Update the STA+CLI+SAP cocurrency in 2x2 PCL tables according
to STA+GO+SAP concurrency PCL.
Change-Id: I292881f463613b5b38ccfff42bf1509396bdb472
CRs-Fixed: 2749425
In Case device is in suspending, if there is a disconnection,
disconneciton may fail as wmi cmd is not able to send to fw.
Add synchronization resume before disconnection as a protection.
Change-Id: I250d3a86183a61629e9369f49209c5a058a9a9a1
CRs-Fixed: 2746816
Current implementation of external mode requires supplicant to
send tdls peer mac address. On matching of stats tdls implict
link procedure is triggered for configured peer.
Fix, to allow both configured peer and other peer that supports
tdls to establish the tdls link.
Change-Id: If7cb10986126db28979293653b1bc2a92c3f72eb
CRs-Fixed: 2750191
In WAPI conenction the check for WAPI authmode is missing.
And thus AKM filles in open mode leading to not seinding the WAPI
IE in assoc req and thus Assoc reject.
Fix by properly handling the WAPI case.
Change-Id: Ic7b7b7e5ffce46e30ade20395406287e1b5a5fce
CRs-Fixed: 2744415
Req has been freed in csr_roam_send_rso_cmd when post msg failed.
Avoid use after free and double free in csr_post_rso_stop.
Change-Id: I86e6360eed1a57d0bac218f799393fff0e2a4a58
CRs-Fixed: 2748399
Since tdls_implicit_enable will be called in different scenarios, and
there is error level output if repeated start same timer. So check
the state before starting tdls timer.
Change-Id: Id023affa016f337286dad539298a9bbc15381091
CRs-Fixed: 2747370
Host sends the WLAN_MSG_WLAN_STATUS_IND to WiFi Location Service(WLS) via
cnss daemon which includes supported channels. WLS service is yet not 6GHz
capable. Hence to limit the 2.4GHz/5GHz channels only in
WLAN_MSG_WLAN_STATUS_IND introduce new INI "wls_6ghz_capable".
Change-Id: I77b284d2025601fec72aa35d430f18865f15f247
CRs-Fixed: 2748489
Send HT ie's to FW in AUTO, 11N, 11AC and 11AX modes.
Send VHT ie's to FW in AUTO, 11C, and 11AX modes.
Send HE ie's to FW in AUTO and 11AX modes.
Change-Id: I0ed7b0108593ee20540d4e5da2c1461a4a15e8fc
CRs-Fixed: 2748761
Enable packetdump_timer related operations only when
following conditions are met:
1. WLAN_LOGGING_SOCK_SVC_ENABLE is defined.
2. FEATURE_PKTLOG is defined.
3. REMOVE_PKT_LOG is not defined.
CRs-Fixed: 2747430
Change-Id: I47575ff184345884c47fe91922236bb4a3db420b
Initialize chan_id with 0 in struct wifi_pos_ch_info since it
is obsoleted by channel frequency.
Change-Id: I8228ffc0cce33dcaaa73c29cca5760ff2dbfd8fd
CRs-Fixed: 2749395
In WMI_TDLS_SET_OFFCHAN_MODE_CMDID the offchannel freq is set to invalid
value due to uninitialized local tdls_channel_switch_params type variable
resulting in fw reading incorrect non zero offchanel freq.
Fix, to zero initialize the local tdls_channel_switch_params variable.
Change-Id: Ia7d6daac098a179a22676620875a2b0d6488a8ad
CRs-Fixed: 2739267
If wma_send_msg_high_priority failed to send msg, msg body is freed,
can't access later.
Move wma_delete_sta_req_sta_mode and log to avoid use after free.
Duplicate MLME_IS_ROAM_SYNCH_IN_PROGRESS is called in 3 functions in
same stack, clean up it.
Change-Id: I28b7cc9f12902aefa37bf1345c94ec6f0b581297
CRs-Fixed: 2748407
As per requirement, send a value of an INI "roam_score_delta" to FW
through WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID.
Change-Id: I9a2087f83c2eb95338d440dc901bd8aa246f7e5f
CRs-Fixed: 2740552
Since sme_ps_enable_auto_ps_timer will be called in
different scenarios, and there is error level output
if trying to start it when it's already started.
To avoid the useless error log, check the state
before starting this timer.
CRs-Fixed: 2747427
Change-Id: If119da266a991b6b5990ad3077e41c2bba11a798
On some cases, dp_rx_thread can not handle nbufs in time,
then a large number of packets are pending in
rx_thread->nbuf_queue, which run out of system memory at
last and failed to malloc new buffers for refill buffer ring,
fw crash is encountered. To avoid this, drop RX packets when
the pending number becomes large.
Change-Id: Ie4e001dc584821cf68253aa3a15a5fd72394c736
CRs-Fixed: 2737181
CLD driver specific time sync feature is no longer used since
core BSP provides more accurate time sync over QMI and hence
disable CLD driver specific time sync feature to avoid periodic
wake ups.
Change-Id: Ic2790e7cdb6cf56f874fb56cda246777bc34d2e3
CRs-Fixed: 2715021
Enable NS offload only when IPv6 address is added. No need to
call it when deleting IPv6 address and ifdown.
Change-Id: I5eb282d1deb1bc101871fa0952ac37796eb16db0
CRs-Fixed: 2747574
Print BTM BSS termination timeout value and BTM MBO assoc
retry timeout value coming from FW through
wmi_roam_trigger_reason_tlv_param tlv.
Print Blacklist reason, Source of adding AP to BL, timestamp
which indicates the time when AP added to blacklist and
Original timeout value in milliseconds when AP added to BL
coming from FW through wmi_roam_ap_info_tlv_param.
Change-Id: Iea5b8c136f83841d679b9ad06721bb0c9349b46a
CRs-Fixed: 2744250
Currently driver sets the NOL state of the channels to false
on every regulatory updated, which indicates the channel is
not in NOL. Which may lead to some issues where the channel
is actually in NOL but host treats it as non-NOL channel.
Ideally NOL list should be maintained throughout the driver
lifetime and across the regulatory changes.
To address this issue add a logic to not update the NOL state
of the channels whenever the regulatory update is received.
CRs-Fixed: 2744916
Change-Id: If96b22ab29a60a2aa752bbf01aaae46fc37362eb
Currently only STA and SAP support PMKSA cache, and return
EOPNOTSUPP for other modes.
Change-Id: Ic8969ffd58815c4f3e2e5e286521421c38eb7f56
CRs-Fixed: 2747485
vdev mlme chan info isn't updated after LFR3 roaming, so
wlan_hdd_cfg80211_get_channel get old center_freq1 from vdev mlme,
center_freq1 isn't same as center_freq for 20M channel,
cfg80211_chandef_valid return false.
Change-Id: I4037f80627d207bdf9ba60cd9c3b7be82bad81e8
CRs-Fixed: 2746246
Enable PM QoS support for 5.x kernel by adopting dev PM QoS APIs to
request device structures for CPUs and then requesting QoS on those CPU
devices.
Change-Id: I9c7565b44a72145e11178fe360f413ff578142cf
CRs-Fixed: 2734025
For 6ghz AP with open security,the STA join req was not going through
due to security check added from CR2715086.
Fix is to move the rmf enabled check inside lim_is_6g_allowed_sec().
Change-Id: I32fb0de34fdf05063dee5f28aac164b1dfcaea5e
CRs-Fixed: 2746745
Currently mac trace msg rx function is passing module
id as a second argument to mac trace function instead of
message id.
As mac trace expects message id as an argument, pass message
id to the mac trace function as message id.
CRs-Fixed: 2719737
Change-Id: I9fa1611d6095975241a01325b798c24ea654df3e
