Check for HDD context validity for SAP Net dev stop ioctl to
resolve crash during SSR.
Change-Id: I09c57da5db4b072a8066f3c2b22c748cd79c293c
CRs-fixed: 2007350
During SSR firmware is reloaded and FW responses for previous
vdev sessions are not received. Thus cleanup FW response timers
on SSR.
CRs-fixed: 2005625
Change-Id: I95e2d85b29da240d372039deeece9db6add74edb
During SSR firmware is reloaded and FW responses for previous
vdev sessions are not received. Thus check for SSR before host
crash trigger on FW timeout.
Change-Id: I8be8b7264c133fa115a5b6ac6a3b865f7040e739
CRs-fixed: 2005995
IPA resource information allocated during cds_open must be
updated to IPA HW before configuring to FW in cds_enable.
Thus remove IPA HW configuration from HDD IPA init function
to do this action at every reconfiguration.
CRs-fixed: 2004133
Change-Id: I8761c06c1e84b68addbdcddccb4c652166c4c306
SSR can happen during SAP initialization. Thus check of SAP
initialization complete before attempting to restart SAP instance
during SSR.
Change-Id: Ib26116cfc33684035df692ae6c7b5d83cb0a27b8
CRs-fixed: 2005281
qcacld-2.0 to qcacld-3.0 propagation
Presently, during subsystem restart Host is sending sap restart
indication to framework(via carrier off) to do SAP unload/load.
But SAP restart functionality is removed in framework when the
carrier off event is received, leading SAP fails to come-up
after subsystem restart.
Add support in driver to do SAP restart internally without sending
restart indication to framework, during subsystem restart.
This feature is controlled by ini param 'gEnableSapInternalRestart'
and by default it's enabled.
Change-Id: I76cb73c1887d4d8124cd9a1c29b9aac47642072a
CRs-Fixed: 1105651
WLAN IPA UC data path initialize should be sync up with UC load
status. If UC driver is not loaded when WLAN driver loading,
WLAN UC data path initialize should be delayed till UC driver
will be ready
Change-Id: I297a53d1913ec4d88a5c51794959dcfebf85b45b
CRs-fixed: 786656
If ADD TS is sent it will be an active command in SME till driver gets
resp from peer or timeout. During this phase if LFR3 roam sync event is
received from firmware then PE session cleanup will be done and
SME/CSR is updated with new BSS info. In LIM, 'gLimAddtsSent' flag is
set while processing add tspec request and 'gLimAddtsSent' flag will be
reset once add tspec response received or addts rsp timeout.
This timeout doesn't expire because as part of LFR3 roam sync,
PE delete session is done which stops the timer. Because of this
'gLimAddtsSent' flag is not reset and add tspec response is not sent to
SME, this blocks further SME commands as addts req is not removed from
the active command list. This also blocks PE msg processing as
gLimProcessDefdMsgs is set to FALSE when addts request is sent.
This is not reset as the timer is killed as part of pe delete session.
To address this issue, call lim_process_sme_addts_rsp_timeout()
to reset the 'gLimAddtsSent' flag and send addts rsp timeout to SME.
Change-Id: I7cd1f38fa317bb0a10e22de242aaf42ff62641fd
CRs-Fixed: 1104590
'fast_roam_enabled' flag does same as 'do_not_roam' flag which is used to
track whether roaming is enabled or disabled per CSR session.
As per code 'do_not_rome' flag alone is sufficient to track roaming status
per session.
Fix to remove redundant 'fast_roam_enabled' flag to allow vendor roaming.
Change-Id: Id7f6e547b883c932f615cfbf89eeb30d47d6408e
CRs-Fixed: 1105973
qcacld-2.0 to qcacld-3.0 propagation
Add change to validate no.of RIC data desctriptors
before using it to access RICData array.
Change-Id: I0ac4e9e1eb61690b3c13a74fa0edfc5af13d88c6
CRs-Fixed: 1102327
qcacld-2.0 to qcacld-3.0 propagation
Currently host prints PTK and GTK key information in default logs.
Fix to remove the debug logs which prints sensitive key information.
Change-Id: I358b09b77d23eeb5da7d826859ae119a8ea4af8a
CRs-Fixed: 1097857
qcacld-2.0 to qcacld-3.0 propagation
Driver will not allow scan if connection is in progress.
Add driver changes to generate bug report and trigger SSR
if current session id, rejected reason matches with last rejected
sesssion id, reason and time delta between current time and
last rejected timestamp is greater than 5 mins
Change-Id: Ic64a6fd443104b291b5b7f6cda3bfbe8273c671a
CRs-Fixed: 1081489
Avoid NULL pointer dereferencing of mpdu_buf by putting NULL
check before using it in htt_rx_restitch_mpdu_from_msdus func.
Change-Id: I726891d4fc1f6928cbda911932dbbcd2ec681b63
CRs-Fixed: 2008901
wlan-cld3.driver.lnx.1.1-dev to wlan-cld3.driver.lnx.2.0-dev propagation
If station is connected to an AP with open security, fast
transition would fail as preauth is attempted only if FT
ies are present.
To fix this, Preauth is attempted even if FT ies are not
present for a 11R connection in open security.
Change-Id: I0ac15fc63b4b97a0e2fcecfe70d7cfc1c9277318
CRs-Fixed: 1086498
wlan_cfg.h header file was not getting included due to error in the
wlan_cfg path.
Change-Id: I97d706f1c35475e4da4be3d181f2d6c215b531cc
CRs-Fixed: 2005582
Make changes to support compilation for the files that have
been renamed. Rename the files from wlan_serialization_legacy_mcl_api
to wlan_serialization_legacy_api to keep it more appropriate.
Change-Id: Id219a9f3e00bef0ed85408539b33d54462bf91b5
CRs-Fixed: 2012863
For testing purposes, expose the ability to override the interface pause
setting sent to firmware during WoW enable. Relatedly, allow userspace
to specify which wakeup trigger firmware should use, instead of assuming
HTC wakeup.
Change-Id: I265ccef7ca5304c94bcb5ff2eb9a3d35cfa74191
CRs-Fixed: 2011131
PE is sending the deauth frames to all the connected tdls peers
while processing the deauth frame on STA interface from AP. But it
is not deleting the TDLS peer.
This change is to delete the tdls peer after sending the deauth frame
to tdls peer.
CRs-Fixed: 1108945
Change-Id: I0e115bf005e7d3bb3102f170f0d614160b9a0e38
During wifi-on the framework will load the driver and starts the
supplicant. In the present scenario, as soon as the driver registers
with the platform driver it checks whether FW_READY indication is
recieved. If the FW_READY is received the platform driver calls
probe of the driver in same context of the wifistate machine. If
the FW_READY indication is not received it calls the probe of the
driver in the work queue context. This is resulting in the wifi grey
out in the UI.
So, wait for the driver probe completion in the module_init, before
returning the context to framework.
Change-Id: I21b70f7e383bde07ac8cc3d4969be18b840d26a4
CRs-fixed: 1112295
On roam, obss scan params, sta ext capabilites and
qos map set are not updated to pe session entry
before returning from lim_process_assoc_rsp_frame.
Fix is to copy QoS map set, update obss scan params and
sta ext capabilities in PE session entry before return.
Change-Id: Iad35491c04452b6d459dde94713fc9c627c098e1
CRs-Fixed: 2007784
During legacy serialization's code review, few comments were provided.
Fix them.
CRs-Fixed: 2005532
Change-Id: Id5daea23532f263aea1e1bb9c3daa4651274890f
Legacy SME module is using old serialization mechanism, enable new
serialization mechanism.
Provide ifdef switch to fallback to old serialization in-case if it
is required to move to old serialization.
CRs-Fixed: 2005532
Change-Id: I4801dbab53e451206e2ff0904d102676fd7336e2
There is new legacy serialization MCL file added to serialization
module which needs to be compiled for MCL platform and needed to
add reference in SME module.
CRs-Fixed: 2005532
Change-Id: Id946a62f6e0dec4531deccc83dae6373d396a91a
