distinguish sensor version by read sensor version address,
and apply extra setting when sensor version is 0x02.
Change-Id: I9d0fc6eee906e345d4ee3a67ed26c8ed3517f8e7
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2282942
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: <huqian4@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
details:
front camera ov32c4c and ov32b40 compatible
front camera ov32c4c bring up on 8350 baseline
Change-Id: Ibbab62bdfb9784bc302222d7794137d3ccfb2d5b
Signed-off-by: chenlj26 <chenlj26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2246392
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
-For ov32c4c,must write reg 0x1001=0x4 to switch iic addr to 0x20
before any iic operation.
-add preInitSetting,it will be wroten into sensor before init.
-add IICAddrSwitch,it will be wroten into sensor before probe.
Change-Id: I0d0d3959371355843fc4e384042e4ad44a42243d
Signed-off-by: chenlj26 <chenlj26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2218769
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
detalis:
switch the cci device to read the flash ID
Change-Id: Idf29474ca4946afb122339eeefe01b7dacfc0485
Signed-off-by: liuzy55 <liuzy55@motorola.com>
Reviewed-on: https://gerrit.mot.com/2191857
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Long Cheng <chengl1@motorola.com>
Tested-by: Jira Key
Reviewed-by: XiaoFeng Wang <wangxf32@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
Read ois status and mode in vsync thread.
If ois is not enabled and not in move mode, skip vsync handle.
Change-Id: I2ddbf839b089da75550aef03b63fe136cbd4bc43
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2175243
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: XiaoFeng Wang <wangxf32@lenovo.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
Adding back: msm: camera: ife: Add ife num outport bound checks. QC helped us to
investigate the stability issue on Berlin/BerlinNA caused by the reverted change.
ISP output number was being set incorectly on camx for Astro165.
This reverts commit f3bb3c280110fb2961afac73d214f1411e0cb839
Change-Id: I3e9aac8ae3bf81ccb6ffa7434a8db609c3c76525
Reviewed-on: https://gerrit.mot.com/2165129
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Gilberto Gambugge Neto <gambugge@motorola.com>
Reviewed-by: Monica Mabuchi <monicam@motorola.com>
Submit-Approved: Jira Key
Qcom cci read function will use kzalloc()/kfree() to alloc temp
buf for cci read data.
As ois vsync irq thread use cci read very frequently,
so don't alloc/free temp buf when cci read.
Change-Id: I67a912d6ef5ba3f1820d5b571ff5bd55f8c1f561
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2155763
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: XiaoFeng Wang <wangxf32@lenovo.com>
Reviewed-by: <liuzy55@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
sm6375 cci only support read 0xE bytes each time.
if we read 0xE bytes, it will access invalid memory.
so change to read 0xC bytes each time.
Change-Id: Id59620df4e5cb16bfb31396fdc6fc65c60449600
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2155699
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: XiaoFeng Wang <wangxf32@lenovo.com>
Reviewed-by: <liuzy55@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
when vsync arrived, ois data has updated.
read it in the vsync thread.
Change-Id: I1bde6a76cf85d051cdd72bdff7a6df91364c906c
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2143947
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: XiaoFeng Wang <wangxf32@lenovo.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
-On xpeng,rear main camera s5khm2 will have two type(SP03&SD03), we need
set correct DVDD voltage for each sensor per module pin_20 value.
-Use gpio_48 to read module pin_20
-1 means hm2SP03,DVDD is 1.1v. 0 means hm2SD03,DVDD is 1.05v.
Change-Id: I119d9c17795867c84b21ff0e8afa6b69f0579778
Signed-off-by: wangshuo18 <wangshuo18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1960645
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Ji Zhao <zhaoji1@lenovo.com>
Reviewed-by: Bolei Shang <shangbl1@lenovo.com>
Reviewed-by: Zhuoran Xu <xuzr3@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
-when use quick-draw to open camera,vibrator will be trigger first,and
mot_acatuator will power on and pull lens to specify DAC position,
DAC is 900 on berlin.And then camera will take control of
actuator and init actuator,this will cause lens fall back from a
high position to a low position,it will cause a obvious hit noise.
-This change will move lens back to low position step-by-step,befor
camera take control of actuator.
-It will cause about 38ms delay,will affect focus lock performance of
opening tele camera after vibration.
Change-Id: Icded21d8a863af79abcb9e9f98559757158d75ba
Signed-off-by: wangshuo18 <wangshuo18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1989392
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
-Sometimes system will suspend during the delaywork.
so add wakelock to ensure system is awake.
-port from 1984717
Change-Id: Ie081d6d3e6642c7d6f77b2a1f3eb9a3d82c9f69c
Signed-off-by: wangshuo18 <wangshuo18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1985991
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhuoran Xu <xuzr3@motorola.com>
Reviewed-by: Bolei Shang <shangbl1@lenovo.com>
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Yongqin Wan <wanyq1@motorola.com>
Reviewed-by: Zhilong Wang <wangzl30@motorola.com>
Reviewed-by: Quanlin Zhu <zhuql3@motorola.com>
Submit-Approved: Jira Key
1.Reduces the number and length of launch_lens,to reduce delay of vibrating.
-Optimize delay of vibrating，but it still have about 110ms delay.
2.Do not init actuator when camera APP is holding actuator.
-Fix the wide camera image shaking issue when the phone was vibrating
Change-Id: I7ee1c1a063cb6428d36544b6958e1b2f19f518ed
Signed-off-by: wangshuo18 <wangshuo18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1976594
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Liu <liuwang2@lenovo.com>
Reviewed-by: Darong Huang <huangdra@motorola.com>
Reviewed-by: Jian Zhang <zhangjo@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Qiang Guo <guoq8@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
