During system suspend, the psoc idle timer is stopped. So it may
happen that work was not scheduled and it got removed from the
workqueue. This will result into the module state as enabled after
system resume which will lead to extra power consumption.
So, to avoid this issue, start the psoc idle timer in the system
reume if all interfaces are down and module state is ENABLED.
CRs-Fixed: 2867472
Change-Id: I2151e825919b45727a279a2285293e578ce86ffa
Reduce stack frame size of lim_verify_fils_params_assoc_rsp()
by allocating dynamic memory to fils structures.
Change-Id: Ib24570d87468560f50ee1bcaad360e4729f404aa
CRs-Fixed: 2847120
With WMI_SERVICE_UNIFIED_LL_GET_STA_OVER_QMI_SUPPORT FW service
capability, the INI parameter send_ll_and_get_station_stats_over_qmi
becomes obsolete. Remove corresponding code from host driver.
Change-Id: I3fe59c5401ea13e8c6f209d2302bc1ecde449227
CRs-Fixed: 2849302
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wma layer related files.
Change-Id: Ie4639a6f04877aa41046706118936560200162a6
CRs-Fixed: 2808064
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for hdd/sme/lim related files.
Change-Id: I9bb470cb2af0cc940f9c5dd70942eac0cdd83eb5
CRs-Fixed: 2809268
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for csr related files.
Change-Id: I6527630951ca1c291e027e7ecdb3f9bf4b0a72b3
CRs-Fixed: 2808325
Currently, for every pre CAC request a new vdev sync is getting created
and it will be destroyed only when SAP is stopped. So, there is a possible
memory leak if a valid pre CAC request is issued second time without SAP
stop.
To avoid this, don't create vdev sync for pre CAC request if pre CAC
adapter already exist.
Change-Id: If3f65648645b6801a1504a2d184dbc6928ff4771
CRs-Fixed: 2891360
Currently, the regulatory update event is created in
hdd_regulatory_init. In some cases, the country can be set before this
function, causing a crash. Move the event creation to before the country
setting logic.
Change-Id: I344d0de71f1983b3da7b47b816d6bbb0e402cbe8
CRs-fixed: 2891434
Add support for TWT AP params not in range and IE validation failed
status code.
Change-Id: I939db5388c4e7aac86484b319638a57baf83171e
CRs-Fixed: 2888847
TWT responder support should be announced, if enabled, in the
Extended capabilities IE.
Change-Id: I1355a9ddf2fe0361cb542b4c49b754d8f8a158fc
CRs-Fixed: 2884862
Currently, in TWT after posting the msg via sme to WMA
using scheduler thread. Based on the success or failure
driver set the command_in_progress so that subsequent
commands can be rejected till the current command is completed.
There is a chance, context might be broken because of this,
command_in_progress is not set.
Set the command_in_progress before posting
the msg and if there is an error then again set the
command_in_progress as NONE.
Change-Id: If9dc4bd346178d49d5d940ecf8ae008969cb1e73
CRs-Fixed: 2886135
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for file wma_scan_roam.c.
Change-Id: Ib50d49c566d9aaf124f2eecebe4b652dcbb3b5df
CRs-Fixed: 2807015
Currently, WoW wakeup host event is handled in tasklet context and
it is taking more than 800ms to execute. This is due to excessive
logging to the console from the tasklet. As a result of this, IRQs
are getting blocked during this tasklet execution.
To avoid this, add a sysfs entry to enable/disable console logging
from host wakeup event based on requirement.
Change-Id: If91a8bd5f783f358dabf9dcf46bf4c50d05d7909
CRs-Fixed: 2881972
When SSR happens, Inform the user space about teardown all TWT sessions
in P2P client mode also.
Change-Id: I190529724519a2520dfa190fcb10cafc398745a5
CRs-Fixed: 2879404
Currently, there are two ini option 0/1 to disable/enable ILP
profiles in HW.
Extend this option upto 3 where
0 indicates disable
1 indicates perf settings
2 indicates max power saving
3 indicates balanced settings
Change-Id: Iff41b92b84309a670e2ad301ee72fb3caaba3df3
CRs-Fixed: 2886526
As part of devices recovery, driver sends disconnect event
indication to kernel for all the interface but kernel does
not expects for NAN interface due to which frequent call trace
observed during NAN test.
Remove disconnect event indication from hdd_start_all_adapters()
and move this logic under SSR.
Change-Id: Ifa62a58264fa7c7247f8c0aa8f0ed33138572dd8
CRs-Fixed: 2848186
When the country is being updated via WMI, FW responds with a channel
list after some time. During this time, another event can come, blocking
the channel list from being updated. Add synchronization so that these
requests are blocked until the channel list is updated.
Change-Id: I4c1b7d33242226b8153821fdc14db54fff764c17
CRs-fixed: 2884840
During suspend if the netif queue pause failed for some reason,
network stack may send the pkt for hard_start_xmit and will
crash due to device is in suspend state, so adding a check to
drop the pkt if device was already in system suspended.
Change-Id: I5b8f5511157f10e28297be4366fafe6e683c392b
CRs-Fixed: 2880892
While processing the roam synch indication reassoc response frame,
the new roamed peer object is not created. So call to
mlme_set_twt_peer_capabilities() to update the new peer capabilities
will fail with null peer object for new bssid. So after roaming,
update the peer TWT capabilities once the new peer object is
created.
Update peer TWT capabilities to new peer object after roaming to
avoid invalid peer capabilities.
Change-Id: Ic37bd4d96bf122b2ec3a60c1ae41650a672b9020
CRs-Fixed: 2870589
Introduce HE cap IEs in addstareq. Also, Add
HE capabilities in frames for TDLS Setup Req,
Setup Rsp, Discovery Rsp. Add He Operations
in TDLS setup Confirm.
Implement APIs under feature WLAN_FEATURE_11AX
which will be used to:
1) Fill HE capabilities in TDLS Discovery Response,
TDLS Setup Request, TDLS Setup Response.
2) Fill HE operations in TDLS Setup Confirm.
3) Convert he_capa capabilities from station
parameters to tdls tDot11fIEhe_cap type.
4) Set Chan width based on session, peer
capabilities.
Change-Id: If36b1a3c3eed0e6026043494a097673f9d74b580
CRs-Fixed: 2883443
