This module is used to tunnel multicast
packets received on an interface to WLAN
clients which have registered for these
packet streams. Mainly used to tunnel
EMBMS packets received on TMGI streams.
Change-Id: I996077342261ec2cb688e98319c6881d2dd7cce2
Acked-by: Raju Velpula <rvelpula@qti.qualcomm.com>
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
Enable SDHC FIFO explicitly by disabling the alternative FIFO.
The boot-loaders might use alternative FIFO instead of HC FIFO.
And the vendor specific register which has this setting won't get
reset with controller reset. So the FIFO setting done by the
bootloader would remain as it is unless its explicitly cleared.
Without clearing this setting, mmc driver can't make use of regular
FIFO mode.
Change-Id: Icd22f318d6f24e54afbcedacf026977b29de4e95
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
This is needed to get the current capabilities of vdd
regulator that is not managed by SDHCI driver.
Change-Id: I2a7f2981043185b51e268bf30c4ab9135991c6ee
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
System PM Violators reads should not be jumbled. Add a barrier to ensure
reads are sequential.
Change-Id: I68112e3ddff4c65a3b9e8cc1dc3a79ed392dc375
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
This change enables CONFIG_F2FS_CHECK_FS to check
FS consistency at runtime and catch errors.
Change-Id: I554d2e7d3155fba3cbcd2f2c0a14b6cc8b36abff
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Expand match criteria so that multiple OF nodes with
the same BDF will match with the correct PCI device.
OF node will have an optional compatible entry with
device and vendor ID, which will be matched to a PCI
device and vendor ID.
Change-Id: I6e654d5dbf55a05b4e1b6a60d5d87addc2cb14b9
Signed-off-by: Tony Truong <truong@codeaurora.org>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Initialize rc just for sanity so that it is not used uninitialized in
the return path.
Fixes: 568fc7ac9b ("leds: qti-flash: Handle all-enabled led mask separately")
Change-Id: I77caac87781b7a2ad2de0ecb13c5b3cd9ca3707b
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
commit 59ff8848b2 ("usb: gadget: qdss: Use usb_ep_autoconfig()
instead of ss() variant") modified f_qdss to use the simple
usb_ep_autoconfig() helper, however this function has a caveat
that the passed in descriptor's wMaxPacketSize field gets updated
to be a maximum to 64 bytes. Hence, this function should not be
called with descriptors intended for high- or Superspeed usage
since they can support up to 512 or 1024 bytes for bulk endpoints.
Instead, call usb_ep_autoconfig() by passing in the FS descriptors,
and use the resulting bEndpointAddress assignment to update the
corresponding HS and SS descriptors.
Change-Id: I0b177d5d1075bc3e996f09a2db4699952cf0886d
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Added flag to differentiate between gsi db address or
ddr address.
Change-Id: I106e993a5e6a86b8d36009d73fa888a8167922c0
Signed-off-by: Armaan Siddiqui <asiddiqu@codeaurora.org>
In some usecases AB votes may not be needed but governor
cannot suppress the AB measured on HW.
Provide use_ab tunable for userspace to drop AB vote.
Change-Id: Ib7734e06fa00f86eb536b63526c16212012b614d
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
With kmem event we were missing number of allocs and frees due
to high frequency of event occurrence. So added debugfs interface
to capture the slub alloc owners from slab list and it prints data
using sequential file interface when we execute the
"cat /sys/kernel/debug/slab/alloc_trace" command.
Change-Id: I72eb5a21cc20a046f04d88d4dfbafa5cf378805a
Signed-off-by: Faiyaz Mohammed <faiyazm@codeaurora.org>
Add support to expose msm_skin_therm sensor via QMI.
Change-Id: I7837c924456fc36867a9d6633c58d6c1e0aacda1
Signed-off-by: Gopala Krishna Nuthaki <gnuthaki@codeaurora.org>
