Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_UPDATE_SSID
to update the new SSID in hostapd. NL80211_ATTR_SSID is used to
encapsulate the new SSID.
Change-Id: I0c6e00afefa8cf00ceb58b4cdf72958f2ece8307
CRs-fixed: 2774888
While sending me packets, if failure is encountered
either while preparing tx desc or while enqueuing
to h/w,the cloned nbuf's must be freed.The unmap
must be done only if the failure is encountered
for all the me buffers.
Change-Id: I08dbae1fa1820b4fb31119f65e939aead829321b
While preparing raw packets for transmission, the count
of nbuf belonging to one mpdu must be less than the
number of segments.This makes sure the frags array inside
seg_info does not go out of bounds.
Change-Id: I7fffba7f64da274aa73c558cfc63d90f4419a04d
Increase CE2 host ring size to 512 for QCN7605 to avoid
ring full condition in FW in debug build.
Change-Id: I900611487696e3e83cd7adc72f10cd2cdcb15ead
CRs-Fixed: 2778941
wmi_unified_register_event has a return type of QDF_STATUS.
Handle the same return type in the following callers:
1. target_if_dfs_reg_ocac_event
2. target_if_dfs_reg_offload_events
3. target_if_reg_phyerr_events_dfs2
Change-Id: I622f6f6c4ff3b428a6407b6526e823083cc1fd8a
CRs-Fixed: 2767507
In addition to firmware capability, add INI param to decide FST
placement in CMEM.
Change-Id: Icc5fdfa49e35665b59efce3fc1f1855d84c16140
CRs-Fixed: 2778898
Firmware advertizes its support to place FST in CMEM,
export this capability to DP.
Change-Id: I265246bcfd38a36e34c4ede66e117a92bb185032
CRs-Fixed: 2772238
Firmware advertizes the capability to allocate CMEM memory for
FST via a WMI service flag; adding the support for the same.
Change-Id: Ic33bf0584f5ce4880fdfe5abe8fd4cf2a653a06e
CRs-Fixed: 2771256
Adding write/read APIs for accessing the CMEM.
Currently in QCA6750, UMAC and CE windows are statically mapped,
a new static window for CMEM is added for CMEM transactions.
Change-Id: Ie10b33a6f468c6e4db314ea85856414962ef29e3
CRs-Fixed: 2771193
CMEM FSE details like offset into CMEM where flow search table(FST)
is allocated and the size of the FST will be sent by the firmware
in response to FSE setup message. Adding the logic to parse the
response message and update the CMEM parameters in the SW FST.
Change-Id: Id1dd4b59be02c175da3fc6fcb5ed56e6f491133a
CRs-Fixed: 2771187
Adding data structures required to place FST in CMEM.
CMEM is an on-chip memory in QCA6750.
Change-Id: I39d47d6f0514941497d41301643344ee3b2dad30
CRs-Fixed: 2771186
Skbs allocated for CE1 ring are of size 2048 bytes. On
receiving PPDU stats HTT message, skb is pulled for 8
bytes corresponding to the HTC header length. As part of
dp_ppdu_stats_ind_handler, skb len is set to HTT_MAX_MSG_SIZE.
In the case where skb allocation is exactly of 2048 bytes,
including HTC header length, the aforementioned set_len
causes the skb to be expanded due to lack of tailroom.
This causes the skb data pointer to be changed which results
in invalid memory access.
Fix is to remove the qdf_nbuf_set_pktlen as skb len is
appropriately set by HTC layer.
Change-Id: Ied68c30456dc0e263ccfd03102962233a0e43d9f
CRs-Fixed: 2777516
In current code, coex psoc obj is initialized in psoc open, the
configurations will be cleared in psoc close/open during
idle shutdown/restart.
To keep the configurations during the entire lifecycle of psoc,
initialize coex psoc obj when psoc is created.
CRs-Fixed: 2714050
Change-Id: I3cda4c7fd1c0ac482d44a9e80df342a8255fca9d
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
Maintain the peer object reference while delaying the processing
of peer frames.
Change-Id: Ia3df18f1281403c6ed36bfbc307b6928d3db9040
CRs-Fixed: 2769113
While creating sg frames,if map fails for a fragment,
the previously mapped fragments must be unmapped.
Also, the nbuf mapping should happen for headlength.
Change-Id: I218efa60be7100a661da7bc3783fa25e5203a273
Currently, gRoamBeaconRssiWeight is not used in HOST or
FW.
Remove logic to pass value of INI gRoamBeaconRssiWeight
to FW.
Change-Id: Ifa1472ef413d20d0e54649bc24dd6c8d6aac4bc7
CRs-Fixed: 2770278
Increase the num of entries in host side from 32 to 64
so FW can post more descriptors to host src ring
without hitting ring full condition. This is to avoid
back pressure issues in FW. The memory increase is
by 32*4K allocations.
This change is applicable to all HSP targets.
Change-Id: Ia973e13b9d9b2b682957ae19fc3f23dd49bef401
CRs-Fixed: 2761953
Currently we use a single timeout value of FORCE_WAKE_DELAY_TIMEOUT_MS
during hif_force_wake_request. A 50ms value is not enough in some cases
to bring MHI to M0 from M2/M3_fast states. This can result in a write
failure.
In certain cases, when not in an interrupt context, it should be okay
to wait slightly longer for MHI to transition into M0.
Hence, pass 0 as the timeout value to pld_force_wake_request_sync.
This API calls CNSS API which uses a blocking call - mhi_device_get_sync,
to transition MHI to M0, when a value of zero is passed.
Change-Id: I738bf9c4a9a83c943186445cba0174df18a45c74
CRs-Fixed: 2766674
Handle the serialization activation callback for connect and
disconnect and hw mode change resp for connect.
Change-Id: I553a650ea04daa5aa22ee43376b9359aed58c59f
CRs-Fixed: 2776022
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I29fd5e645c7b43c74e28494c83a6f7d460165e2e
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: If77efc6a5b451bf2cf4acb59d5a2126ce486f02f
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: Ia6d1781f2bf1eea85d4af357e37a00b1f78e264e
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I18c687ad0564ec70e28cf1f33f26501dda6ee5c5
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I1dc098793e1df658666343d4293fe3f1c02daf34
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: Icfa7946a447f3cfe8c6ce933a618e8dbb67bd6a0
wmi_unified_register_event return QDF_STATUS
Handle same return type in caller function
CRs-Fixed: 2764185
Change-Id: I87b1e6ee5e06e4e6af81395d977595335fe0bc5c
Use cm_sm_deliver_event() API to post the event from any
callback/req/resp from external modules. i.e serialization/hw mode
callback OR any resp from SB/other module or req from NB.
And use cm_sm_deliver_event_sync() API to post the event when the
SM lock is already taken i.e. internal posting of the event.
Also to avoid any race add the connect/disconnect req to the
connection manager request list after posting to the SM.
Change-Id: I98fc39be5ef51242553dae54448c3fe2cb9604d2
CRs-Fixed: 2776010
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
This records all the WMI events and commands, for all
PDEVs. Set WMI_EXT_DBG flag to enable this feature. Refer
Original Change-Id: I18e46f683e35912cad717ca3b9cc3d1885315362
Change-Id: I4c9bdfe6fdd195656ca0c01ca400eba595be24a3
CRs-Fixed: 2762266
During driver initialization, IPA TX and RX doorbell registers
are provided to wlan as physical addresses. With SMMU S1 enabled,
they're mapped to IOVA of wlan domain.
On driver deinit path, do smmu unmap for the two IOVA addresses.
Change-Id: I85ef1c3e99bef504abf09eebf9ace760b68f35f1
CRs-Fixed: 2768303
