TP:
There is a compilation error on kernel 5.4:
ERROR: sensors_classdev_unregister undefined!
ERROR: sensors_classdev_register undefined!
So specific the depended module sensors symbol file.
NO_PROP_NEEDED: <only for v(CR) project>
Change-Id: I4d0acbc01e8c91c6d0226e26e1cd408d55b8df9c
Reviewed-on: https://gerrit.mot.com/1708522
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
when exfat unmounted, but fs_error maybe callbacked by block layer
still.so just check whether the sb and sb_fs_info was released.
Change-Id: I30f55a2f3a20cbaecccbcf12d143590a02d1bf19
Signed-off-by: yuedl1 <yuedl1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1708296
Tested-by: Jira Key
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Check for charge fcc higher than total combined batt fcc specs
and scale down to prevent initial over current condition when
charger first start and when temp or state changes occur.
NO_PROP_NEEDED: Applies to smith and also olson
Change-Id: I68de21a244256787a29467a765431ffad9b4fadf
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1708110
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
fix the compile error during GKI kernel 5.4:
/home/xizx/work/moto/8350/8350_mainline_0724-new/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_info/mmi_ram_info.c:17:10: fatal error: 'linux/mmi_annotate.h' file not found
/home/xizx/work/moto/8350/8350_mainline_0724-new/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_info/mmi_storage_info.c:19:10: fatal error: 'linux/mmi_annotate.h' file not found
/home/xizx/work/moto/8350/8350_mainline_0724-new/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_info/mmi_boot_info.c:31:10: fatal error: 'soc/qcom/mmi_boot_info.h' file not found
Change-Id: I1a8c6b103e6cb1c77df6a428154d47dfc74a734a
Reviewed-on: https://gerrit.mot.com/1707443
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
The dma_remap() is not supported again in GKI kernel 5.4, so use vmap
to remap the reserved memory.
build error:
make[1]: Entering directory `/home/xizx/work/moto/8350/8350_mainline_0626_kernel/out/target/product/jordan/obj/kernel/msm-5.4'
CC [M] ../../motorola/kernel/modules/drivers/mmi_annotate/mmi_annotate.o
/home/xizx/work/moto/8350/8350_mainline_0626_kernel/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_annotate/mmi_annotate.c:143:17: error: implicit declaration of function 'dma_remap'
Change-Id: I47a32fdcd98d92428223ec481a90c51875baaac6
Reviewed-on: https://gerrit.mot.com/1651707
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
motorola/kernel/modules/drivers/input/misc/ets_fps_mmi/:
Call display panel early power-on when finger is detected.
To avoid unexpected calling on panel's early power-on, e.g. unexpected
touching on FPS, move this calling from case of interrupt received to
case of finger detected.
NO_PROP_NEEDED: This feature is only enabled on bo for now. If this
feature wants to be enabled on bq-shm2018, the cherry-pick should then
be done in the development stage of related products.
Change-Id: I8a24835a3b2c8acfdb3a4ed744501b9a7b67b8c4
Signed-off-by: chengql2 <chengql2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1706588
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
The goto statement needs to be enclosed by NVT_SENSOR_EN.
For devices where this is not defined, we have the following
build error:
+++++++++++++++++++++++++++++++++++++++++++
motorola/kernel/modules/drivers/input/touchscreen/nova_0flash_mmi/nt36xxx.c:2239:1: warning: label 'err_wakeup_source_register_failed' defined but not used [-Wunused-label]
error, forbidden warning: nt36xxx.c:2239
+++++++++++++++++++++++++++++++++++++++++++
NO_PROP_NEEDED: <only applies to bo branch>
Change-Id: Icecdcec4f169c30250c03a23006891ffb25c53bc
Reviewed-on: https://gerrit.mot.com/1705821
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
On latest 4.19 kernel update, wakeup_source_init API was removed.
So replacing it as follows:
- wakeup_source_init => wakeup_source_register
Also, ensure wake_source_register is compatible with all kernels.
NO_PROP_NEEDED: <only applies to bo>
Change-Id: Ic08fa612c3aa8adec0e2f485c9aa85e3a8eacdf1
Reviewed-on: https://gerrit.mot.com/1699262
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
On latest 4.19 kernel update, wakeup_source_init API was removed.
So, replacing it as follows:
- wakeup_source_init => wakeup_source_register
Also, ensure wake_source_register is compatible with all kernels.
NO_PROP_NEEDED: <only applies to bo>
Change-Id: I8f3b7a62c0b17456aba18400e00117507f9e1873
Reviewed-on: https://gerrit.mot.com/1699261
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
On latest 4.19 kernel update, wakeup_source_init and wake_source_trash APIs
were removed. So, replacing them as follows:
- wakeup_source_init => wakeup_source_register
- wakeup_source_trash => wakeup_source_unregister
Also, ensure wake_source_register is compatible with all kernels.
NO_PROP_NEEDED: <only applies to bo>
Change-Id: I35d73705252d23aedc2eb6b9ad4dcede0e451f35
Reviewed-on: https://gerrit.mot.com/1699260
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
Some API changed with Kernel 5.4 version
fix ST NFC driver compile error on Kernel 5.4
Change-Id: I1be44a5405907e4d2abdf26c2723302b3063ec29
Signed-off-by: Ningkai Zhuang <zhuangnk1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1702766
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zishang Zhou <zhouzs1@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Check for charge current over-adjust to the low side ignores the
flip battery condition. So add a check that the flip is not in over
current when deciding to bump the target charge_fcc to main target
This affects mainly h/w test case where main batt thermistor is set
to 25C but Flip batt thermistor is set to cold temp below 0C.
NO_PROP_NEEDED: dual charge control affects both Smith and Olson
This change applies to both products.
Change-Id: I2db7c568852d698951efb3a45e99db17e9b62de3
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1704030
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Start of charge in STEP_MAX case can overshoot charge current in
either flip or main batt. So shorten scheduled heartbeat wakeup
time to 750msec during overcurrent condition only.
NO_PROP_NEEDED: dual_charge_control affects both Smith and Olson
but this change will protect both products similarly.
Change-Id: Idb3356f9afbc9a2d402af1b759d3c04f65e7bf44
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1700177
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Postpone loading functions while firmware upgrade in progress. Otherwise
loading F54 fails and following function remove causes kernel to panic
Change-Id: I6f5f7ddf523fc33ccd2403f0963eba2a001df6c4
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1696371
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Fix pointer to null char constant comparison
+++++++++++++++++++++++++++++++++++++++
Build error:
motorola/kernel/modules/drivers/input/touchscreen/focaltech_0flash_mmi/focaltech_test/focaltech_test_ini.c:136:21: warning: comparing a pointer to a null character constant; did you mean to compare to NULL? [-Wpointer-compare]
error, forbidden warning: focaltech_test_ini.c:136
+++++++++++++++++++++++++++++++++++++++
Change-Id: Ie1c9bcb4497ba8c0aeff74c2aa9ebaa111bb806d
Reviewed-on: https://gerrit.mot.com/1687857
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Reviewed-by: Rafael Ortolan <rafones@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
TP:
Add support for USB detection based on touchscreen class in ft8756.
NO_PROP_NEEDED: <only needed for kiev in bo branch>
Change-Id: I94198558444620977ee90914347ffdb3c3360a01
Reviewed-on: https://gerrit.mot.com/1654275
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
If power supply supplier registered brfore touchscreen,
ps_notify_callback will not receive PSY_EVENT_PROP_ADDED
event, and will cause miss to set TP into charger state.
So check PS state in probe.
NO_PROP_NEEDED: <only needed for bo branch>
Change-Id: Ib2c190fe06bc9167a5e0108304e34389aa16ff5b
Reviewed-on: https://gerrit.mot.com/1685838
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Re-initialize via a watchdog failure instead of a general
i2c failure. This will allow us to recover from failures that
happen during init, and re-init. The current solution does not
account of the fact that init could fail, and if init fails
there l(CR) won't be an interrupt that will drive the i2c
read/write failure to cause a recovery.
This should also reduce false postives, such as if we failed
to read i2c while suspending/resuming.
Change-Id: If7579a90c6490d5f9c4fec4c0d3e7b74cb8bdcaa
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1690483
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
The state of health will provide a way to determine if a battery needs
to be replaced or not
NO_PROP_NEEDED: soh is only for TI FGs on Smith
Change-Id: I6281480033435d60b2e21ac81f093f1e09b51fca
Signed-off-by: Drew Abbott <drewa@motorola.com>
Reviewed-on: https://gerrit.mot.com/1690869
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
To proivde a sysfs node to reset hvdcp_power_max setting,
and rerun HVDCP process after that
Change-Id: I497a22d3e6974f27396595f894d868b55f4a80f0
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1686918
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
If we get an unexpected i2c failure, toggle the ldo
and re-init the registers after it is back online.
Change-Id: Ie17a208fb612264a6ddc8cb5fff16e3123b5719e
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1672836
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Factory agrees to manually reset FG'es rather than automatically
in BL factory bootmode, in addition to factory_build. This will
allow CFC test to charge batteries in COM and reboot with minimal
charge capacity variation compared to re-init'ing FG at every boot.
NO_PROP_NEEDED: TI FG for smith product only
Change-Id: I6f0b2ceaeff5d4c20b01e154b48f9c54e22a9ef0
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1689972
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Factory s/w currently forces FG resets at every power up, as well
as from sysfs cmd. The s/w build applied reset causes unstable soc
when batteries are charged prior and esp with high rate chargers
in backend COM test.
NO_PROP_NEEDED: TI FG specific to Smith product.
Change-Id: I7b8bc56efa113db465e8f4cc965ca7b064543ebe
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1687439
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
1. kiev use panel notifications, so DRM and FB notifications are
not used.
2. Kiev use touchscreen class to control the resume and suspend
process, so conmment out unused notifications.
Change-Id: Ied0266b821d797ea38080c0f9a2027ce2be7ead6
Reviewed-on: https://gerrit.mot.com/1683922
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
1. If there is a demand in the future, the touch screen class can add
some processing before reporting the touch events.
2. Output touch events for debugging
NO_PROP_NEEDED: <only for kiev in bo branch>
Change-Id: I1ad85bd86efc4799398530d30c6fe263e861e189
Reviewed-on: https://gerrit.mot.com/1683831
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
The golden profiles generated in TI tool does not account for Mot
custom chemistry setting. So we need to manually add dm element IDs
85, 84, 85, 108 to both FG gmfs files. Also increment dm ver to rev3.
NO_PROP_NEEDED: specific to only TI FG in smith.
Change-Id: Iba79bb27ddf7e3cd1007ca843d5a0092f275ca32
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1685703
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Updated wakeup_source API's need to be used for kernel_versions > 4.19.
Ensure to retain old wakeup_source API's for kernel_versions < 4.19.
ref.: https://gerrit.mot.com/#/c/1681553/
NO_PROP_NEEDED: applicable only to kernel_versions > 4.19
Change-Id: If7dc7924e584da29215b69027230856b0dc6e8c8
Reviewed-on: https://gerrit.mot.com/1685190
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Sergio Vilela <sv008@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
Tested-by: Sergio Vilela <sv008@motorola.com>
Reviewed-by: Ling Jin <lingjin@motorola.com>
Write all sequencer registers in one I2C transaction. Set WAVSEQ1
to 1 in vibrate function when it was not explicitly set
Change-Id: I24e13813bd97b6afb4436f91e79090ea6cb51a78
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1680232
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
