If SAE/H2E required by hostapd configure, it must populate in
supported rate or extended support rate set, add host driver support
to check this flag and populate it in extended support rate set.
Change-Id: Id75b5743e93a1a0f1d13150d5436d256e2ca117c
CRs-Fixed: 3016492
For STAUT to follow the rules governing OBSS Narrow Bandwidth RU in
UL OFDMA Tolerance Support, bss_color_collision_det_sta to be set
to 1.
Change-Id: Ibe283f8bec9febbaf9a876d1afd55389ea4c971d
CRs-Fixed: 3053624
In delete pmksa call for FILS case, the userspace sends only the
ssid and cache id on the pmk cache. But the driver copies only the
bssid which could cause invalid bssid being copied and the delete
pmksa operation fails always.
Fill pmksa ssid if SSID and cache id are provided, else copy the
bssid.
Change-Id: If18cfd86983c9fe9ae421295accf12bf1e8de148
CRs-Fixed: 3072262
Current only TYPE_STATION_STATS is designed to be send
by qmi. and other request type should send by wmi.
if sending by qmi, qmi_get/qmi_put should be call to protect
qmi send and qmi response.
Change to check type and only allow TYPE_STATION_STATS to be
send by qmi.
Change-Id: I57b0bdb6717e259606993ea24ef024745a456664
CRs-Fixed: 3073744
Current when open interface, country change work will
start, but as hdd_open is holding psoc sync, it will
wait for 500ms to resched, after 500ms most of the time
the 1st scan comes, it will send WMI_SCAN_CHAN_LIST_CMDID
which cause scan abort.
Change wait time to 30ms, so country work can be finished
asap once hdd_open done, it will not affect 1st scan.
Change-Id: I13064eef7197464598722c0dce3fb1bf361cb841
CRs-Fixed: 3075136
Add ini support for tx_retry_multiplier and send
tx_retry_multiplier to fw as PDEV_STATS_TX_XRETRY_EXT
pdev param, so that fw can multiply the counter by the
percentage provided by user.
Change-Id: Ie2f06dc3aaa4a161a451b68abd085cc1537eb468
CRs-Fixed: 3066799
This change sends the new wow event in the bitmap to FW only
when the roam stats suspend mode attribute is enabled from the
user space.
Also, the new wow reason is added to wake up the host while
sending the roam event stats.
Change-Id: Iaefb229929e8791870f33bf787487f7c20daf218
CRs-Fixed: 3050830
This change gathers the roam event stats from the FW.
New vendor event is used to fill in the vendor attributes
whenever the roam stats are received from Firmware.
Change-Id: I9a2ddef62d26b0b68897891788733df452ac1ceb
CRs-Fixed: 3036518
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
Currently, we are updating tx failed based upon
MPDU tx fail count received from FW.
In addition to the fail count received from FW
add MPDU tx retries done in case of successful
transmission to tx failed.
Change-Id: Ib993c71a99dd4d59df116a454336716352122a8e
CRs-Fixed: 3058364
WFA cert case expects OCV capability in RSN cap, if
STAUT supports OCV. But, as part of join request
processing, host disables self OCV capability if the
AP doesn't support OCV in beacon.
Delay the OCV capability intersection till the assoc
completion, so that OCV capability gets sent as part
of the assoc request.
Change-Id: I42a65b2506e1cbd791f328f6223b70081c24be25
CRs-Fixed: 3068832
Host sends the EXT CAP IE based on the capability
coming from the supplicant in join request. But, after
roaming the cached join request will be freed. Therefore,
after roaming few capabilities sent by the userspace are
not saved and therefore lost in reassoc request.
Save the EXT CAP IE from the join request in the VDEV
and use the cached capability for sending Ext cap IE.
Change-Id: I71947388b4c6e9e56a5832557416d9b462de70e2
CRs-Fixed: 3038496
Avoid OOB read in sch_get_csa_ecsa_count_offset API by
adding check for ie_len before subtracting element ID len
from it.
Change-Id: Id86e69b2c5abc37a4f33125dc5fd0bd1d92f64a7
CRs-Fixed: 3049251
Avoid OOB read in dot11f_unpack_assoc_response API. Add check
for when nBuf == len to read another byte of pBufRemaining.
Change-Id: Iccdb0b268d16f4169b8b701ade6085d47897f785
CRs-Fixed: 3042293
cfg80211 resume request will be rejected if there is an SSR in
progress, Because of this modules are not coming out of suspend state
when there is an SSR after suspend request.
To avoid this, resume all modules before recovery shutdown.
Change-Id: I3d749e0a5971468805a009cb990a220e0645c169
CRs-Fixed: 3016002
With connection manager enabled, the send IE request is
not sent after connection.
Add support to send set IE request after connection is
successful in connection manger.
Change-Id: I2f30eb67ba295e0ca416ccb40e12a376e0d7a47e
CRs-Fixed: 2976734
The extended capabilities IE is sent during vdev create and
this doesn't have the merged extended capabilities from the
userspace. So some of the fields advertised in association
request are not advertised in the re-association request.
Fix the missing fields not set in the extended capabilities IE
by sending the set IE message to LIM after connection is
successful.
Change-Id: I322d057f602e0362f12b362e7818e84cbb056cf4
CRs-Fixed: 2971072
This reverts commit I784e4b1735f4f217713f65c30092bac2ad6cb698.
Some AP reports HT20 in beacon frame but HT40 in assoc response
frame. FW roaming will decide BW HT40 based on assoc response.
In previous change host will decide BW based on assoc response
as FW does. But the issue is after roaming, the host will check
beacon for AP BW changing and then do vdev restart. But the vdev
restart may be rejected by FW if the FW roaming is still in
progress. To avoid the complication, revert the change.
The original issue will be fixed by validation the channel
segment by Ia41c51feca855cab54e908438c51a8d12075f864 to avoid
the kernel check channel failure and disconnect.
Change-Id: Ib170acb3588cf07bf666d446f5dde73de2d4705b
CRs-Fixed: 3061233
When ROAM_TARGET_IF_CONVERGENCE feature enabled, the new
channel freq and BW from roam sync are not updated to wma
interface struct.
Fix by update ch_freq & BW to wma in wma_roam_update_vdev.
Change-Id: Ia41c51feca855cab54e908438c51a8d12075f864
CRs-Fixed: 3045108
There is frequent output when get unexpected vendor specific action
frame. So, add this change and reduce the log level.
Change-Id: I9d832546a4436bdf7dd25cb00a7de5cce1295b31
CRs-Fixed: 3060750
2 threads blocked to wait channel_switch_complete_evt for SAP channel
switch is already in progress, qdf_event_set only woke up 1st thread
later, 2nd thread still kept blocked with hold net_dev for debug id
NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP, leak happened.
Change-Id: Iad296f68aeaefe5a6b88ad6bea95cc377b2ae515
CRs-Fixed: 3061960
In P2P, if NDP is present, limit max ROC duration to
400ms on DBS and 250ms on non-DBS case.
If NAN is present, limit max ROC duration to 450ms on DBS
and 300ms on non-DBS case.
Change-Id: I2e943d2f55984464812bba16ca78dfab8681cf30
CRs-Fixed: 3046904
Currently, the Rx/Tx highest Long GI data rate field in
the VHT IE is filled with short GI data rate. Therefore,
change the highest supported data rate back to LGI data
rate.
Allow the short GI rate to be filled as the highest supported
rate in the wiphy if short GI is enabled.
Change-Id: Ie0652b4cdeef370cb8ad3d11b5d36b6959c1cbcb
CRs-Fixed: 3053946
For SDW5100 release branch path for common dir is changed to
device/qcom/common/monaco which is being specified in target mk file.
This change ensures other SI compilation will not break.
Change-Id: If8aa35a2e2da0e42b34c77ff8097c26aa2aa83d1
CRs-Fixed: 3020014
Since the code under FEATURE_HAL_DELAYED_REG_WRITE_V2 has been
removed and cleaned up, removing the build flag from Kbuild.
Change-Id: I66072af952877881fb700869ae4774e4f1a388cc
CRs-Fixed: 3056477
Currently during wlan suspend DP refill thread is suspended first
then RX thread is suspended but if RX thread suspend fails then
refill thread should be resumed if not refill thread will be stuck
in suspend state forever.
To avoid refill thread getting stuck in suspend state, resume
refill thread when RX thread suspend failure is encountered.
Change-Id: I2dfdfa881bb3cb660b83067c796d3a833b86ef5f
CRs-Fixed: 3054903
Deliver tx offload management to mon interface in packet capture
mode based on config filters added by vendor command.
Change-Id: Id60529b963e3021d7744858980b316b546606550
CRs-Fixed: 3045460
