Flush target_if response timers for vdev for given psoc. This API
used to flush target_if response timers for vdev while wlan driver
shutdown.
Change-Id: I1700893cdf0b0eb9d3419505c88c71fc86da0dab
CRs-Fixed: 2529284
In case vdev is logically deleted the serialization active timer fails
to start because it fails to get vdev ref count. Now in this case the
cmd is not removed from the active queue and is just marked
CMD_ACTIVE_MARKED_FOR_REMOVAL because CMD_MARKED_FOR_ACTIVATION is set.
Even during pdev stop as CMD_MARKED_FOR_ACTIVATION is set the command is
not removed.
Fix is to reset CMD_MARKED_FOR_ACTIVATION flag and handle it in same way
as the activate failure case.
Also reset the timer cmd after timer start failure to avoid vdev ref count
release by WLAN_SERIALIZATION_ID even when it failed to take the ref count
in first place.
Change-Id: Ic078efa8ce4ad563087381b8c95eba91894d8a48
CRs-Fixed: 2535245
Log level of some expected prints were set to error level because
of which the prints were coming frequently.
Moving log level of these expected prints from error to debug level.
Change-Id: Ifd2672cd73db02488ce3055ca5e35d423d4f4761
CRs-Fixed: 2522164
When NO_RX_PKT_HDR_TLV is disabled, host gets the 802.11 header from the
RX packet header TLV (rx_pkt_hdr_tlv). When this macro is enabled, host
gets the 802.11 header from the raw data frame.
In case of MIC failure, host receives the decaped frame. This decaped
buffer does not have 802.11 header. Upper layer uses receiver and
transmitter address to process MIC failure. Therefore, get the RA and TA
address from rx_mpdu_start_tlv and passed it to upper layer.
Change-Id: Id5631051892d2e1b38b7833a0599fdc49ca2f6b7
CRs-Fixed: 2525613
Currently, FW has TTL of 5 sec for management frames, if a frame
is queued just before logical deletion, it takes max 5 sec to complete,
by considering other latencies, increaseing it to 8 sec.
Change-Id: I6861d9557489bcf10e60ff32d06e88be23535d48
CRs-Fixed: 2526239
Add the API wlan_reg_get_band_channel_list, to get the channel list from
the current channel list based on the input bandmask provided.
The bandmask may have more than one bands as input.
Change-Id: I082a5dd6a9ddb449d64d13e636f42ad58d2de16b
CRs-Fixed: 2523254
VLAN LLC frames were dropped, instead these frames
are now given to stack for further processing.
Change-Id: Icaffc2e4755036fca0e2f606e29b41c58364e329
CRs-Fixed: 2508086
Add parameter to know if MBSS feature is enabled or disabled.
During 'wifi detect', the wireless config file is changed and
there's no way to figure out status of MBSS feature.
Change-Id: Ie56244097fd15efc71213f23e5afcb57188c9386
CRs-fixed: 2531506
Agile DFS support depends on the Firmware's aDFS support. This
information is propagated to the HOST in the WMI ready event as a flag.
This flag was not used by HOST before enabling agile DFS which resulted
in preCAC being enabled for the FW that does not support them.
Also, for certain chainmask configurations, aDFS should be enabled
only if the current pdev is operating in non 160 BW.
Introduce two new flags in the DFS object:
1. dfs_fw_adfs_support_160
2. dfs_fw_adfs_support_non_160
which specify FW support for ADFS for pdevs in 160 BW and non 160 BW
respectively. Make appropriate changes in is_agile_precac_enabled
check that includes fw support for the current operating bandwidth.
Also rename "dfs_agile_precac_enable" to "dfs_agile_precac_ucfg" and
"dfs_precac_enable" to dfs_legacy_precac_ucfg" in the dfs structure
to properly indicate what those booleans represent.
Change-Id: I202ead8ef109c707bfbda488064ecaa72a3f737f
CRs-Fixed: 2521654
Reject Agile Spectral start scan request from user
space if Agile DFS is running on one of the pdev.
CRs-Fixed: 2517517
Change-Id: If648c53946d1bca1de07a335db67f204de41ba5f
Check whether Agile span overlaps with the current
operating span. This check is done at the time of
start scan and Spectral parameter setting.
CRs-Fixed: 2521554
Change-Id: I9f28ca0a02bd5abf6acdff89301a0c9343e34887
There is compilation issue about dbr_get_pdev_and_srng_id on hasting
platform, fix it in this change.
Change-Id: Icd5612c31341e6a5f71c65f1ec10533c164798c3
CRs-Fixed: 2530729
Add new DFS filters to ETSI RADAR table to detect ETSI EN302502
Type 3 and Type 4 RADAR pulses.
The filters have been added per ETSI EN302502 spec
https://www.etsi.org/deliver/etsi_en/302500_302599
/302502/01.02.01_60/en_302502v010201p.pdf
Table D.3.1: DFS Test Signals simulating fixed frequency radars.
Change-Id: I4b9e93dc5069d57992c468cd4c00cb5ff77d3753
CRs-Fixed: 2505394
In direct buffer rx component, it required to pdev id and mod id match
at same time, so use new pdev id conversion backup and convert pdev id
actually.
Change-Id: If53bde84564becd91f2dd0e20b002da2961dccd2
CRs-Fixed: 2528401
While checking if ETSI preCAC is already done on a given channel
in the API "dfs_is_etsi_precac_done", dfs_curchan is always used as
the channel to be checked. Since the API "dfs_is_cac_required" maybe
called without updating the dfs_curchan, using dfs_curchan in
function "dfs_is_etsi_precac_done" is not correct.
Use the current channel provided to the API "dfs_is_cac_required"
as input while checking for ETSI preCAC.
Change-Id: Id2bc59281e17afaa3ba7572f5a2d7bd4718a7639
CRs-Fixed: 2528023
This is a propagation of qcacld-2.0 commit 98821c7dcf49d ("qcacld-2.0:
Add CONFIG_MULTI_IF_LOG to support multi if log"). Add CONFIG_MULTI_IF_LOG
to support multi if log by assigning the specific netlink protocol
when dual wlan cards are loaded.
Change-Id: I827fbd46893c47ed2d9b123bf753c06b2e115fbb
CRs-Fixed: 2525488
Add support for WMI over QMI to reduce power consumption for
periodic stats report.
Change-Id: Ic57b2bd18be803c97ffeea2e0073751d31e02202
CRs-fixed: 2521835
Currently extscan vendor config params are defined under
EXTSCAN feature flag but are getting used for the vendor command
get valid channel list which is independent of EXTSCAN feature.
To resolve above issue move extscan vendor params out of
extscan feature flag.
Change-Id: I049fbc8cdc97f51aa1e390a488074572d5276299
CRs-fixed: 2524535
This reverts Change-Id: I6dd3abd61730d8f17d74a11a42978a64853136e5.
wmi_pdev_stats_v2 and wmi_pdev_stats_v1 are defined depends on
specific target, can’t use them directly in our common code,
must use wmi_pdev_stats instead. And use different config to
enable v1 or v2 pdev stats.
Change-Id: I6ad11d723ac0c9ed55a266c204957af706045d3d
CRs-Fixed: 2521638
Currently as part of tdls enable link, If the peer is buff
capable or tdls uapsd is enabled in INI. UAPSD is enabled in
FW. Avoid sending this command to FW as it effects the behavior
with AP.
Change-Id: Idc023cb9de3ab63e7643815d473fe0efa98069b9
CRs-Fixed: 2528324
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As a part of above requirement, in the existing WMI interface handlers
and related functions, wherever missing, add frequency attributes to
identify unique channel operation.
Change-Id: I7c7542aa8488b4c55764c733590b77c64c397029
CRs-Fixed: 2517900
It required to support multiple srng per module in direct buffer rx
component.So extend the array "dbr_mod_param" in dbr pdev object and
let it to support two more srngs per module.
Change-Id: Ia2c649dacc3787cdc13b06f0b22c1c175fb451cc
CRs-Fixed: 2523365
EXT2 event carries the dma_ring_caps info.Necessary
support to process the same is being provided.
Change-Id: Id8ef1840470b272db00fa5e8f98d1fe9dc273a7e
vendor_roam_score_algorithm is added in order to
enable/disable roam score algorithm.
With this roam score Algorithm, AP score will be calculated
based on below equation:
AP Score = (RSSIfactor * rssiweight(0.65)) +
(CUfactor *cuweight(0.35))
Add vendor_roam_score_algorithm inside scoring_param
and inside function send_roam_scan_offload_ap_profile_cmd_tlv
populate score_param->vendor_roam_score_algorithm_id
from ap profile.
Change-Id: I21bb788d96a34c3bf237f0d304e51a7f4664d2ee
CRs-Fixed: 2517492
The serialization vdev destroy handlers extracts the psoc
from the vdev, and get its psoc component object.
If the pdev or psoc is NULL for some reason, we get a
crash in object manager while trying to retrieve the serialization
psoc object.
So check for valid pdev/psoc before we get the serialization psoc object.
Change-Id: I9ca45654250403a8b5fe674431251defd1aac6e8
CRs-Fixed: 2524231
When the radio is in HT20 mode, the duration of Korea Type 3 RADAR is
reported by the HW as 3us although the duration is only 1us. The minimum
and maximum duration for the corresponding filter(FilterID 42) is 0us
and 2us respectively. So host will neglect the pulses with a duration of
3us. This will result in Host failing to detect the Korea Type 3 RADAR
pulses in HT20 mode.
Increase the maximum duration of the filter(FilterID 42) to 3us.
Change-Id: I45f337ec31e017c4a0c19f1afea3fc7a08af9888
CRs-Fixed: 2503942
Add IOMMU IOVA to PA and MMU virtual to phys address
in CE Desc History, hif_ce_desc_history.
Change-Id: I877a2275e7ea99748087ea6f2ad5f26aa3b2476e
CRs-Fixed: 2524381
During SSR in dp_vdev_flush_peers function, the else condition finds peers
to delete by calling dp_peer_find_by_id. If the delete_in_progress_ flag
has already been set to TRUE, then dp_peer_find_by_id will return NULL
and not delete the vdev object. Calling __dp_peer_find_by_id will always
return peer id so all peers are sure to be deleted.
Change-Id: I86bf2bdda7ebc5a9c2f4bbc877392ebff9cbaf59
CRs-Fixed: 2513104
The IEEE channel numbers in the 6GHz band overlap with the
IEEE channel numbers in 2.4GHz, 4.9GHz (e.g. Channel number 1) and 5GHz
(e.g. Channel number 149). Currently many APIs in the regulatory
component, have channel number as a parameter. This leads to the channel
number collision.
To overcome this, new APIs with channel center frequency ( in units of
megahertz or MHz) as a parameter are created, as a channel center center
frequency is unique for 2.4 GHz, 4.9 GHz, 5GHz, and 6GHz channels.
Each new API performs the same function as its old counterpart.
For example reg_set_5g_channel_params() and
reg_set_5g_channel_params_for_freq perform the same operation. The
difference in the latter, is that the channel center frequency is given
as an input parameter instead of IEEE channel number, and the function
body is modified to suit channel center frequency.
The new channel frequency based APIs are placed under the macro
"CONFIG_CHAN_FREQ_API" and the existing channel number based APIs are
placed under the macro "CONFIG_CHAN_NUM_API". The APIs under the macro
CONFIG_CHAN_NUM_API can be removed, when when all the references to
the APIs are removed.
Change-Id: I0347e8d31c25e2c3a406aafe1360c7c7b602fda2
CRs-Fixed: 2463009
Remove channel_map_old and and remove the instances of
CONFIG_LEGACY_CHAN_ENUM in the dfs and regulatory component.
Change-Id: I3e30dba72c28c9c356648595ad96720ab0cd789a
CRs-Fixed: 2463009
This is needed, because in SAP mode wlan_wake_irq is not used to wake up
the APPS when it goes to suspend, and each SRNG interrupt needs to
wakeup the APPS when needed. Hence mark DP interrupts with
IRQF_NO_SUSPEND flag.
Change-Id: I0138c94ad82da7cdef5856c15c5f4089a835bc22
CRs-Fixed: 2512383
The pktlog will fail with ROME module due to the change IDs:
I24776caa3b78ec38d94421f243ec72d81ee3102d
Ifb70ac0993f2402201f88758845f730cf677b1a0
Define new macro PKTLOG_LEGACY for HELIUM/ROME to avoid the ROME PKTLOG
failure.
Change-Id: Ibaa20b7af208a261e0fd8682de45ad8eb4a69212
CRs-Fixed: 2523511
*For QCN7605 do not call usb_get_dev/usb_put_dev as its already called
in CNSS.
*Also for QCN7605 do not disable lpm in hif_usb_disable_bus().
This was a workaround done for Rome/Naples which is not needed for
QCN7605.
Change-Id: Ibb151390590f85a96ad83395420b08aee1be15ef
CRs-Fixed: 2516667
Disable PN error handling in REO Queue descriptor setup.
This is different from pn check enable.
When PN error handling is enabled, if a PN check fails
REO queue descriptor sets pn_error_detected,
All the subsequent packets will be exceptioned with REO error code 13
till SW resets the pn_error_detected.
SW is not doing any special handling when PN error handling is enabled
Hence disabling flag in setup time instead of resetting/updating
reo queue descriptor as update is an uncessary overhead.
Change-Id: I21e40b6f685e50630fcc4413f6cd27e5ed9ff66d
Degrade log level from INFO to INFO_HIGH in function dp_get_vdevid,
this is to prevent console log output which may impact spinlock lock
/unlock time.
Change-Id: Ic1ecb2f0e2c5fcf5d15766921326a8cd80e67103
CRs-Fixed: 2522041
Since callers who log runtime PM resume source may be invoked within
spinlocks or in other atomic contexts, log using info level will log
to console as well which may result overhead. Log using debug level
which will be logged to buffer only to avoid such issues.
Change-Id: I0497c7b7528200af9a34d816865e9bbbfd8bacf2
CRs-fixed: 2518800
Peer rssi is updated with the rssi measured on primary 20 and
not on the entire bandwidth.
Scale the peer rssi value by packet bandwidth offset.
Packet bandwidth offset for packet bandwidth of 20/40/80/160 is
0/3/6/9 dB.
Change-Id: I13eb8c17ec9828c0025d6b3a92a8b26b971268a1
CRs-Fixed: 2518598
