Monitor buffer are required only when monitor VAP is created. Allocate
these buffers only when montior VAP is created. This provides memory
savings when no monitor VAP is created/required.
Change-Id: I3ddaef00615f00fd13adb2789469a62f1a0af165
CRs-Fixed: 2491873
Currently ext scan is enabled by default in driver which
is increasing driver size significantly and ext scan
is not getting used anymore.
Disable ext scan with feature flag CONFIG_FEATURE_WLAN_EXTSCAN
to reduce driver size and fix related compilation issue.
Change-Id: Id2344e6ed21caefa459773bb6e891ffb1e70cb92
CRs-Fixed: 2491455
Fix bit value to stop target_if timer when
start is attempted for same which is already
in execution.
Change-Id: I0d299719d865d92cd5515de4d0441dd215f0aecf
CRs-Fixed: 2494428
Send proper minimum and maximum agile preCAC timeout values to the target
as part of starting agile DFS detector. Add a common agile preCAC
parameter structure with the timeout values, channel and width fields
which are to be sent as part of configuring agile detector.
Change-Id: If5f5b179aa12a6c549cb9a4402aa10e957129d78
CRs-Fixed: 2482929
For a 2.4 GHz pdev, dfs object is NULL and hence 'dfs is NULL' print is
in tgt_dfs_set_agile_precac_state().
To fix this, add non 5 GHz pdev check before dfs NULL check.
Change-Id: I32cf622d7b769ce841d30de538527639b87f459b
CRs-Fixed: 2490145
Size of rx_pkt_hdr tlv structure is used to check if there is enough
space in the SKB to add radiotap header.
The issue is seen due to a single SKB can hold the multiple TLVs and
the next subsequent SKB has the data. In this case, there is no headroom
available in the second SKB. Therefore crash seen while adding the
radiotap header in the second SKB.
To fix this issue, check if the SKB has enough headroom space. If not,
drop the frame.
Change-Id: Icd11f946c0aee974dde2ef21f59cfe3d8b87fa5d
CRs-Fixed: 2480719
destination ring MPDU processing is stuck because ppdu id is
not sync between monitor status ring and monitor destination ring.
Add logic to detect destination ring process stuck and jump over
destination ring stuck entry.
Change-Id: I17d9b5fba06a28239ec64d864ae7944ae04a7dae
Add new CDP API cdp_register_rx_mic_error_ind_handler to
register rx mic error callback. Also, define new structure
cdp_rx_mic_err_info for holding MIC error information.
Change-Id: I4d5d6426b1d5f04848afd48f6dbf51edba291a20
CRs-Fixed: 2488424
This macro ENABLE_DP_HIST_STATS is needed for histogram information in
DP layer for both TX and RX. Add support for this macro.
Change-Id: Iffcb93c5e19d667bae35ce562c7ef12d063fb659
CRs-Fixed: 2492090
wmi_oem_response_event_id is only defined for TLV based
architectures. Current code returns an error if registration to a
particular event fails. But registration failure is not wrong
for legacy architectures, as event is not defined.
So do not check return value for error
Change-Id: Ia54431cee2958b59166394360a3fc961abad85ce
CRs-Fixed: 2492494
Add the tx_status enum in wlan_logging_sock_svc.h so that
enum can be used for MGMT TX status mapping in wma_mgmt.c
Change-Id: I5681e6fcc39704b6be18bc68b1042e0e6b53f590
CRs-Fixed: 2491787
With the addition of the pdev restart command to handle multivdev restart,
a placeholder is required at the mlme to hold pdev restart attribute.
Change-Id: I885bf71d0e7977452120714a659e839769ade33e
CRs-Fixed: 2492531
While processing stats event there is an invalid debug
log which is always getting printed and resulting in
confusing loging.
Remove this invalid log from the stats event handling.
Change-Id: I5c60bf73b6b01afce82ebf93e19254f6e302042f
CRs-Fixed: 2493076
Currently vdev response start timer logic is in
target_if layer and stop timer logic is in tgt
layer which is asymmetry.
So, move stop timer logic from tgt layer to
target_if layer for vdev start, stop and delete.
Change-Id: Ia06e2e6d90cf9c4366d654e016e2eeab8c2a0719
CRs-Fixed: 2442199
fix memory leak issue in tx mgmt ctrl payload tlv.
if any of the mgmt or pkt capture feature is turned on.
htt_t2h_msg is hold in mgmt_buf and not set to NULL on free.
which cause leaking next target to host nbuf.
Change-Id: I0d9e0194e51a21b348aadf747b8c9def5c245eda
Reduce the excessive loging incase dup detect and advance rx processing
to handle next ring entry.
Change-Id: I1d6e8aa28045ed12dd6d315169483ca56d2c6972
CRs-Fixed: 2489205
Use CONFIG_WMI_BCN_OFFLOAD instead of CONFIG_MCL to
include wmi_unified header file.
Change-Id: I0cc7a4958700c82c7d3e55c965ccac2451b64fd3
CRs-Fixed: 2490681
Remove note section from code comment and placed
in commit description for better readability.
Macro for sending data packets Changed from macro function
to static inline function due to error reported by
checkpatch for multiple use of same variable.
Change-Id: I0752cfff7502fabe0c2351a21a94cfac4625278f
CRs-Fixed: 2490594
Use proper macro instead of config_mcl to compile
the API target_process_bang_radar_cmd.
Change-Id: I3a2fca998d69f2a29243b9ecd2a290af9602d6c2
CRs-Fixed: 2490649
Deliver RX data to stack even if no peer found, this is
needed for LFR roaming case like eapol data.
Change-Id: Ic81f29993fb4542847bd076042a13de6e9f18173
CRs-Fixed: 2468082
Replace void * tgt_if_handle of objmgr psoc/pdev with
abstract type handles provided by target interface
Change-Id: I9e0ae991776daa0c25c4ad7b4e4dc022441318a3
CRs-Fixed: 2482708
Kernel maintains a list of bss and it adds/updates the bss
entries whenever driver informs it. When driver receives
beacon or probe response from any ap it informs kernel to
update the bss list and whenever it disconnects with the
AP driver unlink the bss in the kernel.
If the AP is hidden, when driver gets beacon from this
hidden AP it informs the kernel to update the bss list.
kernel add this entry to it's bss list with NULL SSID.
Now when driver receives probe response from this hidden
AP it again informs the kernel to update the bss list,
as this is probe response and ssid is not hidden,
kernel treats this entry as new entry and adds it to
its bss list and links this entry to the older hidden
AP entry (But still these are two entries for hidden AP).
When driver gets disconnect from the AP it unlink the
bss entry corresponding to this AP from kernel's bss
list, but since there are two entries for the same AP
as the AP is a hidden AP, driver should clear hidden AP
entry (Which was added as part of beacon) which is
not happening currently.
Now when AP moves from hidden to broadcasting SSID
in it's beacon, kernel drops this beacon entry as its
confusing because there is already a beacon entry with
hidden bss for this AP. During connection driver tries
to update the entry in the kernel and it fails as kernel
drops the beacon resulting into the connection failure.
To resolve this issue, whenever driver unlink the bss
entries from the kernel bss list unlink the hidden bss
entries also from the kernel's bss list.
Change-Id: I629475db8e8f10a6bc403314a984939e38d0a4da
CRs-Fixed: 2488955
As a part of regulatory update #29,MKK17 should support channels
until 5730MHz(including channel 144). But, it was missed in
regulatory update #29 and MKK17 supports channels only until
5710MHz(until channel 140).
Add channel 144 to MKK17.
Change-Id: Ic4b4c162f03a033b697764d65f4733b49e00c9c8
CRs-Fixed: 2489544
On MCL side, crash_on_send_peer_rx_reorder_queue_remove_cmd
causes a crash if command is sent by host. Currently no one
is using this API from MCL side and for non MCL this is No-OP.
Removing this API and CONFIG_MCL as from MCL side no one is
calling this.
Change-Id: I5393074913ccd6b39ca2e31e081783c4b614bd43
CRs-Fixed: 2490819
Idle restart needs to prevent system suspend and hence, add new
reason code for idle restart.
Change-Id: I15f7be551f00bd910a61080c087a8f85dd2fe7da
CRs-Fixed: 2490992
The host driver serialization module currently supports upto 4
commands in non scan pending queue. This is calculated at the
wlan_serialization_vdev_create_handler() as:
max_pending_cmds = (WLAN_SER_MAX_PENDING_CMDS /
WLAN_SER_MAX_VDEVS)
But in SAP case, if multiple STA sends deauth at the same time,
4 pending commands in non scan pending queue is not sufficient
and will result in only disassoc from the first 4 STA getting
honored.
The current host wlan driver supports 3 SAP mode and
2 STA vdevs amounting to a total of 5 vdevs supported.
So calculate the total non scan pending commands for
serialization based on the total peers supported for each
mode to fix this issue.
In SAP case, maximum 32 peer are supported and for STA case,
maximum 4 pending commands for serialization. So change the
max pending commands calculation as:
max_pending_cmds = (No. of sap modes supported * 32) +
(No .of STA modes supported *4 )
For MCL case the definition of WLAN_SER_MAX_PENDING_CMDS
will be moved to Kbuild.
For WIN case, the existing maximum count will be retained.
Change-Id: Iff1d9430b45e26812b600560b08e85e6040eafef
CRs-Fixed: 2483520
Change Idbde9d70c64bc131813f5789c0453c9b3736228b has added
a logic to parse a string to uint16 array, there is no test
case written for this in unit test case infrastructure.
Add a unit test case to verify the logic written with the change
Idbde9d70c64bc131813f5789c0453c9b3736228b.
Change-Id: I38d6a0d6003807de7f5ec654926bd75da8b0996c
CRs-fixed: 2478274
Initialize type specific data in process_tx_info
while processing full tx pktlog messages.
Change-Id: Icbdd20e7e4604f117912e5a4402f7aa5048e671e
CRs-Fixed: 2468471
In wifi_pos_parse_req(), payload sections of nl attributes ATTR_DATA and
ATTR_META_DATA are type casted to driver internal structures tAniMsgHdr
and wifi_pos_field_info respectively without validating payload lengths
which can lead to buffer overread if the payload lengths are less than
size of internal structures.
To fix this, avoid type-cast and return error if payload lengths of nl
attributes ATTR_DATA and ATTR_META_DATA are less than size of tAniMsgHdr
and wifi_pos_field_info respectively.
Change-Id: Ie9e3197f2cd3852b394e834991aa8d3a5b530d85
CRs-Fixed: 2471275
