In the scheduler_post_message, src_id is now added to
know the source module of the msg. The present scheduler
doesn't know about the same which is scheduler_post_msg.
Replace the scheduler_post_msg with scheduler_post_message.
Change-Id: I954a56eb960e8caab25f0734da2f8badf77cad3a
CRs-Fixed: 2306020
In the scheduler_post_message, src_id is now added to
know the source module of the msg. The present scheduler
doesn't know about the same which is scheduler_post_msg.
Replace the scheduler_post_msg with scheduler_post_message.
Change-Id: Ia8c9355528b430bda9231c24c07a648f1931e0eb
CRs-Fixed: 2306018
Rx reception type for packet was populated from
wrong TLV. Populate reception type based on
HT,VHT or HE TLV tags
Change-Id: I3240a9f029b0bfeee8833761531e086bc5df6f91
Host changes to enable HTT version 2 messaging for
PEER map and unmap in FW and changes to handle these
messages in host
Change-Id: Ifbe478212bbbc9c9ea1c1e4791c7a78407c376cc
When a 2G AP vap is brought up on a "WORLD" regdomain (say 0x30),
reg_is_world_alpha2() returns true. Also "enable_11d_in_world_mode" is set
true by default during reg psoc creation. When a regdomain is set, process
master channel list is invoked during which "enable_11d_supp" is set to
true as regdomain is "WORLD" and "enable_11d_in_world_mode" is also set to
true.
As "reg_11d" is enabled, during beacon and probe processing, country
update is done and scm_11d_handle_country_info() is called. 11d feature is
specific to MCL and hence on WIN code base, it causes invalid memory
access and it panics.
"enable_11d_in_world_mode" is MCL specific feature and is disabled for WIN
to avoid any call to scm_11d_handle_country_info for WIN codebase.
CRs-Fixed: 2310809
Change-Id: I7bcac4052c96917120adc59e9e2eaa0e3da8dff1
Introduce a new module WBUFF, which maintains a
pre-allocated pool of skbs for each registered
module and allocates skbs when requeted from
these pre-allocated pools.
The module exposes the following APIs:
1) wbuff_module_init
2) wbuff_module_deinit
3) wbuff_module_register
4) wbuff_module_deregister
5) wbuff_buff_get
6) wbuff_buff_put
Change-Id: Icab723ce29a9a364c822756dee78a0dae1006180
CRs-Fixed: 2313443
Update handling of WMI_SAR_GET_LIMITS_EVENTID for a possible OOB that
can occur if param_buf->fixed_param.num_limit_rows is greater than
actual TLV length of param_buf->sar_get_limits array.
Change-Id: Iccacbb3689e6a7bdd73b2b1f0517d011ccf6d076
CRs-fixed: 2307276
In the scheduler_post_message, src_id is now added to
know the source module of the msg. the present scheduler
doesn't know about the same which is scheduler_post_msg
Replace the scheduler_post_msg with scheduler_post_message
Change-Id: I558adf0cf0335972a1318a5a33d22dc01d545645
CRs-Fixed: 2306015
In the scheduler_post_message, src_id is now added to
know the source module of the msg. the present scheduler
doesn't know about the same which is scheduler_post_msg
Replace the scheduler_post_msg with scheduler_post_message
Change-Id: I1f543cd443ab8cb19bf36fb581041ed3393077e8
CRs-Fixed: 2306017
This change implement VDEV MLME State machine based on design,
and handles valid events in each state and invokes legacy callback
APIs to perform state specific operations
Change-Id: I38a11778cba31276c720bc13c085ade60b1fb0c4
CRs-Fixed: 2307722
This change defines VDEV MLME object, and registers with object manager to
be notified on creation/destroy, and also initializes MLME SM
Change-Id: I75bb7de7326e4bbed21ef9653427c4e0694c3ffc
CRs-Fixed: 2307722
This is generic state machine framework, which provides APIs for state
definition, state transition, event posting
Change-Id: Ie7d5a064967098fcb77a663047c479d1d1576595
CRs-Fixed: 2307722
Currently aggregate vdev/pdev is missing Rx nawds mcast drop
counter, add nawds mcast drop counter from peer
Change-Id: I10650639bf5c56410c0f5311090c8a544df89d5d
Add support to send ast hash during peer create.
This value will be used for packet enqueue to transmit block.
Change-Id: Iea188a4b60f96d7770037265d12e534ee2b55bba
Initialize packet pointer record is_free_pkt_ptr_record to false.
The code flow may not assign the pointer before usage.
Change-Id: I00a4dc0eaf7e426ce48ec746eba975b74d1fec34
CRs-Fixed: 2313459
In the scheduler_post_message, src_id is now added to
know the source module of the msg. the present scheduler
doesn't know about the same which is scheduler_post_msg
Replace the scheduler_post_msg with scheduler_post_message
Change-Id: I795f5d714eebcdbb275daae782ffa6f4d8e7e950
CRs-Fixed: 2306019
Add bound check for desc_id in tgt_mgmt_txrx_get_vdev_id_from_desc_id
and tgt_mgmt_txrx_get_nbuf_from_desc_id
Change-Id: Ie27c473061fb68f1d3486cbfe95c015be77203f9
CRs-Fixed: 2304610
Add following APIs to translate NL param type to
crypto param type.
1.osif_nl_to_crypto_auth_type()
2.osif_nl_to_crypto_akm_type()
3.osif_nl_to_crypto_cipher_type()
Change-Id: Iba0d57e63db98cf81ed0ce5c0a79ae7f8239d1a9
CRs-Fixed: 2300761
policy_mgr_decr_connection_count_utfw() API is using
policy_mgr_psoc_enable() API to reset policy manager table as well
as timer deinit but it does more than resetting the table which causes
a stablity issue. For example, policy_mgr_psoc_enable() API calls to
reinitialization connection_update_done_evt event which triggers
stability issue as it has been already initialized once.
Purpose of delete all connection option is, to reset the policy
manager table, to reset any timers which can be achieved by
calling policy_mgr_psoc_disable() followed by policy_mgr_psoc_enable()
Change-Id: Ie3328e150ead99418ddd5025b42a2669e95e1553
CRs-Fixed: 2305419
Add ini drop_bcn_on_chan_mismatch, default: true.
The ini is used to decide drop the beacon or not
if channel received in metadata doesn't match
the one in beacon.
Change-Id: I6a25d472ae41f4a7f0bdb7a57002975938b2dc33
CRs-Fixed: 2312994
Currently only 16 bytes of wmi command/event messages are logged
excluding wmi header information.
By enabling WMI_EXT_DBG whole command/event messages can be dumped
using qdf debugfs apis. This will help if it is needed to
collect whole command/event messages information.
Change-Id: I72dff1279b1145b8d2ee415db97656f457c0136f
CRs-Fixed: 2309286
As part of wlan_mgmt_txrx_pdev_close only nbuf is freed
in case of cleanup path due to SSR or drive unload and
dma unmap is not done.
In this change:
1) Register a callback to mgmt_txrx component tx ops which
does dma unmap of nbuf as part of pdev close.
2) Revert change id I6a7f5efa665a1da009e594248e88002df35ae9ff
as there are potential race conditions using the APIs added
as part of the change.
Change-Id: Id65388a5f4fcb989659bb2088a5e67a4e4e3d265
CRs-Fixed: 2313073
Kernel 4.14 and later supports dev_scratch for network
buffer which can be used to store data in a nbuf in the
format unsigned long.
Add APIs:
1) qdf_nbuf_is_dev_scratch_supported
2) qdf_nbuf_get_dev_scratch
3) qdf_nbuf_set_dev_scratch
Change-Id: I2a72d369bb53f8f86d4bcee3cf6d13f5e4aff57f
CRs-Fixed: 2313270
If sta_sap_scc_on_dfs_chan = 1, we
allow the SAP on STA's DFS chan.
Allow this for DBS chip as well.
Change-Id: I115984c0e659ca00f244d7b477daf4ccb3f2ccd2
CRs-Fixed: 2306801
We are transitioning to new logging infrastructure
by using existing mtrace functionality.
Add new logging for complete scan request and response path.
Change-Id: Iac644a78ef521721d33ce7568be56b47c55fed6b
CRs-Fixed: 2308272
Use QDF_TRACE log macro to log spin lock abuse when spin lock
debug feature is defined.
Change-Id: I1e5db79f5e6f5fc343f1be000efff6907c4857e1
CRs-Fixed: 2312614
Make the HECAP and HEOP changes for 11ax Draft3.0.
Draft2.0 support can still be enabled by unsetting
SUPPORT_11AX_D3 in config.unified.wlan.profile.
Change-Id: I0c0fd885a43b672baca61011b75a51526481b1ee
CRs-fixed: 2294235
HE format in radiotap header are not being updated for HE_TRIG
frames. Add support for it. This is to support MU-OFDMA frames of
UL.
CRs-Fixed: 2223635
Change-Id: If0a93f6047185bcc51948b613d48d13ecb5e16cd
Skip CAC if cac is already started on the same channel or the new channel
is subset of CAC started channel.
Change-Id: I8f6121f1f8d034acf3f0514a60401a3232becaa2
CRs-Fixed: 2309911
This change is required as a part of setting sifs_rate in the
target through wmi command from host for legacy chipsets.
Change-Id: Ia3ed8a6d33fcb31b290129e1302dfc0000ad4626
CRs-Fixed: 2031293
Trace every msg, and print its src, and dest in
scheduler_post_msg_by_priority for ML logging
Print to F3, and trace it too
Change-Id: I64a2142bf3277e85e970132933f2157b95dad68d
CRs-Fixed: 2306043
Reducing min value of DP configuration parameter to support
low memory emulation platform.
Change-Id: I524dca73b3ce52e138527c7abd1a9d8d0cbe9ac1
CRs-Fixed: 2309295
Define new test config attribute to configure the support
for receiving the MPDU with operating mode control field.
Change-Id: I8f4885ebc705e2d6acfa0c97bdcd6b2bb4baaaca
CRs-Fixed: 2305757
vdev ref is not released in some error path of tdls_process_del_peer,
which will lead to vdev obj failed to be deleted.
Change-Id: I439af4abbb4670d9252296b39d75eb435bb436fc
CRs-Fixed: 2311161
Currently the scheduler cant differentiate between
the destination, and que to which it has to post the
message.
Add que_id, to differentiate between the destination
and que.
Change-Id: I94f81cb4b976dba4571f9cd0d6e059dc72024fcd
CRs-Fixed: 2308108
Change log level for HE flags, HE data and HE MU info fields
added to radiotap header. Earlier log level of info used to
flood on console.
Change-Id: I7754df859bb315fff7e449e263e0d77cf412a852
CRs-Fixed: 2295965
As a part of the cfg80211_get_station command, the driver sends TX stats
(tx rate, MCS index, NSS and flags). Currently there is no support to
send the similar RX stats.
Add support to send RX stats to the framework.
Change-Id: Ic66596d118ad1395706db7638da1b4fdef7dc2d5
CRs-Fixed: 2303308
In HKv1 HW there is a buffersize setting per peer, hence
once we set buffersize we have to stick to this for all
subsequent requests for all tids. If buffersize in Addba
request is more than first session's buffersize, we restrict
buffersize to old value, else we send respond with new size
and send delba to previous sessions not compatible with new
buffersize
Change-Id: Ia71d994ee06ca7b37d93273f5fa69547f816dd20
Crs-fixed: 2247816
EWMA macros which were used for sojourn stats
time delay calculation, causing compilation issue
for x86 platform as x86 platform is on kernel
version less than 4.3 and EWMA macros were
introduced after that version.
Change-Id: I184844c7df8e5b317a095355c2f6a9af9e4747ff
CRs-Fixed: 2308338
TDLS is not supported in concurrency and FW expects set state disable
command in concurrency. Currently, disable command is sent only if the
active connection is present when second interface comes up.
Send disable command to FW irrespecive of active TDLS connections.
Change-Id: I0716a6caf76a8a69da2225f22e385ce259c231b6
CRs-Fixed: 2305714
