TP:
If tp gesture is not enabled, disable touch irq when suspend, and enable
it in resume
Change-Id: I1a0973206e0bcd81c3dd020538c357b7913ad142
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1436140
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Submit-Approved: Jira Key
TP:
Change sensor flag into on-change sensor.
one shot sensor can not work normal for TDDI panel
Change-Id: Ia1a99650e0885187fea6bbcfdc36d4e484c4e17a
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1435388
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianlin Nie <niejl1@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
TP:
Change sensor flag into on-change sensor.
one shot sensor can not work normal for TDDI panel
Change-Id: I0a33ad017b2a11e86f3f437009904678509a9f22
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1435389
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianlin Nie <niejl1@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Add an additional chip id 0x97 to match evt
part change.
Change-Id: I2660c0f2694a8f4d5c1e3933ba44e02fe9542d86
Signed-off-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-on: https://gerrit.mot.com/1432851
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
when in STEP FLOAT, charging will don't stop when current less than
charging iterm, so we add stop charging in STEP FLOAT.
Change-Id: I2c710dfd2b8026c57ca88a17b7d85cae7a241bbf
Signed-off-by: Haijian Ma <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/1430072
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For testing purposes and due to continuous hardware modifications,
some temperature values may provide incorrect values due to
thermistor positioning or calibration. Hence, performing runtime
temperature limitation sets for internal testing can avoid
unexpected behaviors, l(CR) charging speed limitations.
Change-Id: I5016cd2ddeb7c8c3afbeb1277a208dbc80853709
Signed-off-by: Cesar Santos <cmsantos@motorola.com>
Reviewed-on: https://gerrit.mot.com/1432920
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
CONFIG_SPECTRA_CAMERA has to be defined so that the
correct cci subdev is returned by cam_cci_get_subdev.
Change-Id: I98e4c8653fe50d88db58026509122261ce78fa9c
Reviewed-on: https://gerrit.mot.com/1428309
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
cherry-pick from (CR)
Goodix FOD driver is used for Goodix G5-GW9608
Fingerprint Over Display (FOD) sensor.
Change-Id: I31a45ec4239d63bcc520013e63ba7da1c900fb85
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/1402926
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Touch power supplies AVDD and IOVDD might not be always on and then
kernel driver needs to vote for them. Adding optional handling for
avdd and iovdd. Both power supplies can be configured in device tree
Change-Id: I9e22a4e1fe18c9d1e36defe7c98ce6c3852b722b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1428943
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
- (CR): focaltech_0flash_mmi: set deep sleep when predict failed
- (CR): focaltech_0flash_mmi: set reset pin to 0 if vio is close
- Release all fingers when resume
Change-Id: Ia6b8169d560951c3407a8c2b28b2d21d071bf710
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1427799
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
TP:
When gesture is on, LCD need use different suspend command.
Return specific value to LCD to tell current gesture state.
Change-Id: I79e57f448d38d1077f86748d2cacf88e3a74b4e0
Signed-off-by: haojl2 <haojl2@motorola.com>
(cherry picked from commit aa605c8d93b9c8258ad3e2133894330aa7f99713)
Change-Id: I79e57f448d38d1077f86748d2cacf88e3a74b4e0
Reviewed-on: https://gerrit.mot.com/1426753
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Submit-Approved: Jira Key
Adding regulator driver for the device Dialog SLG51000.
The SLG51000 device contains seven compact and customizable low
dropout regulators and is designed for high performance camera modules
and other small multi-rail applications.
Change-Id: I871afe5c6b2f9e32e73696519983db33b04feeb6
Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ravi Vembu <raviv@motorola.com>
Mot-CRs-Fixed: (CR)
Change-Id: I871afe5c6b2f9e32e73696519983db33b04feeb6
Reviewed-on: https://gerrit.mot.com/1412454
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Rav(CR) Vembu <raviv@motorola.com>
Submit-Approved: Jira Key
When the power state is changing, which causes the USB plug to be mistaken,
and the sar sensor is calibrated.
Change-Id: Ia844dd891bc1301c7fa2f73617db92ccbdb6a435
Signed-off-by: huangjq9 <huangjq9@motorola.com>
Reviewed-on: https://gerrit.mot.com/1426418
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jiacheng Ou <oujc1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Enforcing SW reset on resume. Type of reset can be configured via device
tree option sec,reset-on-resume, which now accepts an argument. Type 1
correspods to HW and 2 to SW reset.
Change-Id: I751cfbe1d19a9e583def7e7889ee914a999bd542
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1425966
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
TP:
Moto TP FW upload script is not bringuped for this driver.
So set firmware name in dtsi for racer lite.
Change-Id: Ia65ddf142e01c08448e23e88ae8116e623c18ac1
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1426485
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
TP:
Moto TP FW upload script is not bringuped for this driver.
So update FW automatically when bootup.
Change-Id: Iabc14f37f0207bd535f25e02574ef9eefae8b358
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1426462
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Two function registers address form PM660 are different
with other PMICs:
PM660:
1341: USB_CMD_ICL_OVERRIDE
160B: POWER_PATH_STATUS_REGS
Other PMICs:
1342: USB_CMD_ICL_OVERRIDE
110B: POWER_PATH_STATUS_REGS
Change-Id: If1c2bcacf498281bf1b4156b65021e9b83c44041
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1426165
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Make sure all charger detection code only executed when option is
enabled in device tree.
Change-Id: I1f195947313a874d534d8ea89833c17ec4ee6ee6
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1424713
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
1. Support to call different seq wave on haptic.bin
and make it as an dts option "vib_ram_config"
2. Update some patch from vendor.
Change-Id: I0381fe51fa3389eaba67a897d461b72ee42d7e0d
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1422693
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
TP:
If dtsi set cfg filename, use this value instead of default filename.
Change-Id: Ifc4482a8bfa90e173b3b3360a5f3b480d259c41e
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1422709
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Set Sofia FPS position as 0
Set Rav FPS position as 0
Change-Id: Icaa06e6e8443d7a672d372Montana0798fec4bdceceb
Reviewed-on: https://gerrit.mot.com/1423235
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
himax_v2_mmi:
Use /chosen/mmi,panel_name to support compatibility for different
panels, use different touch firmware and test csv.
Change-Id: Id60f9af95e075e83a8d1121cda22f5c98a8a7132
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1422872
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
For support double tap gesture based on touch,
add type definition for virtual sensor 'double tap'.
Change-Id: I16e88e951946d89cf2ceb7885852972bfb01e59c
Reviewed-on: https://gerrit.mot.com/1422623
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When touch IC kept in LPM, it's imperative VCI and VIO power supplies
stay on. Driver won't turn power supplies off whenever touch IC is
supposed to stay in LPM. Will use splash screen mode flag to trigger
this behavior.
Change-Id: I07b5758fc31fb6a814ec41d70c40c5044cc55fd8
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1420815
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
Change the vibrator work freqency as a dts option to
make different project can configurate different vibrator.
Change-Id: I1af4361249f507d6904054e9cdf9b88a55ea8ff1
Signed-off-by: Weilong Wu <wuwl10@motorola.com>
Reviewed-on: https://gerrit.mot.com/1421150
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Enable the macro of USB_CAL,
sar-sensor will be calibrated when USB plug.
Change-Id: Ib95e9a55801a39b85021a64ac57bbc1a170db4fe
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1420260
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wen Xie <xiewen3@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
1.disable smart pa irq pin pullup
- for smart pa irq pin, need defalut pullup
- currently,smart pa internal pull up and ap side donot pull up.
- it is ok for smart pa interrupt,but because gpio 100 is for boot config
- pin,so when warm reset, smart pa internal pull up will cause to
- enter 9008,no ramdump.
- change to ap side irq pin pullup,and ti2558 do not internal pullup.
2.fix right speaker no interrupt.
Change-Id: I823c10d7354c4a37014d879542fc2c7937600996
Signed-off-by: liaohj <liaohj@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1418606
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wanlong Zhou <zhouwl@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Sleep and force update patches should be allocated once regardless
how many instances of the driver running.
Change-Id: I94262d172780740c5cb571de6ece8d9fcface618
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1418308
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
