Currently power save enable request user command is not
processed if the station is not in connected state and the
configuration is not saved hence station do not enter into
power save mode until the user command is issued after
connection.
Save the power save user configuration setting if the station
is not connected and start the auto power save timer for one
second timeout value after the station is connected to enable
the power save.
Change-Id: I6e17a8e989ca731ca008dcb46ca79c3a181ddff0
CRs-Fixed: 2371045
Change I4fdbf041b53b5f1606d324714f01088742a9307f ("qcacld-3.0:
Modify Kbuild to add new beacon header file") added new file
wmi_unified_bcn_api.c to Kbuild with flag CONFIG_WMI_BCN_OFFLOAD.
Add this flag to all dependent APIs.
Change-Id: Id3f77434179b739d5563b490d25b1c1386e1831f
CRs-Fixed: 2374758
Add protective check in driver to handle NUD events only if
subnet gateway is configured.
Change-Id: I5142e4d50490ea4726f337e19c8282359d23423d
CRs-Fixed: 2373552
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal update the signature of the following function
and add that function to the vtable:
- wlan_hdd_cfg80211_wifi_set_rx_blocksize()
Note that with this change all of the attribute handling in
__wlan_hdd_cfg80211_wifi_configuration_set() has been relocated to the
vtables. The measured cyclematic complexity was reduced from 103 to 6.
Change-Id: If5c3cfea7107f95c07867895a0bc7cc5d13fc7ac
CRs-Fixed: 2371594
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal update the signature of the following function
and add that function to the vtable:
- wlan_hdd_cfg80211_wifi_set_reorder_timeout()
Change-Id: Ia9c160eb81358b91feecb35b1cb8c097f90979cc
CRs-Fixed: 2371593
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal refactor the following interdependent attribute
handling into a separate function and add that function to the vtable:
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_MGMT_SNR_WEIGHT
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_DATA_SNR_WEIGHT
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ACK_SNR_WEIGHT
Change-Id: I1bd98a7c78b77791eb7737a928f2a22ced1af3c6
CRs-Fixed: 2371592
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal refactor the following interdependent attribute
handling into a separate function and add that function to the vtable:
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD
- QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_STAY_PERIOD
Change-Id: I13f76951f8f8451d70e1cc64f0116a8b6de163d0
CRs-Fixed: 2371591
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal refactor the following interdependent attribute
handling into a separate function and add that function to the vtable:
- QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION
- QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION
Change-Id: Ied99c92d708967713e6807d000485327ddba5fdd
CRs-Fixed: 2371590
One of the HDD functions with the highest cyclomatic complexity is
__wlan_hdd_cfg80211_wifi_configuration_set(). In order to reduce the
complexity there is a plan to replace the inline attribute handling
with a vtable-based approach.
As part of that goal refactor the following interdependent attribute
handling into a separate function and add that function to the vtable:
- QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY
- QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST
Change-Id: Ia10060a8a50b2e12f0eb7dc5ea5810f1751bce60
CRs-Fixed: 2371589
Previous psoc probe was not successful and in that case hdd_ctx will
be null so during next psoc remove check for validity of hdd_ctx
before de-referencing it and return safely in case psoc probe was
not successful.
Change-Id: I535965f9d60522245720952d2d7c14e09a91a334
CRs-Fixed: 2373865
In case of lithium dp there is no FW interaction in RX packet
processing and is HW REO ring based. So modify the ipa component
is fw activated api to return true if the ipa system pipes are
enabled.
Change-Id: I8cde4b0f696b75097e6b50f8b0c71c2b6fff6d6d
CRs-Fixed: 2374083
During SSR case in wlan_hdd_stop_modules(), ol_txrx_pdev_pre_detach()
cleanup the peer forcibly. Later RX Thread is getting closed as part
of cds_sched_close(). So chances of accessing deleted peer is there.
Shutdown RX thread before doing ol_txrx_pdev_pre_detach() to avoid
the chances of accessing deleted peer.
Change-Id: Iae27262396d8245eeb7a9b39cb678fad14815260
CRs-Fixed: 2349994
Make sure to initialize global target_if before soc create
as part of this psoc notifications are registered.
Change-Id: Id5491a2aac49450774532fe69ee24e18c9a7c594
CRs-Fixed: 2351426
Without CNSS module, function pld_pcie_get_user_msi_assignment return zero
even no msi config. For caller function pld_get_user_msi_assignment, zero
means TRUE. It will result to panic when deinit sequence called in
function hif_ce_srng_msi_free_irq. Return correcly value to avoid panic.
Change-Id: Id4480ef1db5357943162472963c4e78d7bfe64b8
CRs-Fixed: 2373130
Discard msdu and do not try to access vdev and vdev->pdev, because in
some cases, vdev or vdev->pdev is already freed, but some packet just
received right after wmi vdev delete command is sent.
Change-Id: Ia38768d800da97e361ffa1688ce53c25be6cd597
CRs-Fixed: 2372557
Define a new ini param to provide control over enabling and disabling
support for RTT.
Change-Id: I4fcc2370f758f80f00aaf04a4f23e24934d92f52
CRs-Fixed: 2364495
In the present scenario, the indoor channels are disabled
in both SAP and GO.
Disable the indoor channels only in case of SAP.
Change-Id: Ic66c3af211bd65846ec0ecaac8375d037f15af9a
CRs-Fixed: 2203719
In wlansap_update_csa_channel_params if channel is not present in
op class table the for loop become infinite.
Add check to break the loop if BW is 20 and still entry is not found
in op class table.
Change-Id: I6ef6bc138a8df0e18b54bd16a47eba23b437616d
CRs-Fixed: 2373915
Each cmd in serialization list holds a vdev ref by
I8d573ff5a25e6dff928b2708e51ad7b97e292277. When vdev is
destroyed physically, it means vdev ref count is 0, all
serialization cmds of this vdev are released, so no need
to registed purge calback.
Change-Id: Iea75707c88154e1e3e87369285b82d1288523e22
CRs-Fixed: 2373677
Memory allocated to FILS info is not getting freed in some
cases such as back to back connection and disconnect handler.
Add changes to free memory in these cases.
CRs-Fixed: 2047172
Change-Id: I5baf4555d956045cb65eedbc87daef3045732286
If Connect candidate has two or more APs in different band,
switch to DBS firstly. After associated 5G AP, will check and
try to switch to single MAC mode. But during DUT STA-AP key
negotiation, set hw mode cmd is refused to avoid EAPOL fail.
Fix: Delay N sec to check and set hw mode after associated, let
EAPOL handshake finish first.
Change-Id: I7d975fb56fedc30d66c21782607d148137e53e82
CRs-Fixed: 2372485
As part of ini convergence, enabled_11d and enabled_11h inis are
moved to converged framework but these inis are not removed from
legacy initialization path which is overwritting these values
to constant values and thus these inis are not taking effect.
Morever in the converged code also these inis are getting
initialized with default values instead of the values given
from ini file.
To address this issue, remove the legacy initialization of these
inis and in the converged ini path initialize these values with
the values configured in the ini files.
Change-id: I3d02c0d543fd561f1fd948b5c2850a509b1104e7
CRs-fixed: 2371528
