IPA module has been moved to CLD component under the converged
driver model. Point the wmi API's and structures to the newly
defined files.
Change-Id: I96205f7cc18dbea1c05a5f6314490ea6b3dd75fd
CRs-Fixed: 2180176
Zero comp value if changed; would be 1 to 8. When accessing
ipv6 array, the access can go out of bounds if value is 8 since
the bytes array is of size 16 (0 to 15). Fix that.
Change-Id: I38eb1d3be2840bfbb5fdc9c72606ce51e29cb0ce
CRs-Fixed: 2196076
Rate limit CE access log to avoid watch dog bark because of
excessive console logging.
Change-Id: I460a39f02206f651eafc26febd5628766e471483
CRs-Fixed: 2207647
While processing a host-to-target credit report, the number of available
credits is incremented before recording the credit report event in the
WMI history log. This can lead to tricky debug scenarios where there is
an available credit, but the WMI history log does not show that a credit
report has been processed. In htc_process_credit_rpt, log the credit
report in the WMI history log before incrementing the available credits
field.
Change-Id: Id8632c85348bec38b6c46549a68f613d102b2ae5
CRs-Fixed: 2204248
Enable mesh vap beaconing ioctl is sent via
vdev setting WMI cmd for WMI_VDEV_PARAM_CAPABILITIES.
But the vdev_param array for tlv is not populated.
Change-Id: Icefd3a506baf3459b95cdc31bd447f80068954df
CRs-Fixed: 2141343
Increase log level of HIF module to ERROR so as to print the CE Ids
when dumping the CE registers as part of target failure handler.
Change-Id: I278f836590cd717c7bdeaf414023aeb646f9da2f
CRs-Fixed: 2205508
As part of IPA componentization remove IPA from HDD module
and make it as an independent component. Add qdf module ID
and Objmgr ID for IPA module.
Change-Id: Id99089f8188e8b1dbf7e1f60d3a127bec770706d
CRs-Fixed: 2180176
Scan node del API is modified to check refcnt before
deleting node. Mark node delete with scan node del before
releasing ref to avoid get ref
Change-Id: I1cde576cd47eb4effe8af38c2d77f02a21349dfb
CRs-Fixed: 2208987
cfg80211_inform_bss_frame_data() takes an extra reference of
bss and it shall be freed by caller.
Change-Id: I6e2a37327fc369d01d237e7ff57221333709b53f
CRs-Fixed: 2205608
Add diag event and its structure to log various connection statistics
after the connection has been made.
Change-Id: I3572cd9230d89e2d4154fd43579c258a2e2bdb58
CRs-Fixed: 2208509
Add header files for the new converged configuration component.
cfg_dispatcher.h: Contains dispatcher lifecycle handlers
cfg_define.h: Tools for components to define new configuration metadata
cfg_ucfg.h: Contains APIs for consuming configuration at runtime
cfg_converged.h: Contains a collection of configuration metadata from
all the converged components
Change-Id: Ief5d3e33dca1bc5f8dba47d9e0c03a97ad1b371f
CRs-Fixed: 2196017
Change Ie062ada403f8a31aebcde691396987ad9e5352b5 introduced level-
specific logging wrappers. Instead of using QDF_TRACE_RATE_LIMITED
directly, consumers should use the level-specific versions instead.
To prevent new consumers of QDF_TRACE_RATE_LIMITED in the future,
rename this API to __QDF_TRACE_RATE_LIMITED.
Change-Id: I06d35f5277fe2e11fbcc0e7e00b6fa99a84bda78
CRs-Fixed: 2208564
MCL operates on both macs with single pdev. So allocate HW link
descriptor pools for each macs.
Change-Id: I5a373bfbd1d15557e1fc66b8af17c2a130cdf5f9
CRs-Fixed: 2176848
In monitor mode, it is needed to reap RXDMP error ring for RING1.
Also need to replenish for RING1.
Add this missing operations.
CRs-Fixed: 2190071
Change-Id: I8cd60c6cb70b472a26d55783d0964e85e99680b9
Initialize MAC1 along with MAC0. 2.4GHz monitor mode operates on
MAC1 so initialize MAC1 and reap both MAC0 and MAC1.
Change-Id: Id281def37d460b224f5f571893266f193846fd0c
CRs-Fixed: 2176848
Currently data in "pl_tgt_hdr" is used directly from firmware without
any length check which may cause buffer over-read.
To address this issue add length check before accessing data offset
Change-Id: Ic2930fdf7168b79a8522be282b0e1cd19214742a
CRs-Fixed: 2191170
In API dp_peer_find_by_id return NULL if delete_in_progress
bit is set, this will avoid referencing peer memory which will
be free in peer_unmap event asynchronously.
Change-Id: Ieab559b9274a886809a9baa9bb348d348e924625
CRs-fixed: 2194265
Donot perform mcast echo check in case of qwrap isolation mode.
In qwrap isolation mode, packets from wired station reaches the wireless
station via the rootap. Thus we need to allow loopback packets in qwrap
isolation mode.
Also add a configuration to set isolation mode.
Change-Id: If4a63abd477596f6b48c6cf9b6e7e5bd84ec95c0
CRs-fixed: 2204033
Based on requirement from customer we have re-organised
AST specific and WDS specific code under different compile
time flags.
Change-Id: Icbb0dff7c2e7a2239d82c296468fa8d3e4f53021
Detach scan start request object from serialization object
on release memory callback. It's requred as some times
serialization ends up calling callback funtcions even after
calling release memory command due to race conditions.
Change-Id: Id0f74032de40bad679c27fe3e5ab1bf83e6dfcf5
CRs-Fixed: 2208227
Assign num_mpdu to mpdu_tried_mcast for mcast stats updation
Defer bss peer assigning till peer map event arrives
Do not set delete_in_progress for bss Peer
Change-Id: I0881ea3c8804990c336d97cb7b239a991ec64fa9
Add WLAN module name as logging prefix in multiple wlan driver
compilation environment for differentiating the logs pertaining
to each driver module.
Change-Id: Ib3aeaa280e3beb0de8ceb105e0989cb6004964d6
CRs-fixed: 2197751
Update WLAN-IPA WDI-2 datapath for DMA buffer sharing with SMMU
Stage 1 translation support. When SMMU Stage 1 is enabled DMA
APIs return IO virtual address(IOVA) instead of physical address.
This IOVA need to mapped to physical address by IPA module
before accessing them.
Change-Id: I33082bc74760b0f12c348238c6f48f5ce5750172
CRS-Fixed: 2072953
Add QDF APIs for DMA buffer allocation and sharing with SMMU
Stage 1 translation support. When SMMU Stage 1 is enabled,
DMA APIs return IO virtual address(IOVA) instead of physical
address. This IOVA needs to be mapped to physical address by
external module before accessing these buffers.
Change-Id: I88e938d8ebe1f32fdea79e3c3aa8a3638ddfd2b8
CRS-Fixed: 2072953
Depending on platform limitations and the intended audience of a
particular WLAN driver build, it would be useful to be able to compile
out specific logging level logs completely. To that end, introduce
per-level logging wrappers, which can be compiled in or out by the build
configuration.
Change-Id: Ie062ada403f8a31aebcde691396987ad9e5352b5
CRs-Fixed: 2205888
QDF_TRACE_RATE_LIMITED() currently rate limits by only printing every
rate'th call to the function from the same location. Instead, prevent
logging messages more than some constant 'k' times per second. This
means any subsequent calls to the API from the same location within 1/k
seconds will be dropped.
Change-Id: I31a3f48f68fb6bc67f59f3157a635345943d3331
CRs-Fixed: 2205794
We need to free the chain of nbufs associated to
an a-msdu if its last msdu is not received and the one
received belongs to a new a-amsdu
Change-Id: Id90e58306650ad885caa79271e81de3bf81ee5bd
When P2P mgmt frame comes and there is same channel ROC requested
but not start, it will be failed to restart ROC timer and then drop
this frame.
Change-Id: I40cc2b66a266ebf2aa1017669e6d97b1c7de3da1
CRs-Fixed: 2202954
