Adds logic to use default RSN IE fields if optional fields are not
present in IE. So if RSN IE doesn't contain AKM, group and unicast
cipher use the default AKM(AKM_IEEE8021X) and cipher (CCMP).
Change-Id: I8e9737aea15322e43d2d954d046f5b2ac9b21af1
CRs-Fixed: 2164528
In some use cases invalid phy mode is sent to the firmware
and it bring down the system.
Validate the phymode in all cases, before send to the
to firmware
Change-Id: I01d7fa833304967ff742d24bce814819079ecc68
CRs-fixed: 2167366
The Linux kernel version 4.12 introduced an API change to
nla_parse_nested(). Add conditional compilation to call
nla_parse_nested with the correct parameters based on the
version of the linux kernel being compiled against.
Change-Id: I5214e9622d63ec928f5814f5840528f8c0d61422
CRs-Fixed: 2167853
In Api csr_prepare_scan_filter , set bss_scoring_required
for only STA mode to sort the APs according to the
scoring logic applied to Aps in scan results .
Change-Id: Id85b046d3d4c9c54db928ad689418efc963303f8
CRs-Fixed: 2165464
Do not set the listen interval with DTIM value while processing
the connected AP beacon. Host processes the connected AP beacon
only when device in non WOW mode and FW expects the listen
interval to be always 1 when device is in non WOW mode hence
do not set listen interval with connected AP's DTIM value
Change-Id: I8a1bce1010ba271efdd1d7b8572e06d7c3693e07
CRs-Fixed: 2164690
Advertise the min of self TxBF CSN and APs TxBF CSN value to
fix the IOT issue with the AP.
Change-Id: Ifa2872ef62925f99bf49ef504ade4a4bb431672b
CRs-Fixed: 2158667
80211 mode information is not getting filled correctly,
fill correct 802.11 mode information.
Change-Id: I7013db95c5010bdaac1f84209534f63d6c7f5719
CRs-Fixed: 2133109
The application layer (framework) should take care the
dnbs state transition on each intf.
Driver does not maintain the dnbs set/unset counting.
Remove the "restrict_offchannel_cnt" from driver.
Change-Id: I8b70a10f187f2d34397a301f08b4bd1dafb02989
CRs-Fixed: 2164827
HE caps and HE op IE are derived in driver and also sent from
hostapd as part of additional IE. additional IEs are appended at
end of the beacon frame hence the duplicate IEs are observed.
Strip out the HE caps and HE op IE from additional IE after the
IEs are derived in driver.
Change-Id: Ia11b16ef8e7d376e5c1ef44d54e1cd1885f5b842
CRs-Fixed: 2159867
Enable 64-bit htt rx addr tracking based on HTT_PADDR64
when ENABLE_DEBUG_ADDRESS_MARKING is disabled.
CRs-Fixed: 2166963
Change-Id: I47cfcb3f082bc969cd27630cfd96eb53b31cc40d
Currently there is no locking mechanism to protect global
variable ll_stats.result in hdd_debugfs_stats_update api and
wlan_hdd_llstats_free_buf api so if two threads access the file
simultaneously there is a possibility of use after free of the
llstats buffer.
To address this issue add a mutex to prevent the simultaneous
access of the llstats buffer.
Change-Id: I0fd418e3a2034f10ba45021af21920f5e133cb6e
CRs-Fixed: 2157283
Change some mgmt txrx component related API signatures to have pdev
instead of psoc.
Change-Id: I6dc250757c2f686e6f38bcb5fdc752717242b606
CRs-Fixed: 2146871
During disconnection process, cache disconnecting STA information
so that the same information is updated to upper-layer on receiving
GET_STATION vendor command, after disconnection.
Change-Id: I2e5a0be42d81b86e6f4490de1bdf9d7e0797506d
CRs-Fixed: 2126182
While preparing the RSNIE caps only AP capability are considered.
The capability should be intersection of user provided capability
and AP's capability.
So use intersection of AP's and user's RSN cap in assoc request
Change-Id: I585d84953767c217239eedc284d6b413cf7af5e4
CRs-Fixed: 2164525
1) Change some of the parameters for the following two functions
to reflect the right PHY mode definitions at different layers:
wlan_hdd_set_acs_ch_range
sap_select_default_oper_chan
2) Refine the kernel-doc for the above 2 functions due to their
parameter changes.
3) Use eCsrPhyMode instead of uint32_t to define hw_mode in
struct sap_acs_cfg to reflect the right PHY mode definition.
4) Refine the ACS code logic due to the changes introduced above.
Change-Id: I91b7814831a05265cfff456452eef0fe2ef97d1e
CRs-Fixed: 2167355
Fix clang warning implicit conversion from enumeration type
'tSirResultCodes' (aka 'enum eSirResultCodes') to different
enumeration type 'enum nl80211_timeout_reason' [-Wenum-conversion]
Change-Id: I50cc36d647826b9ce904c6cf8fe25e44dcdf90dc
CRs-Fixed: 2167852
In many cases, iface ptr value cannot be NULL. Remove the
un-necessary check iface ptr value.
Change-Id: Ic7430dd2a5e660daf08b007cbc9f0fcedad7ef01
CRS-Fixed: 2162236
Do Not allow __wlan_hdd_cfg80211_get_nud_stats and
__wlan_hdd_cfg80211_set_nud_stats commands for FTM mode.
CRs-fixed: 2161387
Change-Id: I135cead506c741425845d9e000d9a868e4a7779a
When invoke pe_enable/pe_disable,scheduler is running.
There will be two threads operate lim resource at same time.
Most of lim resource should be initialized/freed in pe_open/close
to avoid race condition.
So:
- Move lim_cleanup to pe_close.
- Move lim_initialize to pe_open.
- lim_start,__lim_init_config,lim_register_hal_ind_call_back
stay on pe_start
- lim_cleanup_mlm stay on pe_stop
Change-Id: Ib647174ee9e1cf82567223abca233cb0332f1ffb
CRs-Fixed: 2154978
In the stress test of insmod/rmmod, the object of psoc might fail
to be initialized during initialization. For such case, recovery
process should not be triggered in the de-init process.
Add check for psoc to avoid false alarm.
Change-Id: I71f9eed8596958788f6a3213e7a3bcd9ee346781
CRs-Fixed: 2165620
1) Local peer ID freeing is currently done before peer ref count
decreasing and peer releasing, which imposes a potential race
condition, in which the same local peer ID map will be accessed
before the peer object is fully released.
Fix the issue by relocating the local peer ID freeing to the
point where the peer object is to be freed.
2) Add changes to the return value description of function
ol_txrx_peer_release_ref
Change-Id: Id7722bd54afd6110b91634ca7f1632cade766704
CRs-Fixed: 2155759
Historically, OL peers were forcibly destroyed during pdev detach. This
logic was mistakenly removed as part of another change. This led to peer
leaks during Sub-System Restart (SSR). Restore the peer delete logic to
close peer leaks during SSR.
Change-Id: I72d980750a2f97e6717f720a63f4a651f7615aee
CRs-Fixed: 2167237
Host driver should avoid BUG_ON, when recovery is
in progress due to firmware assert.
Change the sequence in cds trigger recovery
function to avoid BUG_ON
Change-Id: Ibcce592caf4c4099a9cf3e124c5d2b70134116a3
CRs-Fixed: 2165972
Free deauth req msg, if no ack has been received from fw, in
pe_close() during interface down to avoid mem leak.
Change-Id: I49508b2681f708dc56fc3938162ff856babfb0aa
CRs-Fixed: 2158490
If connect timers like join, auth and assoc timeout are running and
timer are stopped in deactivate lim timers, the connect cmd get stuck
in sme active cmd queue, if no probe resp, auth or assoc resp is
received respectively from AP.
Thus during deactivate lim timers call the timeout API for the
connect timeouts so that connect command fails and is removed from
sme active cmd queue.
Change-Id: I1ddd23ad94fb4b616b9a7868316f05577d6524b3
CRs-Fixed: 2164061
mlm_set_keys_req may leak if return in some fail case or
there is no WMA_SET_STAKEY_RSP.
Change-Id: Ib89709a6656cfcff18341257e116861774489c8c
CRs-Fixed: 2166374
