger the watchdog bite by software when the user
watchdog petting is not happenned before timeout.
Change-Id: I71b1139192baa960ae00f7a27c630aedaf5a3ffa
Signed-off-by: Maria Yu <aiquny@codeaurora.org>
send early notification to all MHI clients devices on PCIe
linkdown recovery when device supports RDDM dumps. so all
client channels registered to MHI will receive completion event.
Change-Id: I3c25d69b7d43afe2701fe5fae705533faf6f4dd1
Signed-off-by: Vivek Pernamitta <vpernami@codeaurora.org>
Add binding support for flash type for khaje camera.
CRs-Fixed: 2938804
Change-Id: I844b59125bb08034b1937422ac29485d5a7a2746
Signed-off-by: shiwgupt <shiwgupt@codeaurora.org>
On some platforms, L1 in HS mode is not supported.
Add support to disable L1 in HS mode on those
platforms by default through dt.
Change-Id: I624bde1e091e6e864bf7f7af93804c3728374d0d
Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org>
