qcacld-2.0 to qcacld-3.0 propagation
In limInitPeerIdxpool, driver initializes gLimAssocStaLimit/
gLimIbssStaLimit entries of peer index pool. But there is a chance
of allocating less memory for peer index pool in peCreateSession
which can overwrite adjacent memory locations as maxStation can be
different from gLimAssocStaLimit/gLimIbssStaLimit. Fix this by
initializing maxStation entries.
Change-Id: I915e67fe7a15ebe622273af971d8a88ad78585cf
CRs-Fixed: 1025378
qcacld-2.0 to qcacld-3.0 propagation
Currently pmfComebackTimer is not initialized during roaming. This
can lead to error in pe_delete_session when driver tries to destroy
pmfComebackTimer. Fix this by initializing pmfComebackTimer during
roaming. Also, handle status eSIR_MAC_TRY_AGAIN_LATER as failure
during roaming.
Change-Id: Ic9c4e996c4078d09ef7cd9b3b073105d94eb53fb
CRs-Fixed: 1037640
qcacld-2.0 to qcacld-3.0 propagation
use_protection in erp IE was not reset after legacy AP goes away
which was leading to reduced throughput issue.
Fix is to reset protection bit and update the FW once legacy AP
goes away.
Git-commit: c7218f04e83907f1bba51131adf448360076d1d4
Change-Id: I4138434477e1de432b9547ce1aec4968a559188f
CRs-Fixed: 1006601
qcacld-2.0 to qcacld-3.0 propagation
Client connectivity with SAP fails after Association due to DHCP Timeout.
This happens as iwpriv command is issued to change the SSID type to hidden,
As part of this command VDEV STOP->VDEV RESTART->VDEV UP are issued to
firmware. DHCP frames are stuck in the driver queues as queues are paused
as part of VDEV restart sequence done for hidden SSID. VDEV unpause is not
done after VDEV up which leads to this issue. This fix unpauses the data
queue after the SSID configuration is done. Also, recalibration of Hidden
SSID setting is avoided if the required setting(broadcast/hidden SSID) is
already configured
Git-commit: a14bb2ab3423674c2b6a1a67f7a33232816af7f7
Change-Id: Ic31fc5c7fc8ea7d47358cf701e51fa830eefd2ab
CRs-Fixed: 990208
qcacld-2.0 to qcacld-3.0 propagation
User can configure the vendor IE and access policy from
application. Driver has to parse this vendor attribute and
update the protocol stack.
Change-Id: I176570336aea74b10c5a7e6ad42ed9854dc11b8c
CRs-Fixed: 1020078
qcacld-2.0 to qcacld-3.0 propagation
User configures vendor IE and access policy to allow or deny
association. PE should allow or deny connection based on access
policy and presence of vendor ie in probe request/association
irequest frame.
Change-Id: Ia2714ba07a67602e552a6f43928f02de0d4d0b9b
CRs-Fixed: 1020078
qcacld-2.0 to qcacld-3.0 propagation
During roaming the connected AP's operating channel is used instead of
preauth channel to fetch the band, based on which the data rate is set.
Due to this incorect data rate is set.
To address this, use the preauth channel during roaming to fetch the band
and set the data rate accordingly.
CRs-Fixed: 1017943
Change-Id: Ia3bf13c1a93a156eba8461bcdcf3490b9f49c2a2
qcacld-2.0 to qcacld-3.0 propagation
Currently, On sending disassoc from HDD lim will process
disassoc and clear's session of station and thus leading to
drop deauth in lim since context is already cleared. Hence
deauth frame is not sent from SoftAP although deauth command
is executed on hostapd_cli.
Fix will ensure to send disassoc command through new API
and doesn't clear's session and the same is cleared after
sending deauth.
Change-Id: I912a91f1df4001bb2d4f1f0d6031cc102d1bbd65
CRs-Fixed: 981121
qcacld-2.0 to qcacld-3.0 propagation
use the same reason code in the disassoc, which the upper
layer has passed to the driver
Change-Id: I6302a5c8318a8e3c1221b9272637455da4e7f150
CRs-Fixed: 852387
Propagation from qcacld-2.0 to qcacld-3.0.
Add sanity check based on TLV len in addition to the check
based on TLV tag id to ensure that if fw does not support or
is not sending rssi stats then HOST does not process it at all.
Change-Id: I92b197f9578aa003bf622617c363fea7334dbcb2
CRs-Fixed: 1023179
Propagation from qcacld-2.0 to qcalcd-3.0.
Add support to get per chain rssi from fw via
already existing WMI command WMI_REQUEST_STATS_CMDID
and then store it in the station_info structure defined
by cfg80211.
Change-Id: Id50c96dd322b5ca4db34cf2df901730d8b103251
CRs-Fixed: 1005367
Propagation from qcacld-2.0 to qcacld-3.0.
Rename WMI REPORT_STATS_EVENT fields.
Change the names of some of the REPORT_STATS_EVENT fields to better
describe the information they contain, and move some of the rx stats
to be at the peer level.These changes are not backwards-compatible,
but since the current defs are not yet being used by host or target.
Change-Id: I37d0fdf9b65a55f42e935e4917db30c4eb316607
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add tx frame count and MAC clock to WMI chan info event
message.
Change-Id: I79c2a07504a5ff84ebf4b48ca00ef3c299fd15f1
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add/refine 802.11ax/HE defs used in the host/target interface.
Change-Id: I28f5e0c87933f75e555a763c1e3c803a9c435cea
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add ta_max_duration to wmi_ocb_set_config_cmd struct
(and fix some WMI comments).
Change-Id: Ia5fd7aede98940e11f8ab558bcea50b68627de2c
CRs-fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Add HW mode config type in HW mode capabilities.
Add max MU beamformee field to supported flags in
MAC_PHY_CAPABILITIES.
Change-Id: I015c31dbbff9d180c6338032ab03ec025d32ba55
CRs-fixed: 865207
qcacld-2.0 to qcacld-3.0 propagation.
Validate ssid length before accessing the ssid
if the length exceeds max ssid length then return.
Change-Id: I6902a8a3edf6547cf30d37fe5e435ad4f226ac46
CRs-Fixed: 1059205
qcacld-2.0 to qcacld-3.0 propagation
Validate cfg_ini before dereferencing the ini
parameter gEnableRoamDelayStats.
Change-Id: I0b2b78f8838cb1c46c60669b8f327ac18e863e80
CRs-Fixed: 1059205
There's mistake that pld_power_off calls pld_pcie_power_on. Fix
this by calling the correct pcie power function.
Change-Id: I9e968d749479856510e0dd7f32f5babc57b6ebed
CRs-Fixed: 1064058
The CDS config flag bpf_packet_filter_enable is not being populated.
Populate bpf_packet_filter_enable with the corresponding value from
the ini config.
Change-Id: Ia13386e74d43d7a5cad55e4c77f5eb8bcdc9f43b
CRs-Fixed: 1067041
The WLAN_FEATURE_MBSSID conditional compilation flag is no longer
needed since MBSSID is a required feature. Remove this flag and
any alternate code referenced in the conditional compilation blocks.
Phase 3 covers wlan_hdd_hostapd.c, with other *.c files to follow in
future changes.
Change-Id: I740344af895edadbc30cb8a3d8aea2909d9661cb
CRs-Fixed: 1066509
The WLAN_FEATURE_MBSSID conditional compilation flag is no longer
needed since MBSSID is a required feature. Remove this flag and
any alternate code referenced in the conditional compilation blocks.
Phase 2 covers wlan_hdd_cfg80211.c, with other *.c files to follow
in future changes.
Change-Id: Id7171529eaeefe652085bd1ed6377e3cde050694
CRs-Fixed: 1066411
The WLAN_FEATURE_MBSSID conditional compilation flag is no longer
needed since MBSSID is a required feature. Remove this flag and
any alternate code referenced in the conditional compilation blocks.
Phase 1 covers wlan_hdd_p2p.c, with other *.c files to follow in
future changes.
Change-Id: I7c68b0af7181cdabc324d94464ae6ceb8edd66df
CRs-Fixed: 1065945
1) Do not dereference mac_ctx for logging when mac_ctx itself is NULL
2) Use standard logging mechanism such as the QDF infrastructure for
logging purpose
Change-Id: Iedb4b5d20fd7aa85ff1b98e5fab4edb9de51f7b2
CRs-Fixed: 1065301
Once WMA context is retrieved, check if it has NULL value
before dereferencing it
Change-Id: I9896204933deb0588bca51e006e1477d5ed6c03e
CRs-Fixed: 1065301
Some HDD suspend/resume logging messages are vague or include redundant
status codes. Update these messages to reflect what actually happened and
remove redundant status codes.
Change-Id: I5c4a481a8fbbdebe88f2ecffffb1f2189922da4f
CRs-Fixed: 1062544
PM suspend and FW interrupt handler is running at same time
which is leading to multiple race conditions and host is missing
FW wake up interrupt which is causing APPS not waking up reliably.
Define .suspend_noirq and .resume_noirq callbacks and make
sure there is no pending FW interrupt before allowing PM
suspend to complete. Kernel PM suspend framework gives guarantee
that suspend_noirq and device interrupt handler can't run
simultaneously. This helps WLAN driver to reliably detect FW
wake up interrupt during PM suspend and fail PM suspend gracefully
if FW has requested for initial wake up.
Change-Id: Ic82d7dd6b6b743dd3f55b036e012ad0c8bebd50d
CRs-Fixed: 1060748
Register suspend_noirq/resume_noirq callbacks to kernel. It will
make sure no wake up is pending from FW and if initial wake up is
received then failing it should trigger resume.
Change-Id: Ie553dfc1401c2c6934961773bc98a24626a9cd34
CRs-Fixed: 1060669
