In scenario, when ROAM HO failure is piggybacked on WOW wake up,
the blm reject AP addition fails as mutex can't be acquired in
interrupt context. With this change, the reject bssid blm
addition will happen after changing context to scheduler thread.
Change-Id: I685501b7ea48e4461922a7a50fb39c52d4d607f3
CRs-Fixed: 2880712
For sap mode, beacon frame has country IE, but country info
fields have all bands channels information. Using band based
chanel list to populate country IE information.
Change-Id: I0be084b9b539d453e5386c6a25dd2d9daa5de21c
CRs-Fixed: 2819683
Replace request_firmware by firmware_request_nowarn to avoid warning
message when the file is not found and sysfs fallback mechanism is
enabled if direct filesystem lookup fails.
Change-Id: Ia182bcf990144ac12434253144e772f6a0780cfe
CRs-Fixed: 2912035
Since stop_modules can happen in parallel due to idle shutdown,
add additional checks whether the IPA deinit happened already
or in-progress, in ipa_register_ready_cb.
Change-Id: Icc1973be3e90d4231addcebab55e621d19c5789c
CRs-Fixed: 2903419
Add a CDS API to check if the driver state is module stop and
also register for QDF wrapper for the same.
Change-Id: I99fbdda593ca229ef8db956c609735ae6509d511
CRs-Fixed: 2912747
When the SRNG IRQs are disabled during suspend, it is
required to disable the interrupts and wait for interrupts
that are pending to complete. Adding a pld/pfrm API to disable
irq synchronously.
CRs-Fixed: 2908685
Change-Id: Ia1f17d54cbe08e8dc101c0ecc2ddee9275712659
adapter->dev is used for get ref, issue happens
1 adapter is used to dev hold in thread_1
2 adapter is removed in thread_2 for interface
delete, and adapter->dev is set to NULL in
hdd_uninit.
3 thread_1 use adapter->dev for dev_put, then
adapter->dev is invalid here.
As adapter->dev will be invalid only after dev_put,
so not set null adapter->dev in hdd_uninit in case
dev_put need it.
Change-Id: Id764a6ef15ef8fc4eae24a3f2428d8cec55716aa
CRs-Fixed: 2912285
Target side STA PS module will only stop when WMI_VDEV_STOP
received, and QoS-null frame is possible to be sent in
the window from DEAUTH TX to WMI_VDEV_STOP.
Disable STA power save before disconnecting process,
to avoid QoS-null in such window.
Change-Id: I3f33fc7ab81f70c22218cd3cc5a4ba934c6bccae
Currently, host exits the regulatory update critical section as soon
as hdd_regulatory_dyn_cbk finishes. However, there is some work that
is scheduled to send the updated scan channel list to FW, which needs
to go inside the critical section as well. Move the logic to exit the
critical section after host sends the channel list.
Change-Id: I01f82232bdd4d4b3403f46dee5278fc74d50b05a
CRs-fixed: 2905643
Currently,there is an issue in hdd_adapter_iterator(), as it
is iterate till (n-1)th adapter. Due to this, in STA+STA+P2P
scenario, driver allows wlan0 scan when P2P connection in
progress as hdd_is_connection_in_progress() only check for
STA mode and miss the P2P mode.
Iterate till nth adapter as a fix.
Change-Id: Ia6e49b3a8372634756e89032ee9d599583160479
CRs-Fixed: 2907307
Don't allow twt statistics or clear statistics command
if twt statistics or clear statistics is in_progress.
As a Fix, reject the new twt statistic or clear statistic
command till existing twt statistic or clear statistic
command completion.
Change-Id: I710a81ae3409f181689b2e4c9e9d4e583d4aadab
CRs-Fixed: 2870592
Currently, TWT setup is allowed after roaming even if
TWT notify from firmware is not received.
Block the TWT setup till notify event is received
from firmware.
Change-Id: Ia6ff8fe9e05f32ddf6dbdd608d9090b612237f26
CRs-Fixed: 2870610
Any operation on the reject ap list should be protected
by the mutex lock, otherwise, race condition may happen
and result in list corruption.
Change-Id: Iefe0594a62563d800e85f8f6ebd747ab46c19fcf
CRs-Fixed: 2901576
Set system state in hif ctx to suspend or resume on
system suspend and resume respectively.
Change-Id: If1904a4fe5c861deed1b35071be10cb8cc8d6407
CRs-Fixed: 2899520
In Extended capabilities sent in assoc request, TWT capabilities
are included so 10 octets are present, but in set ie command,
only 9 octets are included.
Also the Beamformee STS <= 80Mhz capability is not populated
per band based on firmware advertised capability in the
set per band ie command, so there is mismatch in this field in
initial association and roaming.
Populate the missing bytes in IE sent via set ie command to
firmware, also update the beamformee sts capability per band.
Change-Id: I2d191cedface935970ed4f974c09c3b4c5acd477
CRs-Fixed: 2891017
TDLS teardown happens in high throughput
scenario as rx pkt count increment API
"tdls_update_rx_pkt_cnt" is not called
if hdd_is_current_high_throughput API
returns TRUE. The reason for this is due
to high cpu cycles consumed by
tdls_update_rx_pkt_cnt API.
As part of fix optimize tdls_update_rx_pkt_cnt,
tdls_update_tx_pkt_cnt API's for high
throughput scenario. In high throughput
scenario mostly the use-case is to increment
the pkt counter so move that logic to
the top of the API's.
Change-Id: I4eb0da3571c45b5ee91e051e251158af15f73973
CRs-Fixed: 2888746
Currently, P2P mode is not supported in 6GHz mode
Add P2P mode in policy_mgr_is_6ghz_conc_mode_supported
API to support P2P mode in 6GHz mode as fix this.
Change-Id: I2e160641c1784dbbd592b237da6b38929f33abbe
CRs-Fixed: 2896291
Update reject ap type to string from int value while
dumping blacklisted bssid for debugging purpose.
Change-Id: I2a12949e9e46f6fad32cc54ac975dfbfbdba88ab
CRs-Fixed: 2857907
Add new ini "enable_twt_24ghz" to enable/disable host triggered
TWT in 2.4Ghz connection. Check this ini value in TWT get
capability. The userspace will query the self capability before
triggering the host TWT.
Change-Id: I3544de89f438fc526f8a2554c6aeebcd25d6c415
CRs-Fixed: 2904775
When TDLS connection is made in 160 MHZ
for 11ax staions, the MCS rates for the
same aren't updated correctly.
Also, MCS rate can change in case the
connection between both stations is made
with AP operating in NSS 1x1, as there is
a check in lim_populate_he_mcs_set which
will disable MCS rates corresponding to
nss > 1x1.
To fix this, copy 160 MHZ mcs from the
staion parameters which gets updated in
change station. Also, use nss parameter
which is passed by lim_populate_he_mcs_set()
in the check which was used to disable mcs
rates corresponding to nss > 1x1. Thus,
peer station nss will be used to
determine whether to disable or not.
Change-Id: I23079aed3795202e6ae32583a220c1ed3227c1dd
CRs-Fixed: 2904540
Firmware sends TWT teardown with status code
WMI_DEL_TWT_STATUS_CONCURRENT_SESSION when a concurrent connection
is established. Currently host driver drops this event as the
status code is not WMI_DEL_TWT_STATUS_ROAMING_INITIATED or
WMI_DEL_TWT_STATUS_PEER_INITIATED.
Add support to handle TWT teardown event with
WMI_DEL_TWT_STATUS_CONCURRENT_SESSION status code.
Change-Id: I408ba960924b4daa1ca4f8337d7e0d1ce52c5fd9
CRs-Fixed: 2899563
API sap_indicate_radar needs to return sap current
frequency instead of channel.
Change-Id: I62a4aae0604b11587a14d17d4c641262b8019ab3
CRs-Fixed: 2900489
Some SAP channel switch requestor will wait for channel switch
completion. Set sap qdf_event after sap hdd callback recevies
eSAP_CHANNEL_CHANGE_RESP.
Change-Id: I15e0733ac2bef6af55e02ff18f94cc2c86eb9811
CRs-Fixed: 2905918
Some legacy Helium firmware doesn't support SAE roaming, but btm cap is set
in associate request of DUT, then connected SAE AP thinks DUT supports btm,
AP will send btm request to DUT, DUT triggers roaming, but fails and
disconnects from current AP, users will complain this unexpected
disconnect.
Change-Id: Ife9860addef6898a518618f555158e7888ac74db
CRs-Fixed: 2884694
When host driver receives RSO_STOP from userspace, HDD sends the
RSO_STOP down to lower layers and starts a wait for response upon
success status.
Below layers(connection mgr/CSR) ignore the RSO_STOP request and
return success if the current state is not RSO_ENABLED or
IN_PROGRESS. This keeps the HDD waiting for response and a timeout
happens after 2 seconds.
So, wait for RSO stop response only if roaming is in enabled state
to avoid this wait and timeout.
Change-Id: I3ed81c5da26ebe05d17fc37dc43665f1f7b7c8b2
CRs-Fixed: 2901494
