As the size of the lahaina-pinctrl.dtsi file is huge, it's
possible that the config nodes might be placed incorrectly
under &soc{..}, instead of &tlmm{..} due to human errors.
Hence, rearrange the node such that the lahaina-pinctrl.dtsi
file itself begin with the &tlmm block to minimize these errors.
Change-Id: I537e6cc980d58470949fc99dcaa4e65b0ff75663
This change adds GPIO configuration for USB VBUS/ID detection and
enabling 5v vbus in host mode. It adds extcon_usb2 device node for
using this configuration through USB extcon gpio driver for
notifying vbus/ID status on connecting USB cable.
Change-Id: I54727cc9112e74b4c8829442fc6e727bbd20beab
Add flash/torch LED devices on PM8350C that are needed to support
camera flash on Lahaina platforms. Note that this changes doesn't
add HW strobe configuration.
Change-Id: Id8b3f912551b9e895fbd1f96a7200e1fd89d7767
Enabling USB secondary port results into multiple crashes due to
other depedency is not into place. Hence for temporary disable
USB secondary port on Lahaina.
Change-Id: I9986f95389d556612347fbbd9fe9425a3f3d6b5a
- S12B can not supply power more than 1.25V so restricting
it to permittable voltage range.
- Enable UART for bluetooth.
Change-Id: I83d3a0a5bffdc9a66b921d23a69a78a59c4a2fa7
This change will enable page recycle on the WAN Rx paths and
cleanup entries that are not needed anymore.
Change-Id: I82fdfdd2684afeffd8ca07433f39fb59b0e5c92d
Update the min and max voltage limits for Lahaina RPMh regulator
devices so that they match the limits enforced by the boot
loader.
The S12B max voltage increase in particular is required to
support WLAN use cases.
Change-Id: Iba15cf13f4dddf851407f19700f2d6b626ca22b7
Restrict default CMA region below 0xE0000000 so that allocations
from this region don't overlap with CLADE address range.
Change-Id: I462a70900b821ba1ff0fcb5ad020e79f37f6efb0
The change includes SDE display platform specific file in the
corresponding platform device tree files for Lahaina target.
Change-Id: I2154926a18761344e9acd2b92c079424bf41fe24
This change adds a proxy vote for MDSS GDSC, refgen and
supplies to support amoled displays. This is needed
for continuous splash screen usecases.
Change-Id: Id59ee3f639a78180ac4dd1ccc809fa8d60c2f28e
Add secondary VM devicetree file for lahaina chipset. This file
adds the basic nodes like CPU, intc, hypervisor that are required
for the VM.
Change-Id: Ice6fb0b6160fa27853fac6076f3d965c3463528e
