Propagate Synopsys MSI support from msm-4.14 for PCIe controller
and PCIe MSI driver. Changes support:
1) QGIC MSI/MSI-X
2) Synopsys MSI/MSI-X
3) PCIe controller low power modes with MSI
Change-Id: If7a2e1980233e032325ffec597284b9164162407
Signed-off-by: Tony Truong <truong@codeaurora.org>
Certain GPIOs are reserved for secure world and cannot be accessed by HLOS.
Supply "reserved_gpios" to msm_pinctrl to mark these pins as invalid.
Change-Id: I07807f37adfd6d90e7b1bdc72b2106520f378b02
Signed-off-by: Mayank Grover <groverm@codeaurora.org>
Add check to verify whether memory is allocated properly or not
and return error if its failed to allocate coherent buffer.
Change-Id: I234a637d20228d047f6fc11d374b6f13f28fed03
Signed-off-by: Gaurav Kashyap <gaurkash@codeaurora.org>
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Enable TSENS and different cooling device drivers for holi
to monitor junction temperature and handle different mitigations.
Change-Id: I04528379b33532cfc237fc977617aad8c8c022d2
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
As per the kernel doc for usb_ep_dequeue(), it states that "this
routine is asynchronous, that is, it may return before the completion
routine runs". And indeed the dwc3 gadget driver recently updated its
behavior to place dequeued requests on to a cancelled list to be
given back later after the endpoint is stopped.
The free_ep() was incorrectly assuming that a request was ready to
be freed after calling dequeue which results in a use-after-free
in dwc3 when it traverses its cancelled list. Fix this by moving
the usb_ep_free_request() call to the callback itself in case the
ep is disabled.
Change-Id: I51751e002ad86b226d9f0d872c66a77e94e8cab7
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Enable F_UAC2 USB ConfigFS driver as a GKI module on Lahaina.
Change-Id: I72ba962aa13832091ad78db9404bddf4c29df066
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Simply changing bool to tristate should do the trick.
Change-Id: I12916801778c4cc2150f9f2c820095a09b104851
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Add SS/SSP descriptors for the UAC2 function.
Also fix the audio quality issues by increasing the
number of USB_XFERS.
Change-Id: Ie94aee43dd52b0b711778420e485af72730dd28b
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
As per the UAC 2.0 specification, ASYNC data endpoint is required
to have feedback data endpoint. Since driver descriptor does not
include feedback data endpoint, change endpoint bmAttributes for
data endpoint to represent as SYNC instead of ASYNC. This allows
device to enumerate on windows 10 PC.
Change-Id: Ied3c2c94a8cd1cc130bb77484641f0d8d5ed642d
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
This function can be called to stop an endpoint handled by the
secondary execution environment just after the HCD is removed
(e.g. Type-C cable removal), after which the QMI sound driver
proceeds to unmap transfer ring buffers from DMA. However,
although the RH state indicates it is not running, the controller
may not yet be fully halted and may continue to access now
unmapped memory. Replace the HCD_RH_RUNNING(hcd) check with
xhci_check_args() which includes a check for XHCI_STATE_HALTED,
so that a Stop command can still be issued.
Change-Id: Ie17882cdcfeea13fbdf7b1cd1353296d5966c798
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Update the symbol list with APIs required by audio drivers.
Change-Id: Iee9bc353834e3384c19406dc0adfa37f75390a39
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Add support to distinguish PMIC4 BOB from PMIC5 BOB using
"qcom,regulator-hw-type" device tree property as the MODE_CTL
settings of PMIC5 BOBs are different from PMIC4 BOBs.
Change-Id: I5162e514487b255c33eb66e75a44a40fe92d50a6
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
During scan operation some channel are getting scanned
with rssi value less then the rssi threshold value.
Append the channel in scan list if it found with rssi
greater or equal to rssi threshold value.
Tune back to the original tuned frequency when scan
is cancelled in between.
CRs-Fixed: 2734678
Change-Id: Ib431ce70e9c32b2ddf3f991b41abc0c23c74e820
Signed-off-by: himta ram <hram@codeaurora.org>
Increase the socket recvbuf for the ns so control packets are not
dropped in heavy traffic situations like ssr. This change will not
actually set the recvbuf to INT_MAX but to the system defined rmem_max
for sockets.
Change-Id: If56eac164a7ea3f0857170d3966c3c174a7460ae
Signed-off-by: Chris Lew <clew@codeaurora.org>
Update cnss platform driver to use bus bandwidth voting
data as configured in device tree file.
Change-Id: I327c41613a6ca1d53550cf6d266db90b46f7bc77
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Disable parkmode for Gen1 controllers to fix the data stall issue
in host mode.
Change-Id: I28694a533543b14f752e195b722aafcb83cc4f1d
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
