commit 4cc01410e1c1dd075df10f750775c81d1cb6672b upstream.
Add serial support for OWON HDS200 series oscilloscopes and likely
many other pieces of OWON test equipment.
OWON HDS200 series devices host two USB endpoints, designed to
facilitate bidirectional SCPI. SCPI is a predominately ASCII text
protocol for test/measurement equipment. Having a serial/tty interface
for these devices lowers the barrier to entry for anyone trying to
write programs to communicate with them.
The following shows the USB descriptor for the OWON HDS272S running
firmware V5.7.1:
Bus 001 Device 068: ID 5345:1234 Owon PDS6062T Oscilloscope
Negotiated speed: Full Speed (12Mbps)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x5345 Owon
idProduct 0x1234 PDS6062T Oscilloscope
bcdDevice 1.00
iManufacturer 1 oscilloscope
iProduct 2 oscilloscope
iSerial 3 oscilloscope
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0029
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 5 Physical Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 5f 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 32
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
OWON appears to be using the same USB Vendor and Product ID for many
of their oscilloscopes. Looking at the discussion about the USB
vendor/product ID, in the link bellow, suggests that this VID/PID is
shared with VDS, SDS, PDS, and now the HDS series oscilloscopes.
Available documentation for these devices seems to indicate that all
use a similar SCPI protocol, some with RS232 options. It is likely that
this same simple serial setup would work correctly for them all.
Link: https://usb-ids.gowdy.us/read/UD/5345/1234
Signed-off-by: Craig Hesling <craig@hesling.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b399078f882b6e5d32da18b6c696cc84b12f90d5 upstream.
Abacus Electrics makes optical probes for interacting with smart meters
over an optical interface.
At least one version uses an FT232B chip (as detected by ftdi_sio) with
a custom USB PID, which needs to be added to the list to make the device
work in a plug-and-play fashion.
Signed-off-by: Michael Ehrenreich <michideep@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1ca3ff28ab1e2c1e70713ef3fa7943c725742c3 upstream.
startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS.
The register is also accessed from write() callback.
If console were printing and startup()/shutdown() callback
gets called, its access to the register could be overwritten.
Add port->lock to startup()/shutdown() callbacks to make sure
their access to SIFIVE_SERIAL_IE_OFFS is synchronized against
write() callback.
Fixes: 45c054d081 ("tty: serial: add driver for the SiFive UART")
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Rule: add
Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com
Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ab75eee1a056f896b87d139044dd103adc532b9 upstream.
Version 1.60 specifically needs this quirk.
Version 2.00 is known good.
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250403180004.343133-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c7f1bfdb2249f854a736d9b79778c7e5a29a150 upstream.
In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev'
would be released in mcb_device_register() via put_device().
Thus, goto 'err' label and free 'mdev' again causes a double free.
Just return if mcb_device_register() fails.
Fixes: 3764e82e51 ("drivers: Introduce MEN Chameleon Bus")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/6201d09e2975ae5789879f79a6de4c38de9edd4a.1741596225.git.jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbd3039a64b01b769040677c4fc68badeca8e3b2 upstream.
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6ccbda44e2cc3d26fd22af54c650d6d5d801addf ]
Similarly to the previous patch, we need to safe guard hfsc_dequeue()
too. But for this one, we don't have a reliable reproducer.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250417184732.943057-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df275ef0a6ae181e8428a6589ef5d5231e58b5c ]
This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class
handling. The issue occurs due to a time-of-check/time-of-use condition
in hfsc_change_class() when working with certain child qdiscs like netem
or codel.
The vulnerability works as follows:
1. hfsc_change_class() checks if a class has packets (q.qlen != 0)
2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g.,
codel, netem) might drop packets and empty the queue
3. The code continues assuming the queue is still non-empty, adding
the class to vttree
4. This breaks HFSC scheduler assumptions that only non-empty classes
are in vttree
5. Later, when the class is destroyed, this can lead to a Use-After-Free
The fix adds a second queue length check after qdisc_peek_len() to verify
the queue wasn't emptied.
Fixes: 21f4d5cc25 ("net_sched/hfsc: fix curve activation in hfsc_change_class()")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Reviewed-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250417184732.943057-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f0ee992adf601aa00c252418266177eb7ac2bc ]
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
Fixes: 3928ee6485 ("net: phy: leds: Add support for "link" trigger")
Fixes: 2e0bc452f4 ("net: phy: leds: add support for led triggers on phy link state change")
Signed-off-by: Hao Guan <hao.guan@siflower.com.cn>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b24dc731731edf762f9454552cb3a5b7224949 ]
cpufreq_cpu_get_raw() can return NULL when the target CPU is not present
in the policy->cpus mask. scpi_cpufreq_get_rate() does not check for
this case, which results in a NULL pointer dereference.
Fixes: 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e3d9508c056d7e0a56b58d5c81253e2a0d22b6c ]
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 031db09017 ("drm/amd/powerplay/vega20: enable fan RPM and pwm settings V2")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 919d14603dab6a9cf03ebbeb2cfa556df48737c8 ]
There are two variables that indicate the interrupt type to be used
in the next test execution, global "irq_type" and "test->irq_type".
The former is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
In the pci_endpoint_test_request_irq(), since this global variable
is referenced when an error occurs, the unintended error message is
displayed.
For example, after running "pcitest -i 2", the following message
shows "MSI 3" even if the current IRQ type becomes "MSI-X":
pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3
SET IRQ TYPE TO MSI-X: NOT OKAY
Fix this issue by using "test->irq_type" instead of global "irq_type".
Cc: stable@vger.kernel.org
Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd288666979a49538d70e0c0d86e1118b445058 ]
In the root complex pci endpoint test function driver, change macros and
functions names using the term "legacy" to use "intx" instead to
match the term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-6-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 919d14603dab ("misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58ff9c5acb4aef58e118bbf39736cc4d6c11a3d3 ]
Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit about the type
of IRQ being referenced as well as to match the PCI specifications
terms. Redefine PCI_IRQ_LEGACY as an alias to PCI_IRQ_INTX to avoid the
need for doing the renaming tree-wide. New drivers and new code should
now prefer using PCI_IRQ_INTX instead of PCI_IRQ_LEGACY.
Link: https://lore.kernel.org/r/20231122060406.14695-2-dlemoal@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 919d14603dab ("misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8236644f5ecb180e80ad92d691c22bc509b747bb ]
The ad7768-1 ADC output code is two's complement, meaning that the voltage
conversion result is a signed value.. Since the value is a 24 bit one,
stored in a 32 bit variable, the sign should be extended in order to get
the correct representation.
Also the channel description has been updated to signed representation,
to match the ADC specifications.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/505994d3b71c2aa38ba714d909a68e021f12124c.1741268122.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af1c801a15225304a6328258efbf2bee245c654 ]
The data used is all in local variables so there is no advantage
in setting *val = ret with the direct mode claim held.
Move it later to after error check.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250217141630.897334-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 8236644f5ecb ("iio: adc: ad7768-1: Fix conversion result sign")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9a457722cf5e3534be5ffab549d6b49737fca72 ]
The VTU registers of the 6320 family use the 6352 semantics, not 6185.
Fix it.
Fixes: b8fee95710 ("net: dsa: mv88e6xxx: add VLAN Get Next support")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: <stable@vger.kernel.org> # 5.15.x
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-2-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 143d75583f2427f3a97dba62413c4f0604867ebf ]
Move the v4l2_info() call displaying the video device name after the
device is actually registered.
This fixes a bug where the driver was always displaying "/dev/video0"
since it was reading from the vfd before it was registered.
Fixes: cf7f34777a5b ("media: vim2m: Register video device after setting up internals")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5e206778e96e8667d3bde695ad372c296dc9353 ]
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ac27a0ec11 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mahmoud Adam <mngyadam@amazon.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Link: https://patch.msgid.link/b3ae36a6794c4a01944c7d70b403db5b@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 707d1a2f601bea6110a5633054253c0cb71b44c1 ]
Make __ext4_check_dir_entry() a bit easier to understand, and reduce
the object size of the function by over 11%.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20191209004346.38526-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: d5e206778e96 ("ext4: fix OOB read when checking dotdot dir")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87d3af7419307ae26e705a2b2db36140db367a2 ]
This fixes an analogus bug that was fixed in xfs in commit
4b8d867ca6e2 ("xfs: don't over-report free space or inodes in
statvfs") where statfs can report misleading / incorrect information
where project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests for
this bug.
Cc: stable@kernel.org
Fixes: 689c958cbe ("ext4: add project quota support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46d36880d1c6f9b9a0cbaf90235355ea1f4cab96 ]
Coverity reports that conditions checking quota limits in ext4_statfs()
contain dead code. Indeed it is right and current conditions can be
simplified.
Link: https://lore.kernel.org/r/20200130111148.10766-1-jack@suse.cz
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Stable-dep-of: f87d3af74193 ("ext4: don't over-report free space or inodes in statvfs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9462e74c5c983cce34019bfb27f734552bebe59f ]
After resume/online turbo limit ratio (TRL) is restored partially if
the admin explicitly changed TRL from user space.
A hash table is used to store SST mail box and MSR settings when modified
to restore those settings after resume or online. This uses a struct
isst_cmd field "data" to store these settings. This is a 64 bit field.
But isst_store_new_cmd() is only assigning as u32. This results in
truncation of 32 bits.
Change the argument to u64 from u32.
Fixes: f607874f35 ("platform/x86: ISST: Restore state on resume")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250328224749.2691272-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a759109b234385b74d2f5f4c86b5f59b3201ec12 upstream.
Synchronize the declaration of ds1287_set_base_clock() between
cevt-ds1287.c and ds1287.h.
Fix follow error with gcc-14 when -Werror:
arch/mips/kernel/cevt-ds1287.c:21:5: error: conflicting types for ‘ds1287_set_base_clock’; have ‘int(unsigned int)’
21 | int ds1287_set_base_clock(unsigned int hz)
| ^~~~~~~~~~~~~~~~~~~~~
In file included from arch/mips/kernel/cevt-ds1287.c:13:
./arch/mips/include/asm/ds1287.h:11:13: note: previous declaration of ‘ds1287_set_base_clock’ with type ‘void(unsigned int)’
11 | extern void ds1287_set_base_clock(unsigned int clock);
| ^~~~~~~~~~~~~~~~~~~~~
make[7]: *** [scripts/Makefile.build:207: arch/mips/kernel/cevt-ds1287.o] Error 1
make[6]: *** [scripts/Makefile.build:465: arch/mips/kernel] Error 2
make[6]: *** Waiting for unfinished jobs....
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3be225f338a578851a7b607a409f476354a8deb upstream.
Address the issue of cevt-ds1287.c not including the ds1287.h header
file.
Fix follow errors with gcc-14 when -Werror:
arch/mips/kernel/cevt-ds1287.c:15:5: error: no previous prototype for ‘ds1287_timer_state’ [-Werror=missing-prototypes]
15 | int ds1287_timer_state(void)
| ^~~~~~~~~~~~~~~~~~
arch/mips/kernel/cevt-ds1287.c:20:5: error: no previous prototype for ‘ds1287_set_base_clock’ [-Werror=missing-prototypes]
20 | int ds1287_set_base_clock(unsigned int hz)
| ^~~~~~~~~~~~~~~~~~~~~
arch/mips/kernel/cevt-ds1287.c:103:12: error: no previous prototype for ‘ds1287_clockevent_init’ [-Werror=missing-prototypes]
103 | int __init ds1287_clockevent_init(int irq)
| ^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[7]: *** [scripts/Makefile.build:207: arch/mips/kernel/cevt-ds1287.o] Error 1
make[7]: *** Waiting for unfinished jobs....
make[6]: *** [scripts/Makefile.build:465: arch/mips/kernel] Error 2
make[6]: *** Waiting for unfinished jobs....
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55fa5868519bc48a7344a4c070efa2f4468f2167 upstream.
Declare which_prom() as static to suppress gcc compiler warning that
'missing-prototypes'. This function is not intended to be called
from other parts.
Fix follow error with gcc-14 when -Werror:
arch/mips/dec/prom/init.c:45:13: error: no previous prototype for ‘which_prom’ [-Werror=missing-prototypes]
45 | void __init which_prom(s32 magic, s32 *prom_vec)
| ^~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:207: arch/mips/dec/prom/init.o] Error 1
make[5]: *** [scripts/Makefile.build:465: arch/mips/dec/prom] Error 2
make[5]: *** Waiting for unfinished jobs....
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad993a95c508417acdeb15244109e009e50d8758 upstream.
This adds validation for used length (might come
from an untrusted device) to avoid data corruption
or loss.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210531135852.113-1-xieyongji@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Larry: backport to 5.4.y. Minor conflict resolved due to missing commit 9ce6146ec7b50
virtio_net: Add XDP frame size in two code paths ]
Signed-off-by: Larry Bassel <larry.bassel@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdfa083549de5d50ebf7f6811f33757781e838c0 upstream.
Make loading ib_srpt with this parameter set work. The current behavior is
that setting that parameter while loading the ib_srpt kernel module
triggers the following kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
parse_one+0x18c/0x1d0
parse_args+0xe1/0x230
load_module+0x8de/0xa60
init_module_from_file+0x8b/0xd0
idempotent_init_module+0x181/0x240
__x64_sys_finit_module+0x5a/0xb0
do_syscall_64+0x5f/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: LiHonggang <honggangli@163.com>
Reported-by: LiHonggang <honggangli@163.com>
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
[ Alok: Backport to 5.4.y since the commit has already been backported to
5.15y, 5.10.y, and 4.19.y ]
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47e55e4b410f7d552e43011baa5be1aab4093990 upstream.
Commit in a fixes tag attempted to fix the issue in the following
sequence of calls:
do_output
-> ovs_vport_send
-> dev_queue_xmit
-> __dev_queue_xmit
-> netdev_core_pick_tx
-> skb_tx_hash
When device is unregistering, the 'dev->real_num_tx_queues' goes to
zero and the 'while (unlikely(hash >= qcount))' loop inside the
'skb_tx_hash' becomes infinite, locking up the core forever.
But unfortunately, checking just the carrier status is not enough to
fix the issue, because some devices may still be in unregistering
state while reporting carrier status OK.
One example of such device is a net/dummy. It sets carrier ON
on start, but it doesn't implement .ndo_stop to set the carrier off.
And it makes sense, because dummy doesn't really have a carrier.
Therefore, while this device is unregistering, it's still easy to hit
the infinite loop in the skb_tx_hash() from the OVS datapath. There
might be other drivers that do the same, but dummy by itself is
important for the OVS ecosystem, because it is frequently used as a
packet sink for tcpdump while debugging OVS deployments. And when the
issue is hit, the only way to recover is to reboot.
Fix that by also checking if the device is running. The running
state is handled by the net core during unregistering, so it covers
unregistering case better, and we don't really need to send packets
to devices that are not running anyway.
While only checking the running state might be enough, the carrier
check is preserved. The running and the carrier states seem disjoined
throughout the code and different drivers. And other core functions
like __dev_direct_xmit() check both before attempting to transmit
a packet. So, it seems safer to check both flags in OVS as well.
Fixes: 066b86787fa3 ("net: openvswitch: fix race on port output")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Closes: https://mail.openvswitch.org/pipermail/ovs-discuss/2025-January/053423.html
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250109122225.4034688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Carlos Soto <carlos.soto@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 066b86787fa3d97b7aefb5ac0a99a22dad2d15f8 upstream.
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604
stuck message:
watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
<IRQ>
netdev_core_pick_tx+0xa4/0xb0
__dev_queue_xmit+0xf8/0x510
? __bpf_prog_exit+0x1e/0x30
dev_queue_xmit+0x10/0x20
ovs_vport_send+0xad/0x170 [openvswitch]
do_output+0x59/0x180 [openvswitch]
do_execute_actions+0xa80/0xaa0 [openvswitch]
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
ovs_execute_actions+0x4c/0x120 [openvswitch]
ovs_dp_process_packet+0xa1/0x200 [openvswitch]
? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
? __htab_map_lookup_elem+0x4e/0x60
? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
? trace_call_bpf+0xc8/0x150
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? kprobe_perf_func+0x4f/0x2b0
? __mod_memcg_lruvec_state+0x63/0xe0
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23d/0xf00
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x15/0x60
process_backlog+0x9e/0x170
__napi_poll+0x33/0x180
net_rx_action+0x126/0x280
? ttwu_do_activate+0x72/0xf0
__do_softirq+0xd9/0x2e7
? rcu_report_exp_cpu_mult+0x1b0/0x1b0
do_softirq+0x7d/0xb0
</IRQ>
<TASK>
__local_bh_enable_ip+0x54/0x60
ip_finish_output2+0x191/0x460
__ip_finish_output+0xb7/0x180
ip_finish_output+0x2e/0xc0
ip_output+0x78/0x100
? __ip_finish_output+0x180/0x180
ip_local_out+0x5e/0x70
__ip_queue_xmit+0x184/0x440
? tcp_syn_options+0x1f9/0x300
ip_queue_xmit+0x15/0x20
__tcp_transmit_skb+0x910/0x9c0
? __mod_memcg_state+0x44/0xa0
tcp_connect+0x437/0x4e0
? ktime_get_with_offset+0x60/0xf0
tcp_v4_connect+0x436/0x530
__inet_stream_connect+0xd4/0x3a0
? kprobe_perf_func+0x4f/0x2b0
? aa_sk_perm+0x43/0x1c0
inet_stream_connect+0x3b/0x60
__sys_connect_file+0x63/0x70
__sys_connect+0xa6/0xd0
? setfl+0x108/0x170
? do_fcntl+0xe8/0x5a0
__x64_sys_connect+0x18/0x20
do_syscall_64+0x5c/0xc0
? __x64_sys_fcntl+0xa9/0xd0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? do_syscall_64+0x69/0xc0
? __sys_setsockopt+0xea/0x1e0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? __x64_sys_setsockopt+0x1f/0x30
? do_syscall_64+0x69/0xc0
? irqentry_exit+0x1d/0x30
? exc_page_fault+0x89/0x170
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
</TASK>
Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carlos Soto <carlos.soto@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aea62c744a9ae2a8247c54ec42138405216414da upstream.
To check if mmc cqe is in halt state, need to check set/clear of CQHCI_HALT
bit. At this time, we need to check with &, not &&.
Fixes: a4080225f5 ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Seunghwan Baek <sh8267.baek@samsung.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240829061823.3718-2-sh8267.baek@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b304c006b0fb4f0517a8c4ba8c46e88f48a069c upstream.
The functions nvmet_fc_iodnum() and nvmet_fc_fodnum() are currently
unutilized.
Following commit c53432030d ("nvme-fabrics: Add target support for FC
transport"), which introduced these two functions, they have not been
used at all in practice.
Remove them to resolve the compiler warnings.
Fix follow errors with clang-19 when W=1e:
drivers/nvme/target/fc.c:177:1: error: unused function 'nvmet_fc_iodnum' [-Werror,-Wunused-function]
177 | nvmet_fc_iodnum(struct nvmet_fc_ls_iod *iodptr)
| ^~~~~~~~~~~~~~~
drivers/nvme/target/fc.c:183:1: error: unused function 'nvmet_fc_fodnum' [-Werror,-Wunused-function]
183 | nvmet_fc_fodnum(struct nvmet_fc_fcp_iod *fodptr)
| ^~~~~~~~~~~~~~~
2 errors generated.
make[8]: *** [scripts/Makefile.build:207: drivers/nvme/target/fc.o] Error 1
make[7]: *** [scripts/Makefile.build:465: drivers/nvme/target] Error 2
make[6]: *** [scripts/Makefile.build:465: drivers/nvme] Error 2
make[6]: *** Waiting for unfinished jobs....
Fixes: c53432030d ("nvme-fabrics: Add target support for FC transport")
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2cd3452d5f8b66d49a73138fba5baadd5b489bd upstream.
The DRD module calls dwc3_set_mode() on role switches, i.e. when a device is
being plugged in. In order to support continuous runtime power management when
plugging in / unplugging a cable, we need to call pm_runtime_get_sync() in
this path.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baaef0a274cfb75f9b50eab3ef93205e604f662c upstream.
There are two variables that indicate the interrupt type to be used
in the next test execution, "irq_type" as global and "test->irq_type".
The global is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
The type set in this function isn't reflected in the global "irq_type",
so ioctl(PCITEST_GET_IRQTYPE) returns the previous type.
As a result, the wrong type is displayed in old version of "pcitest"
as follows:
- Result of running "pcitest -i 0"
SET IRQ TYPE TO LEGACY: OKAY
- Result of running "pcitest -I"
GET IRQ TYPE: MSI
Whereas running the new version of "pcitest" in kselftest results in an
error as follows:
# RUN pci_ep_basic.LEGACY_IRQ_TEST ...
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1)
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type
Fix this issue by propagating the current type to the global "irq_type".
Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225110252.28866-5-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6cb7828c8e17520d4f5afb416515d3fae1af9a9 upstream.
After devm_request_irq() fails with error in pci_endpoint_test_request_irq(),
the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs
have been released.
However, some requested IRQs remain unreleased, so there are still
/proc/irq/* entries remaining, and this results in WARN() with the
following message:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0'
WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c
To solve this issue, set the number of remaining IRQs to test->num_irqs,
and release IRQs in advance by calling pci_endpoint_test_release_irq().
Cc: stable@vger.kernel.org
Fixes: e03327122e ("pci_endpoint_test: Add 2 ioctl commands")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-3-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8c526f2bdf1845bedaf6a478816a3d06fa78b8f upstream.
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc394 ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/
Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Resolved conflicts due to context difference]
Signed-off-by: Nathan Gao <zcgao@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dcd71b45df34d9b903450fab147ee8c1e6c16b5 upstream.
LLVM revision r374662 gives LLVM the ability to convert certain loops
into a reference to bcmp as an optimization; this breaks
prom_init_check.sh:
CALL arch/powerpc/kernel/prom_init_check.sh
Error: External symbol 'bcmp' referenced from prom_init.c
make[2]: *** [arch/powerpc/kernel/Makefile:196: prom_init_check] Error 1
bcmp is defined in lib/string.c as a wrapper for memcmp so this could
be added to the whitelist. However, commit
450e7dd400 ("powerpc/prom_init: don't use string functions from
lib/") copied memcmp as prom_memcmp to avoid KASAN instrumentation so
having bcmp be resolved to regular memcmp would break that assumption.
Furthermore, because the compiler is the one that inserted bcmp, we
cannot provide something like prom_bcmp.
To prevent LLVM from being clever with optimizations like this, use
-ffreestanding to tell LLVM we are not hosted so it is not free to
make transformations like this.
Reviewed-by: Nick Desaulneris <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191119045712.39633-4-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84ffc79bfbf70c779e60218563f2f3ad45288671 upstream.
A recent optimization change in LLVM [1] aims to transform certain loop
idioms into calls to strlen() or wcslen(). This change transforms the
first while loop in UniStrcat() into a call to wcslen(), breaking the
build when UniStrcat() gets inlined into alloc_path_with_tree_prefix():
ld.lld: error: undefined symbol: wcslen
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
>>> referenced by nls_ucs2_utils.h:54 (fs/smb/client/../../nls/nls_ucs2_utils.h:54)
>>> vmlinux.o:(alloc_path_with_tree_prefix)
Disable this optimization with '-fno-builtin-wcslen', which prevents the
compiler from assuming that wcslen() is available in the kernel's C
library.
[ More to the point - it's not that we couldn't implement wcslen(), it's
that this isn't an optimization at all in the context of the kernel.
Replacing a simple inlined loop with a function call to the same loop
is just stupid and pointless if you don't have long strings and fancy
libraries with vectorization support etc.
For the regular 'strlen()' cases, we want the compiler to do this in
order to handle the trivial case of constant strings. And we do have
optimized versions of 'strlen()' on some architectures. But for
wcslen? Just no. - Linus ]
Cc: stable@vger.kernel.org
Link: 9694844d7e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[nathan: Resolve small conflict in older trees]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e4e249018d208678888bdf22f6b652728106528 upstream.
Since acpi_processor_notify() can be called before registering a cpufreq
driver or even in cases when a cpufreq driver is not registered at all,
cpufreq_update_limits() needs to check if a cpufreq driver is present
and prevent it from being unregistered.
For this purpose, make it call cpufreq_cpu_get() to obtain a cpufreq
policy pointer for the given CPU and reference count the corresponding
policy object, if present.
Fixes: 5a25e3f7cc ("cpufreq: intel_pstate: Driver-specific handling of _PPC updates")
Closes: https://lore.kernel.org/linux-acpi/Z-ShAR59cTow0KcR@mail-itl
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/1928789.tdWV9SEqCh@rjwysocki.net
[do not use __free(cpufreq_cpu_put) in a backport]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d098000ac193f359e6b8ca4801dbdbd6a27b41f upstream.
There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.
For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.
Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3589211e9b ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3b93547b91ad849b58eb5ab2dd070950ad7beb3 upstream.
Switch away from using sha1 for module signing by default and use the
more modern sha512 instead, which is what among others Arch, Fedora,
RHEL, and Ubuntu are currently using for their kernels.
Sha1 has not been considered secure against well-funded opponents since
2005[1]; since 2011 the NIST and other organizations furthermore
recommended its replacement[2]. This is why OpenSSL on RHEL9, Fedora
Linux 41+[3], and likely some other current and future distributions
reject the creation of sha1 signatures, which leads to a build error of
allmodconfig configurations:
80A20474797F0000:error:03000098:digital envelope routines:do_sigver_init:invalid digest:crypto/evp/m_sigver.c:342:
make[4]: *** [.../certs/Makefile:53: certs/signing_key.pem] Error 1
make[4]: *** Deleting file 'certs/signing_key.pem'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [.../scripts/Makefile.build:478: certs] Error 2
make[2]: *** [.../Makefile:1936: .] Error 2
make[1]: *** [.../Makefile:224: __sub-make] Error 2
make[1]: Leaving directory '...'
make: *** [Makefile:224: __sub-make] Error 2
This change makes allmodconfig work again and sets a default that is
more appropriate for current and future users, too.
Link: https://www.schneier.com/blog/archives/2005/02/cryptanalysis_o.html [1]
Link: https://csrc.nist.gov/projects/hash-functions [2]
Link: https://fedoraproject.org/wiki/Changes/OpenSSLDistrustsha1SigVer [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: kdevops <kdevops@lists.linux.dev> [0]
Link: https://github.com/linux-kdevops/linux-modules-kpd/actions/runs/11420092929/job/31775404330 [0]
Link: https://lore.kernel.org/r/52ee32c0c92afc4d3263cea1f8a1cdc809728aff.1729088288.git.linux@leemhuis.info
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96a720db59ab330c8562b2437153faa45dac705f upstream.
There was a mistake in the SNR uncore spec. The counter increments for
every 32 bytes of data sent from the IO agent to the SOC, not 4 bytes
which was documented in the spec.
The event list has been updated:
"EventName": "UNC_IIO_BANDWIDTH_IN.PART0_FREERUN",
"BriefDescription": "Free running counter that increments for every 32
bytes of data sent from the IO agent to the SOC",
Update the scale of the IIO bandwidth in free running counters as well.
Fixes: 210cc5f9db ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250416142426.3933977-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71dcc11c2cd9e434c34a63154ecadca21c135ddd upstream.
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f583 ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a94fd938df2b1628da66b498aa0eeb89593bc7a2 upstream.
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added.
Fixes: a62a8ef9d9 ("virtio-fs: add virtiofs filesystem")
Cc: <stable@vger.kernel.org> # all LTS kernels
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Link: https://lore.kernel.org/20250407115111.25535-1-xiangsheng.hou@mediatek.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit adf53771a3123df99ca26e38818760fbcf5c05d0 upstream.
When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():
In file included from include/linux/string.h:392,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from arch/riscv/include/asm/processor.h:55,
from include/linux/sched.h:13,
from kernel/ptrace.c:13:
In function 'fortify_memcpy_chk',
inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.
Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c66 ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").
Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
