QCN7605 has 2 set of shadow registers, WCSS block and PCIe block.
As PCIe shadow register are at power domain boundary, enabling
PCIe shadow register for QCN7605.
Also PCIe shadow register falls below 512KB, no need to use register
windowing which is required to get it access from IPA FW.
Change-Id: Ic0bbc2de4c3e32c4fb6453d273f0f29d19f3537c
CRs-Fixed: 2623851
Add ini config required for FTM time sync feature.
"enable_time_sync_ftm"- ini to enable/disable the feature.
"time_sync_ftm_mode" - ini to configure the burst/aggregated mode.
In burst mode the offset derived for each RTT frame is sent by
firmware, in aggregated mode only one offset is sent by firmware.
"time_sync_ftm_role" - ini to configure slave(STA)/master(SAP) role.
Change-Id: I6a06d6fdc4c7556c32ab2d28f1cbaa936b98a85b
CRs-Fixed: 2618654
The ch_params of sap_ctx->csr_roamProfile is not populated
correctly during SAP channel switching.
Fix it and send channel change event to supplicant with
correct seg0/seg1 value.
Change-Id: I7ef82c6e79b970edfee58d9960e8c6b42fa91ef8
CRs-Fixed: 2594973
Function wireless_send_event() is only present in the kernel when
wireless extensions are enabled. In order to allow the driver to build
when wireless extensions are disabled, put a wrapper around that
function.
Note that this is only a partial solution to the problem since this
means that when wireless extensions are disabled that the event will
not be sent to userspace. A subsequent effort will need to evaluate
each event to see if a cfg80211-based notification mechanism is
already in place, and if not, if one needs to be added in order to
maintain the underlying functionality.
Change-Id: Icbdddf6735bdc5ffd1ee189b5fabfa67fcce59ea
CRs-Fixed: 2621699
Currently there is logic to set the net device wireless_handlers
pointer to NULL in both hdd_deinit_station_mode() and
hdd_deinit_ap_mode(). This is unnecessary duplication of code, and
worse, this is WEXT-specific logic that exists outside the
WEXT-specific source files. In order to address these issues refactor
the logic into a new function that is exposed by wlan_hdd_wext.h.
Change-Id: I0fab5a7f35941f282ddf2e286fb12bfb8c4c7c50
CRs-Fixed: 2620818
Add proper NULL check for ht_info before accessing the structure. This
field is sent as a part of the event from FW and could be NULL.
Change-Id: I55dd7dcbe4ecdafe6a97ebcf2c7d9f08af30d8a2
CRs-Fixed: 2615175
Register tx and rx ops to send packet capture mode command and
to receive mgmt offload handler for packet capture component.
Change-Id: I70da00feff29399b98c5916eec17e26b62285db3
CRs-Fixed: 2619321
The host driver start scan request on channels in the operating
class requested in the beacon report request. Starting from first
channel all channels are scanned one after another. The scan
request is sent in correct order of the channels in operating
class, but when filtering the scan results from the scan db, the
channel freqency is not indexed properly so first channel is sent
to the filter always. Due to this, always beacon report response
has only entries from first channel from the OP class.
Populate the correct channel frequency to filter the rrm scan
result.
Change-Id: I75461a4da99be9ef215f8c16258e0e21877fe362
CRs-Fixed: 2619363
If resume and fw wakeup happens at the same time.
psoc_ctx->lock maybe doing bottom half operation for resume,
then wakeup interrupt comes on same cpu, the interrupt
handler will also acquire psoc_ctx->lock in
pmo_core_update_wow_initial_wake_up, which cause dead lock.
Using atomic for wow_initial_wake_up, so the interrupt handler
can avoid using spin_lock.
Change-Id: Id0e963a0924415e9660c57a1c1b776d3e609213d
CRs-Fixed: 2624899
Add support for the following NAN messages in kmsg:-
1. NAN enable status
2. NAN, NDP match events
3. NDP channel info.
etc.
Change-Id: Icbf8f4ed05a7bd181a076d526dd2e01d70be6b05
CRs-Fixed: 2618835
In 6ghz, while sending broadcast/unicast probe req and assoc req
host should set correct values for PPE Thresholds in HE Cap IE
Change-Id: I1ec2d628dcc221a3c222882fd11419a656448dd0
CRs-Fixed: 2619289
Enable SMMU_S1 and METERING Features in IPA for all the
Helium based Adrastea targets, by default.
Change-Id: I2cefe6f137415f22f2005a1c6f2d29d23fe08fea
CRs-Fixed: 2624096
5G 160M related HE Phy Caps comes from 5G MAC's HE Caps.
Change csr_revise_req_he_cap_per_band API to override the caps
with 5G MAC Caps if STA or SAP starts on non-2G channel.
Change-Id: I250385a64fdb4e043d150ed4e29cd07d10d00880
CRs-Fixed: 2620815
Currently there is no bit reserved to indicate the support
for 11bg/11abg 802.11 mode.
As per new requirement update the meaning of bit positions
in sta info structure to indicate all the required mode
information.
Change-Id: I37e72442f512020c25fec3ca66fb6facb50f92f2
CRs-Fixed: 2623453
Enhance logs in policy mgr module to remove duplicate
or unwanted prints and keep only useful logs to debug.
Change-Id: Ifd585256955aceec29286d82838be0c588228c32
CRs-Fixed: 2614763
Process management Tx and Rx frames for packet capture mode
and post frames to the mon thread.
Change-Id: I14c0a1cf8a8aa4d4a4e16ad6200715b875611c81
CRs-Fixed: 2619317
Send vdev param command to FW for STA vdev to set the packet
capture mode. Send the command only if packet capture support
is enabled.
Change-Id: Ifed2431882b1f7d2869771e812daa5bcd5dc17e9
CRs-Fixed: 2619314
Combine and print channel for ACS and roam channels, instead
of printing one channel at a time.
Change-Id: I398678e1843849bdf4f4c72f0315c626c97438a6
CRs-Fixed: 2623805
Fisa flow in FT still exists even after vdev teardown. Same vdev
type is reinitialized with different vdev pointer.
So take care to update the fisa_flow vdev with current vdev.
Change-Id: Ib52c6d1ea5354532a42fd0065db740c96d78ebc6
CRs-Fixed: 2621691
Add BTM Query/Request prefix for BTM debug prints and Neighbor
Req/Resp prefix for Neighbor report logging. If the time
received from the firmware is zero, it implies AP has not sent
the response for the neighbor req/btm query. So log this info
as well. When channel count is zero, log that no channel update
from AP.
Refactor 11kv logging for more details.
Change-Id: I10bb731ce410215eb48322a2f8ad9ed8723e5270
CRs-Fixed: 2623418
Extend ini value to disconnect from current AP
if roam failure happens after the NUD failure.
Change-Id: Id764c97b5c1748b1d513d85d4063868a1c77141b
CRs-Fixed: 2622087
