RX_CDC_DMA_RX0/1/2/3 ports drives RX0/RX1, RX2/RX3, RX4 and RX5
channels on bolero rx-macro. Update channel mask
as per these mapping and return to channel map
accordingly.
Change-Id: I2e66e601b5137ebc513527827332bbb7cde0acb3
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Left and right channel content can get swapped
in new cdc_dma interface.
DMA interfaces underrun results in Channels being swapped.
This issue is a side effect current SW setup for RX path:
1. HLOS Setup WCD Analog Path, Bolero CODEC.
CODEC would drive Fs to LPASS DMAs requesting for PCM samples.
2. DSP setup RX Buffers in Memory :
3. DSP Configures RD DMAs and DMA RXTX CODEC interface
(Enable CODEC DMA interface buffer and
Enable DMA LPASS_RXTX_LPAIF_RDDMA_CTL0.ENABLE
and LPASS_RXTX_LPAIF_RDDMA_CODEC_INTF0.ENABLE
If CODEC Fs, aligns with DMA interface being enabled
there is an underrun as DMA interface pingpong buffer is empty.
This results in channels being swapped.
Proposed work around while keeping current SW setup order.
Provide a workaround to Keep Fs disabled until DMAs and
CODEC DMA interface are enabled and HW could prefetch all buffers.
SW would keep existing setup order:
1. HLOS Setup WCD Analog Path, Bolero CODEC.
CODEC would drive Fs to LPASS DMAs requesting for PCM samples.
2. DSP setup RX Buffers in Memory :
3. DSP Configures DMAs and DMA CODEC interface
(Enable CODEC DMA interface buffer and
Enable DMA LPASS_RXTX_LPAIF_RDDMA_CTL0.ENABLE
and LPASS_RXTX_LPAIF_RDDMA_CODEC_INTF0.ENABLE)
4. Enable Fs Set #LPASS_RX_CDC_RX0_RX_PATH_CTL. CLK_EN to ONE
Change-Id: I7916667f5d857464cc7d77b51da307ab234cc7bb
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Check for valid port before mux configuration.
Change-Id: Iaa32925f0c23305a2a3cedd0e476372aac380e0c
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
To support up to 6 audio paths activated with different
devices, increase RTAC_MAX_ACTIVE_DEVICES from 4 to 6.
Change-Id: I16c1247b2b2bafdc646d412a75192494bf0e2b95
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Add NULL checks for mbhc in tavil driver to avoid
NULL pointer dereferences when MBHC is not supported.
Change-Id: I43bfd062af6048486256f744bd028b27fedc7f53
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support to limit sample rate and format support based on
codec variant. Register mixer controls based on the codec
limitation.
Change-Id: I8055d2862798e183669e99b472ffc03b6cedd8ca
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Machine driver requires a mechanism to know the codec variant
to limit supported configurations respective to that codec.
Add a function to return the wcd938x codec variant.
CRs-Fixed: 2488322
Change-Id: I16631cccb3abd32c933389e110e5b5a6b762a0e2
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Make SA8195 utilize the same build option as SA8155.
Change-Id: Id1e0f889b907d234c31c31f8730617ea2038b7a7
Signed-off-by: Guodong Hu <guodhu@codeaurora.org>
Direction of Arrival param ids are modified in ADSP Fluence Version9
as currently used params overlap with CVD range values.
Update DOA param id values to avoid mismatch.
Change-Id: I70c779c5a7fc3da3ccdf3ddcd988a20a4908ca81
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Avoid SSR state, and do only clock-stop-resume to reset master when
switching between 44.1 and 48k to avoid redundant re-enumeration.
Change-Id: Iaa955c4ceb75f30c68106468676ddb2551537de4
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Sometimes, headset is not detected after pdr during music playback.
This is because enable_irq does not get called as master remains
in suspend state. Decrease auto suspend timer to 1 to fix the issue.
Change-Id: I8cea3e74487977af801dccac7e4f873831c26264
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Runtime suspend gets called multiple times during SSR
scenarios leading to clock count mismatch. Add logic
to prevent this in all macros and pinctrl lpi driver.
Change-Id: I380631c1db8cd7d94a8909affd8c96c87f24817c
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Modify the makefile to generate header files in the work-shared dir,
which are needed by acdbrtac.bb.
Change-Id: I69a94f0e5913855add4fc9ff79aa1849218e5b8e
Signed-off-by: Guodong Hu <guodhu@codeaurora.org>
Make the sa8155 sa8155ivi and sa6155 utilize
the same obj-option. But distinguish the kbuild-option.
Change-Id: I7ff7c7d30670cb4abb42d46f3632136539a9b82e
Signed-off-by: Guodong Hu <guodhu@codeaurora.org>
DMIC45 clock gpio generates dmic clock on the gpio line when the audio
capture starts on DMIC4 or DMIC5. But the same gpio is also an
wakeup capable interrupt source. So, during audio capture usecase,
GIC receives interrupts continuously as clock gpio toggles. Disable
wakeup capability for DMIC45 clock gpio to avoid interrupt generation
to GIC during the audio capture usecase.
Change-Id: I7793455fd1034a5d391c6a163ca776c6ed0c9b89
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Some clock and data gpios are also treated as wakeup source capable
interrupts. Add support to control the wakeup capability based on
the usecase.
Change-Id: I32a12f004afbf04f82e40be62747b0af8836be82
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
In a stream we need to add support for downmixed stereo channel
along with the left and right channels. Add custom channel map
to support downmixed stereo channels.
Change-Id: Icb7fa226a6f07ee4f7d00b8f55fe578c27719c86
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to switch tws channel mode for aptx adaptive
encoder.
Change-Id: Ife4170be56b152d34758a1cfd20fa4ec203742db
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add Multimedia22 frontend in DAI link for
automotive machine driver.
Change-Id: I1d07c92f330f2c2a2b7dc4708021a5b6b0aa046e
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Add xt logging disable mixer control in order
to differentiate whether excursion logging data
needs to be sent or not for the use case.
This is required for the cases where same backend
is used for multiple devices and xt logging data
needs to be logged only for a particular device.
Change-Id: I2cec67ddc18cbd63c5bc678eba77ea96b9a13963
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
