Add support for managing the PM8008I and PM8008J chips via I2C.
This ensures that consumers are able to modify the physical state
of these PMIC regulators.
Change-Id: I390c8d41f950148e4532e614f0ddcf98effebb22
Add an SPMI PMIC arbiter device to communicate with PMICs
attached to the SPMI bus.
Add an SPMI debug bus device and associated child devices.
Add PMIC Glink device and their client devices.
Add top level SPMI slave devices for PM7325 and PM7325B PMICs.
Also add some of the peripheral devices within the SPMI
slave devices.
Change-Id: I9ffaceb1a41560ab35e1d54ed53a345aa7872a5b
PCIe end point device driver and Modem host interface driver
is used to support mobile broadband interface module.
Change-Id: I3237dfcc56098df9efda9b5c59976deaf829a521
Use separate thermal zone node names for same modem pa sensors with
different thermal governors. Otherwise second thermal zone node will
override first one.
Change-Id: I7e2d76eb13f9466b451639ab9cea8e8b43185c67
Add rpmh-regulator device nodes for the PMIC PM7325, PM8350C,
and PMR735A regulators. This ensures that consumers are able to
modify the physical state of these PMIC regulators.
Change-Id: I30719e56559e1f2f3cf31decb15ef168f6fe5ca6
Locations of PMU cache and log buffer are changed on RIMPS side.
Update them accordingly for driver.
Change-Id: If396306e148ff670eb10c9849f3f367742d42fe7
Add support to disable pulse skipping for customers that require it.
When the property is added, IBB regulator is forced into CCM mode
whenever it gets enabled.
Change-Id: I46dbe4f411b0f4022105188349d7a6f4d1412254
Make sdhc aliases start from 0 instead of to create
block devices starting from mmcblk0 for emmc and mmcblk1
for sdcard.
Change-Id: I3cd709230a50afec0c9f3a8b481f458d9a15765b
This change reverts commit be1f95bbcd.
Disabling VBUS_DET causes adb enumeration to fail as usb extcon node
need to be assigned an alternate device, such as pm7250b_pdphy. However,
to get this properly working, we need PMIC HW initialization to be done
in the bootloader stage. Hence reverting this until that is ready.
Change-Id: Ie8efaab512cc74a4d61f88021c6d87ef001d5aae
This flag indicates to the driver that SRAM memory region
has not to be remapped as write combining.
Change-Id: I05529a30066d373ce1fad9a88a6f18e9e4467b64
Update the description of "reg" property to add the PON_PBS base
address along with PON_HLOS base address. Also add "reg-names"
property.
Change-Id: I257950babd4b68f3ab933679bd94936813531e25
Add bcm voter devices that live under RSC devices
to allow interconnect providers to target their
votes for meeting bandwidth constraints. Also update
the interconnect nodes so that real provider drivers
get probed.
Change-Id: I2359c9b2b789891045d2d70f83d5b19ebc529646
Update interconnect device bindings. These devices can be
used to describe any RPMH and NoC based interconnect devices.
Change-Id: I4bca29bda915717690efd24bf80ce1e3bd3b4154
Update the BCL rule in SHIMA to include CDSP mitigation for
all three violations.
Update PM8350 alarm rule in SHIMA to have cpufreq as mitigation
devcie instead of cpu-isolate cooling device for silver and gold
cores.
Update silver core mitigation to ensure minimum operating
performance.
Change-Id: I5ba29ee1e606cf9104e4ab4745606c473b9ea497
Update quiet-therm sensor skin thermal zone mitigation config
for SHIMA based on latest recommendation.
Add modem lte sub6 skin sensor based thermal zone mitigation
config for SHIMA on latest recomondation.
Change-Id: I1305de5650dae6d234fc4338b0dee9665a2c844d
