HDD currently requests SME_GLOBAL_CLASSB_STATS in a few of its legacy
ioctl handlers. However these stats were specific to the WDI firmware
API used by older generations of hardware, and this interface is not
supported by WMI. In addition HDD doesn't actually do anything with
the data returned. So remove support for these stats from HDD.
Change-Id: I97acf231cfffba630aa6a9ac98d3b8298fb8b7d7
CRs-Fixed: 2021531
SME currently has legacy code to support the tCsrGlobalClassCStatsInfo
data structure. However these stats were specific to the WDI firmware
API used by older generations of hardware, and this interface is not
supported by WMI. In addition the support for these stats has been
removed from HDD. So remove support for these stats from SME.
Change-Id: I3e63f99e1dd1b509694e3953490355b4c23f6c73
CRs-Fixed: 2021528
WMA currently has legacy code to support the tCsrGlobalClassCStatsInfo
data structure. However these stats were specific to the WDI firmware
API used by older generations of hardware, and this interface is not
supported by WMI. In addition the support for these stats has been
removed from HDD. So remove support for these stats from WMA.
Change-Id: I0614ed2660c886c7e61b0e87058a2f2e522580f3
CRs-Fixed: 2021526
HDD currently requests SME_GLOBAL_CLASSC_STATS in a few of its legacy
ioctl handlers. However these stats were specific to the WDI firmware
API used by older generations of hardware, and this interface is not
supported by WMI. In addition HDD doesn't actually do anything with
the data returned. So remove support for these stats from HDD.
Change-Id: I846aacb7076f29199bd4d3bbce4ca0654565f2ef
CRs-Fixed: 2021523
The qcacld-3.0 driver inherited the tCsrGlobalClassAStatsInfo data
structure from a prior version of the driver. This structure was based
upon the WDI firmware API used by older generations of hardware, and
this interface is not directly supported by the WMI interface used by
current generations of firmware. However "glue" code was introduced
which converts between the WMI data and this WDI-based representation.
When the glue code was introduced there were some parameters which
were supported by WDI but not WMI, and there were some parameters
which were supported by WMI but not WDI. Rather than remove the fields
for parameters not supported by WMI and add new fields for the
parameters only supported by WMI, for some reason the existing
WDI-only fields were repurposed. This fact is captured in WMA:
/* rx_frag_cnt and promiscuous_rx_frag_cnt
* parameter is currently not used. lets use the
* same parameter to hold the nss value and mcs
* rate flags */
classa_stats->rx_frag_cnt = node->nss;
classa_stats->promiscuous_rx_frag_cnt = mcsRateFlags;
And leads to nonsense code such as the following in HDD:
nss = pAdapter->hdd_stats.ClassA_stat.rx_frag_cnt;
rate_flags = pAdapter->hdd_stats.ClassA_stat.promiscuous_rx_frag_cnt;
Rename these fields so that they match the data they hold, and remove
other legacy fields which are unused.
Change-Id: If04a8943ad90d796968c817ff5e634eec23c97f0
CRs-Fixed: 2021520
Add changes for 11ax peer association.
Add support for the following
- update data structures to hold HE capabilities
- setting up HE capabilities in the session
- updating sta context with correct HE config
- intersecting self and peer capabilities
- update derivation of peer phymode to handle 11ax phymode
Change-Id: I46c7a7328d09e74bc0c5b25a67f6273d7eb04d30
CRs-Fixed: 1073481
Introduce a new iwpriv command txrx_stats to
print both host and firmware stats for Lithium
chipset
Change-Id: If37b798a117446e9fbb369823977fa312872ed48
CRs-Fixed: 2017426
Change Kbuild to compile in new WIFI_POS component and
route all WIFI_POS OEM request to new component.
Change-Id: Ib0980348d6e50e27de0b5ad859ac378bf983b665
CRs-Fixed: 2003488
Add changes to update fine time measurement capability in WIFI POS
private object using vendor command.
Change-Id: I7e3b502660b169f4cdb654cb5f433446a24d2421
CRs-Fixed: 2003488
Add new dot11mode and update the utility functions to derive
the dot11mode based on the userspace config, INI config and
FW capability.
Change-Id: I5780120ef7bc2b78fd596e937fe14a2c8ad88348
CRs-Fixed: 1073481
Host triggers firmware recovery when bug is reported for no
or zero scan results. This may trigger false alarm and thus
firmware recovery even in no wifi zones.
Fix is to set recovery needed to false in cds_flush_logs
called from scan done callback. Also change flush
completion log to info.
Change-Id: I45cf616803d3f504649fb0fa8e4698b781be5781
CRs-Fixed: 2008108
qcacld-2.0 to qcacld-3.0 propagation
When extending the RoC for off channel tx, the cookie of of the RoC
is changed to action cookie so that RoC request and off channel tx
mapped to same tx frame. Indicate roc expire event to the supplicant
for the RoC request before updating the RoC cookie with action cookie.
Change-Id: I66896dd1e98d83b92d4f1e60c7057acd80743929
CRs-Fixed: 2002054
This change includes to remove redundant MRACE logs
which are seen very frequent in MTRACE dumps and
remove multiple definition of WMA_SET_TX_POWER_REQ.
Change-Id: Ic5ac780ba3d31a8f2c6e4c10f7af5051864e7f3e
CRs-Fixed: 2020491
qcacld-2.0 to qcacld-3.0 propagation
Observed kernel panic due to improper arguments passed to kernel bit
manipulation functions (like set_bit, clear_bit etc.) i.e these
functions expects bit positions as its first argument but bit mask
values are being passed.
To fix these issues ensure below points:
- Pass bit position as a first argument to bit manipulation
functions.
- Re-define MACROs which gives false impression of bit mask values
with their naming convention.
Change-Id: Ief8cd83b05f01a0926f91c0e9fb461ddd498e05e
CRs-Fixed: 981050
SBS is always set to true by the policy manager. so for the second
connection, if the mode is not DBS, then SBS HW mode is selected.
Since SBS is not supported the second connection fails with invalid
HW mode error.
Change-Id: I817e83cbac194cdfde73a586491d645631692f12
CRs-Fixed: 2021512
SME currently has legacy code to support the tCsrPerStaStatsInfo data
structure. However these stats were specific to the WDI firmware API
used by older generations of hardware, and this interface is not
supported by WMI. In addition the support for these stats has been
removed from HDD. So remove support for these stats from SME.
Change-Id: Ibab7f94764c68933633c46da497613add0824ff1
CRs-Fixed: 2020067
WMA currently has legacy code to support the tCsrPerStaStatsInfo data
structure. However these stats were specific to the WDI firmware API
used by older generations of hardware, and this interface is not
supported by WMI. In addition the support for these stats has been
removed from HDD. So remove support for these stats from WMA.
Change-Id: I42ba6535ccfaed99df46d389cbb8ddd9d0f9261b
CRs-Fixed: 2020066
HDD currently requests SME_PER_STA_STATS in a few of its legacy ioctl
handlers. However these stats were specific to the WDI firmware API
used by older generations of hardware, and this interface is not
supported by WMI. In addition HDD doesn't actually do anything with
the data returned. So remove support for these stats from HDD.
Change-Id: I070685a0ca2b9c53b93c1f950eab97ea65f43f1e
CRs-Fixed: 2020065
Currently wma_get_stats_rsp_buf() uses a loop to determine which mask
bits are set, and based upon the loop iteration count it determines
the size of the associated buffer. This calculation is fragile,
however, in that it tightly couples the loop iteration count and
eCsrRoamStatsClassTypes enumeration values. Since code under
development will be removing some of the eCsrRoamStatsClassTypes
enumerations, update this logic to remove the tight coupling.
Change-Id: Ia6cda4c8181c44d25a9da27acffe6bd10ca3b4ed
CRs-Fixed: 2020056
Currently SME exposes a set of SME_*_STATS macros to indicate which
stats are of interest in a call to sme_get_statistics().
What is not obvious is that the values of these macros are required to
be aligned with the eCsrRoamStatsClassTypes enumerated values. Update
the macros to make that alignment explicit.
Change-Id: Id992a8230a1aa4df941ea7666bc00a661a9ab68e
CRs-Fixed: 2020055
This change addresses sending Deauth to TDLS peers,
delete TDLS stations and clear hdd structures if
concurrency is detected.
Change-Id: Ia9f6724a9db20c6d9ebfc2fa735569305f35f084
CRs-Fixed: 2022489
Change it since WLAN_P2P_ENABLE easily confused with existed macro
WLAN_FEATURE_P2P. This is the change in Kbuild.
Change-Id: I571cb4c6e8e2b2d185811e1103a8990eb9d4b01d
CRs-Fixed: 2021997
qcacld-2.0 to qcacld-3.0 propagation
The parse_mac_trace.cmm file will be maintained
under core/mac/src/sys/legacy/src/utils/src/.
This script helps to decode MTRACE logs when we get crash dumps.
Change-Id: I421b53edc18c49e737411d3723b0a1536e86bc58
CRs-fixed: 957900
Excessive logging of the following error message was observed:
__wlan_hdd_cfg80211_scan: Update scan IEs with default Scan IEs failed
This message was being printed because wlan_hdd_update_scan_ies()
returns an error code when no default scan IEs have been configured.
But this is a valid scenario, so modify wlan_hdd_update_scan_ies()
to return success (0) when no default IEs have been configured.
Change-Id: I4b9dc1d38d38d326861b7c95d13b891cb0d0c522
CRs-Fixed: 2013531
Add ini param qdf_trace_enable_wifi_pos to control WIFI_POS logging
level from config.ini
Change-Id: I9baa59448b9badaae94193bd7367a104309d0a1a
CRs-Fixed: 2003488
This API is moved to qcacmn as part of WIFI_POS convergence.
Remove this API from MCL code include necessary header file
for API.
Change-Id: I8622d0bbfd90c7aee5630aaa3e6e3540dfc9df9b
CRs-Fixed: 2003488
Change the return type to QDF_STATUS of htt_tx_desc_init function
to handle dma map and other error condition.
Free the tx descriptor if this function returns error.
CRs-Fixed: 2021634
Change-Id: Ib9154de308154c43c202ad8a88ecdfff04be47a2
