This change bring PPI driver from msm-4.14 to camera-kernel.lnx.4.0.
msm: camera: isp: Added PPI driver functionality
msm: camera: ppi: Change PPI reset sequence
msm: camera: isp: Do not enable the ppi hw twice.
CRs-Fixed: 2682747
Change-Id: I7cde3aeed1dbcef95f25441c2482f5bc8c1534de
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
In case of long exposure shots, watchdog timer needs
to be modified for init exposure seeting also to avoid trigger.
CRs-Fixed: 2706105
Change-Id: Ife8b3ec32103aff71d281e11b68e0d48f4ef79e1
Signed-off-by: Chandan Kumar Jha <cjha@codeaurora.org>
In stop immediate currently only the CSID path is reset, the
RX is still capable of listening to IRQs. Unmask this in stop
and enable them again at start.
CRs-Fixed: 2698391
Change-Id: Iacdc9d241192e976b61728314a83d445534234c6
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
Add provision in CRM link control to accept any long exposure
timeout value so that CRM can modify it's internal WD timer
during link activate.
CRs-Fixed: 2706105
Change-Id: Icedeeef32dcc5c881277f28dc2c0fbb40fa1e7f1
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Add cpas interface to allow clients or usecase to select
different QoS settings based on requirement. Selection
API must be called before camera hw powers up.
CRs-Fixed: 2687917
Change-Id: Ie524fcd6131d7c42288d0d734a7cdf6b9fcb92b7
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Fixes exit call flow as a part of rmmod.
CRs-Fixed: 2675526
Change-Id: I47111a737cb06d9bb3d0a417a471c5c9fb545999
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Enable camera as dlkm for all flavor of compilation.
CRs-Fixed: 2701988
Change-Id: Ic1bdd64cd612636613d3b1419c7bebc136023948
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
IFE Query cap currently gives only IFE Full Information. Update the
code to return IFE Full, IFE lite, full IFE-CSID and IFE-CSID lite
information in return of the IFE Query cap command.
CRs-Fixed: 2647995
Change-Id: I84cf5b766ce191aacad4a1de478c6eebafe917b3
Signed-off-by: Jigar Agrawal <jigar@codeaurora.org>
Add support for debugging constraint violations within
the VFE Bus.
CRs-Fixed: 2545323
Change-Id: Ib8805b6b61284ac869218cab4d6689ded23bf98a
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Add support to handle SW sync & ZSLSnapshot. Add substate machine
and mechanism to handle the lifecycle of requests based on irqs
accordingly.
CRs-Fixed: 2524308
Change-Id: Ie5ba97d4ae1b38f4b44c2d3935d2882df59fcac6
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
If there is a valid request CRM will apply that request to the
custom device, in scenerios during which there is no setting to
be applied to a custom device at a given epoch CRM needs to invoke
the custom device to program default settings for the next frame.
CRs-Fixed: 2524308
Change-Id: I4701c602ab68b9f64266f03a9b200d15a808165e
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
msm: camera: tfe: Fix variable initialization issues
msm: camera: isp: Dual tfe event check with proper hw idx
msm: camera: smmu: Add support for non-contiguous mermory region
msm: camera: smmu: Use iommu best match algo for camera
msm: camera: ope: Optimize allocation of IO configuration
msm: camera: ope: Fix for KW Issues
msm: camera: ope: Add support for stripe level height configuration
msm: camera: tfe: Enable the delay line clc
msm: camera: ope: Fix false alarm for OPE HW timeout
msm: camera: tfe: Support register dump per request
msm: camera: ope: Increase max number of stripes
msm: camera: ope: Change packer and unpacker format in case NV12
msm: camera: tfe: Add packet code get command for tfe
msm: camera: ope: Trigger recovery in case of violation on write bus
msm: camera: ope: Protect ope hw reset with mutex
msm: camera: ope: Add a check for valid request in cdm callback
msm: camera: ope: Remove the BW & clock vote in release context
msm: camera: ope: Reduce OPE BUS memory
msm: camera: ope: Fix return value for ope acquire
msm: camera: ope: Fix false alarm for OPE request timeout
msm: camera: ope: Avoid deadlock during recovery after HW hang
msm: camera: tfe: tfe debug enhancement
msm: camera: cdm: Fix irq_data value in case of inline irq
msm: camera: flash: Switch off flash on provider crash
msm: camera: ope: Initialize ope hw mutex structure
msm: camera: cdm: Flush all available FIFOs during reset
msm: camera: cpas: Add mandatory bw option for axi ports clocks
msm: camera: ope: Use vzalloc to allocate the write bus ctx structure
msm: camera: ope: Fix handling of init hw failure
msm: camera: tfe: Enable per frame register dump for rdi only context
msm: camera: cdm: Protect cdm core status bits with mutex
msm: camera: cdm: correct the error check in cmd submit irq
msm: camera: ope: Fix unclock access during HW reset
msm: camera: ope: Program frame level settings after idle event
msm: camera: ope: Delay releasing of resources for last context
msm: camera: isp: Increase default SOF freeze timeout
msm: camera: smmu: Add map and unmap monitor
msm: camera: isp: Add trace events across ISP
msm: camera: smmu: Profile time taken for map, unmap
msm: camera: ope: Start context timer on receiving new request
msm: camera: tfe: Reduce stack size during set axi bw
msm: camera: cdm: Check for HW state before dumping registers
msm: camera: ope: Reduce stack footprint during acquire
msm: camera: tfe: Disable clock if tfe2 is not supported
msm: camera: cdm: Avoid cdm pause incase of BL submit
msm: camera: tfe: Optimize CSID IRQ logging
msm: camera: ope: Move request id validity check outside of lock
msm: camera: tfe: Correct the tfe hw manager dump logic
msm: camera: ope: Synchronize flush and submit BLs
msm: camera: cdm: Protect cdm reset status
msm: camera: cdm: Handle cdm deinit sequence properly
msm: camera: tfe: Reduce reset timeout to 100ms
msm: camera: ope: Fix hang detection
msm: camera: ope: Make non-fatal logs as debug and info logs
msm: camera: tfe: set overflow pending bit to zero after HW reset
msm: camera: ope: Do not disable CDM during error handling
msm: camera: ope: Add support for OPE Replay
msm: camera: ope: Stop OPE in case of init failure
msm: camera: ope: Synchronize process cmd and flush request
msm: camera: cdm: Fix CDM IRQ handling
msm: camera: tfe: LDAR dump for TFE
msm: camera: ope: Fix the length check for debug buffer
msm: camera: cdm: Fix CDM reset logic
msm: camera: ope: Dump debug registers in case of HW hang
msm: camera: tfe: Support the RDI bus port for line based mode
msm: camera: cdm: Handle out of order reset done events
msm: camera: ope: Consider other contexts during timeout
msm: camera: ope: Put GenIRQ in last stripe BL
msm: camera: tfe: Process the rdi interrupts for rdi only resource
msm: camera: jpeg: Check the HW state before accessing register
msm: camera: csiphy: Update csiphy power-up sequence for lito v2
msm: camera: cdm: Secure freeing of request lists using locks
msm: camera: cpas: Add support for Scuba camnoc
msm: camera: csiphy: Clear secure phy flags on release
msm: camera: tfe: validate the tfe bw num paths
msm: camera: ope: Reorder the reset order in ope acquire
msm: camera: ope: Dump debug registers in case of reset failure
msm: camera: ope: Add logic to detect hang in CDM
msm: camera: isp: Increase max count of cfg to support more init packets
msm: camera: core: Fix cpas axi clk rate overflow.
CRs-Fixed: 2668666
Change-Id: I882ca4bd117bebc7d1c62bc82299d69d7b5c9388
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
When there is a delay in offline ife workqueue scheduling
it is possible that two requests are applied back to back.
This could lead to requests lost. Therefore we must check
for epoch flag before applying any request.
CRs-Fixed: 2686281
Change-Id: I323710a61301d79e78db22dc1f66a6a0f141389a
Signed-off-by: Venkat Chinta <vchinta@codeaurora.org>
num_cfg_new temp variable should be assigned the value of
num_hw_entries from new isp request instead of old isp request.
CRs-Fixed: 2673657
Change-Id: Ie4d29949e2c992560b6635f7e0b5db88c2dafd48
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
TFE hardware compilation needs to be enable with correct flag.
Correct tfe compilation flag along with necessary base Makefile
change. Also, remove unnecessary makefiles from tfe hw module.
CRs-Fixed: 2675526
Change-Id: Ibd8b8f5acc4f843bf373e14a9c8e3bc41cb58839
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
If IFE is connected to custom HW in the pipeline, make the cdm
submit a blocking call to ensure settings are programmed to IFE
on time.
CRs-Fixed: 2687917
Change-Id: Ib7a3c44f3f99a30805c1cbf49669dabc27d20431
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
There is high chances, when camera server crash flash may not have
flash off request scheduled with CRM. In case of torch on, followed
by shutdown sequence, if flash off request is not scheduled, flash
remains turned on. This change adds flash off operation, in case
of shutdown.
CRs-Fixed: 2691916
Change-Id: I472f2b204b93d0cdc3d8a1f14fff29ab479e4588
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Aligns the uapi header types and includes to be in-line with upstream
kernel formatting. The errors are given by enabling the UAPI_HEADER_TEST
config, which is now enabled in GKI builds.
CRs-Fixed: 2679250
Change-Id: I195fb2aab9251043fc63d79dd31f2db53b1228f5
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Some driver probes do not have a real dependency on other
driver probes. Still, they are blocked from creating subdev
nodes if that driver's probe comes after all nodes were created
in master component bind. Add subdev node at the time of subdev
register itself, to lift this requirement.
CRs-Fixed: 2686729
Change-Id: I3505071a79296dd7d5665b13d533a9a022aa1a85
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Update the master status data type, as it expects the negative value
and do the operation accordingly. Also, correct the return code and
update the validation check.
CRs-Fixed: 2686717
Change-Id: I8ecae74de2995a08e532a7f0ef078d48d45a928e
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
