Add check of trace unit power property to enable/disable that
keep the trace unit powered.
Change-Id: I66dbfee16df63480c9309092e61ee39b8b0cd6e8
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Add support to configure test_ctl, user_ctl and cal_l fields for PLLs.
Change-Id: Ib5a7a74aecd8d9885e0a3034f097c13cda4d2268
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Add programming sequence support for managing the Lucid
PLLs.
Change-Id: Ia63067d88bd1f309d190b1ec5b0f272b40209a71
Signed-off-by: David Dai <daidavid1@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
While rmnet_data driver itself is not required, some of the
definitions are used by modules such as mhi and ipa.
Change-Id: I892c2ff51819262632769b3da32a1c2adf6b3543
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
SLPI (sensor low power island) uses Qualcomm Technologies, Inc
Digital Signal Processor for all sensors connected via SPI/I2C.
Firmware is required to be loaded to enable these sensors and
algorithms to execute on DSP. This change adds driver to load
the firmware.
This snapshot is taken as of msm-4.19 'commit
<db92782eadcfd7e8186f6f7487194ebbf8c31c19> (Merge "icnss:
Reduce the shutdown timeout from 50sec to 15sec")'.
In addition change copyrights, type and description in KConfig
and directory change from sensors to soc/qcom.
Change-Id: I15350924e7febe287dc9d7e21885b2e11426a2cc
Signed-off-by: Jun-Hyung Kwon <junhyung@codeaurora.org>
Enable RSC controller driver to be compiled as modules. Since RPMH
communication is need for enabling/disabling critical clocks and busses
needed for the application processor, it is better to keep this module
enabled. Hence declare the driver as a builtin platform driver.
Change-Id: I41a657c0d618efb7c3460833ffb8eb5d445885a0
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Add support to dump command DB data via debugfs. This allows drivers to
lookup data resource information without a resource ID.
Updated to use leXX_to_cpu() functions when reading cmdDB memory.
Change-Id: I04e7466f76ceea00d762752e0c0123edfabe0f64
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
llcc supports 2 memory controllers in backend on certain systems.
This patch adds support for dual memory controllers. Also fixed
filter related changes in LLCC. Cleaned up the code for better
code walk.
Change-Id: Ie054d9182b20ec0811f117c2289aa857f0384baf
Signed-off-by: Avinash Philip <avinashp@codeaurora.org>
This is snapshot of the llcc_perfmon driver from msm-4.14
'commit c9961d61d6d8 ("drivers: soc: llcc_perfmon: Add llcc_perfmon
support")'
This LLCC perfmon driver provides Sysfs interfaces for the clients to
monitor the events. Driver support for monitor events from LLCC sub blocks.
Also updated driver to handle opcode & cache alloc filters.
Change-Id: Ic711fdbc774d2da1938feff5c0d7888e5cf8495a
Signed-off-by: Sankaran Nampoothiri <snampoot@codeaurora.org>
Signed-off-by: Avinash Philip <avinashp@codeaurora.org>
This is a snapshot of cnss_prealloc driver and associated files as of
msm-4.19 commit 94d53f998edd
("cnss_prealloc: Update prealloc memory table").
Change-Id: Ic6e853bf651e2a0e2b672bc68d42929c3b55ef93
CRs-Fixed: 2500800
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
This change enables logging of irq number and name which triggered
wake up of the system from deep sleep. This helps in debugging the
spurious wakeups due to interrupts from various subsystems.
Change-Id: I6246871e638e761031c1d2f2b4bb1964b34bd2e5
CRs-Fixed: 1033023
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Enable the fast IOMMU DMA mapping facilities on Lahaina.
Change-Id: Iaf94518581585d83bb731452183f45a320898b56
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
This is a snapshot of cnss_genl driver and associated files as of
msm-4.19 commit 2a93006b9f9f
("net: cnss_genl: Add snapshot of cnss_genl driver").
Change-Id: I86a557ce898ecb746c8e0afc70a1908415fc2e87
CRs-Fixed: 2500800
Signed-off-by: Yuanyuan Liu <yuanliu@codeaurora.org>
In some cases like SSR, qmi clients are releasing handles without
considering the waiting transactions which results in use after free
of qmi handles after the transaction wait time completes.
Abort the pending transaction during qmi_handle_release to avoid the
use after free.
CRs-Fixed: 2328443
Change-Id: I59e19222b2b9a8ace3d37b4a70ea891ff88db07e
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Add a default send timeout for kernel qmi sockets. If a remote proc
crashes, there is a chance that the before shutdown cleanup will try
to send messages to the remote processor. When enough messages are
sent to a single port, the qrtr flow control will kick in and the QMI
socket will block indefinitly. Set the timeout to 10 seconds which
should be long enough to not affect normal functionality.
Change-Id: Ie12dd163a0c4ac1a3dc037e5a29e39395c3cc948
Signed-off-by: Chris Lew <clew@codeaurora.org>
Add a check for the zero size flow control packet when handling data
from the socket. This packet is expected and should not be printed as
an error.
Change-Id: I74a9edf752cb5f186ef133ae9d8b12cc93ee1b18
Signed-off-by: Chris Lew <clew@codeaurora.org>
Enable the SMP2P sleepstate driver to deliver power state changes
to remote processors like slpi.
Change-Id: I9fe755d2462b7a593e5cbffacd6b466cb21d9f15
Signed-off-by: Chris Lew <clew@codeaurora.org>
Enable the MSM QMP driver to communicate with the AOP processor.
Change-Id: I28b6feb5f774e73076893dd7f868d0f806a31f19
Signed-off-by: Chris Lew <clew@codeaurora.org>
Enable the QMP Client debugfs driver to enable a debugfs node to send
messages to AOP through shell.
Change-Id: I4290469c05e4dd93c1c8931b4b1d29c60134982c
Signed-off-by: Chris Lew <clew@codeaurora.org>
Enable the HWSPINLOCK, SMEM, SMP2P and SMSM drivers to enable point to
point communication over SMEM with remote processors.
Change-Id: Ia1a648e837542fd09e726b393895e3129d857da9
Signed-off-by: Chris Lew <clew@codeaurora.org>
Enable the IPC Logging driver to enable clients to write debug logs
into a circular buffer that can be read from debugfs.
IPC Logging is debug feature and should only be enabled on debug level
configurations.
Change-Id: Idb5977c142d6b0a88e83e975a0ba85aa3d1c55d2
Signed-off-by: Chris Lew <clew@codeaurora.org>
This snapshot is taken as of msm-4.19 'commit <dac6e981b55e>
("Merge "icnss: Skip removing WLAN host driver during recovery"")'.
In addition, replace wakeup_source_trash since API is deprecated.
Change-Id: I0bd88adc9a8e604300b610d7f24dae6cd4e57281
Signed-off-by: Chris Lew <clew@codeaurora.org>
drivers/soc/qcom/smp2p.c: In function 'qcom_smp2p_do_ssr_ack':
drivers/soc/qcom/smp2p.c:214:2: error:
suggest parentheses around assignment used as truth
value [-Werror=parentheses]
drivers/soc/qcom/smp2p.c: In function 'qcom_smp2p_notify_in':
drivers/soc/qcom/smp2p.c:176:23: error:
format '%x' expects argument of type 'unsigned int', but argument 6
has type 'long unsigned int' [-Werror=format=]
drivers/soc/qcom/smp2p.c:281:3: note: in expansion of macro 'SMP2P_INFO'.
Fixes: 322d40176558 ("soc: qcom: smp2p: Add snapshot of smp2p driver")
Change-Id: Ic0dedbadbe4e61dd53e7bb22c54c2eb2ca94eb48
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
