Add lanes number and infterface number config for lt9611uxc,
and add the code to control lt9611 power enable/disable using gpio.
Change-Id: I18e12791ac671ba1d14f0815a94068fd5ae1abf2
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
Enable SPS driver for Lahaina GKI version.
SPS (Smart Peripheral System) enables the support of
all BAMs in the system which provide DMA
functionality to various peripherals.
Change-Id: I5eb575d594bbd2c4858f224fcd40f1c2a04643f7
Signed-off-by: Ajay Prathi <aprathi@codeaurora.org>
Adding support for Full cone NAT and Address Restricted Cone
NAT by using the NATTYPE module.
Change-Id: Ib17f87757b86fdb88bbe25bab7d7193b0530f812
Git-commit: 4d71eea17c1eb4362f9d1ae13fce53815b6c9574
Git-repo: source.codeaurora.org/quic/le/kernel/msm/commit/?h=msm-3.4
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
When no touch panel, return proper value to exit driver probe.
Change-Id: I422f14ba6c942252346c46df5ccbc2f1f8be7731
Signed-off-by: Huadong Gao <huadgao@codeaurora.org>
Signed-off-by: Fei Mao <feim1@codeaurora.org>
Add callback function from drm panel, so touch driver can be
notified when panel is on or off.
Change-Id: Icd80ef60db3574b3eed3f9d2b8430923580baf69
Signed-off-by: Fei Mao <feim1@codeaurora.org>
This irq is only for touchscreen, not shared with others.
When meets errors, just ignore it, and don't throw again.
Change-Id: I926f645bd1e763792386aa74cedcf649d88b18a9
Signed-off-by: Fei Mao <feim1@codeaurora.org>
Initialize a local variable before referening it.
Change-Id: I469eb892b418fb1906ebf4c093ac28d249412cdd
Signed-off-by: George Shen <sqiao@codeaurora.org>
In order to catch the issue immediately, assert when power on retry
for PCIe resume reaches maximum.
Change-Id: Ie370e031e68721b531aae909f56bc45b9d9b59d8
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Print after successfully assert/de-assert WLAN_EN GPIO for
debug purpose.
Change-Id: I3094252cf2f14d7a5e438ea8a8983b9b30fc75ed
Signed-off-by: Yue Ma <yuem@codeaurora.org>
PCIe internal AUX clock frequency used to be either 1MHz or
19.2MHz. The devicetree entry was a boolean type to determine
which frequency to program in PCIe controller. Newer chipsets
may support other frequencies such as 16.6MHz. Update the
devicetree entry so that it accepts a decimal value for the
desired frequency to be programmed in PCIe controller.
Change-Id: Idd672bfb2908a15b9ee3e72654eb4d40a6d9b624
Signed-off-by: Tony Truong <truong@codeaurora.org>
This config enable the support for scsi generic driver.
Change-Id: Ib895134d3bd1635f612b9254900162160fbd67ea
Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
Add master and slave ID constants for all Qualcomm Technologies, Inc.
Yupik interconnect providers which consumers can use to set bandwidth
constraints and find paths in the NoC (Network-On-Chip) topology.
Change-Id: I0098d170786dacc3869485b86917b1a0a7491bfc
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add pcie logs to identify any possible latency in enabling
regulators, clks and icc as part of DRV resume.
Change-Id: I3cb72ce22773f0b6b52c9e704c9ec9a3a1de3d8c
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Change for fixed link speed.
Change-Id: If2584bd534b868171d53b0b880d65cc2eeb74410
Signed-off-by: Mohammed Siddiq <msiddiq@codeaurora.org>
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Use the property INPUT_CURRENT_LIMIT to suspend and un-suspend
USB and DC paths.
Change-Id: Id0636e7c792c63156597d5db4e9087bd5fdc262f
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
This enables the detection of VBUS going high or low on sdxlemur
platforms where USB peripheral uses VBUS_DET peripheral from PMX65.
Change-Id: I0a30944de02403ed7b777380c3e75708f033a5bc
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Add support for sdxlemur CPU clock driver for
controlling cpu clocks.
Change-Id: I02325424dabfe96f7357844cb69a368fc04afba9
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
Add support for and enable and disable ops for regmap_mux_div clk, also
support for safe source for regmap_mux_div clock to park the clk to safe
source while disabling and restore to active rate when clk is enabled.
Change-Id: Ida765ec1853c2bdd17b6fce3e8012e294f4324fe
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
Add support for "parallel" power supply which is not present in 5.4
kernel through IIO device and properties under it through IIO channels
under the IIO device.
Change-Id: I2f7fe8d96080ea927f1349a6742cd4e0a6ffc290
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
Signed-off-by: Ashish Chavan <ashichav@codeaurora.org>
