[ Upstream commit 6bb73db6948c2de23e407fe1b7ef94bf02b7529f ]
Move the ssize check to the start in essiv_aead_crypt so that
it's also checked for decryption and in-place encryption.
Bug: 451939108
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Fixes: be1eb7f78a ("crypto: essiv - create wrapper template for ESSIV generation")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit dc4c854a5e7453c465fa73b153eba4ef2a240abe)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I675993b4640189861f0fe8a3f61a89c2f3821f19
commit 25daf9af0ac1bf12490b723b5efaf8dcc85980bc upstream.
Firmware that doesn't provide section headers leave both e_shentsize and
e_shnum 0, which obvious isn't compatible with the newly introduced
stricter checks.
Make the section-related checks conditional on either of these values
being non-zero.
Fixes: 9f9967fed9d0 ("soc: qcom: mdt_loader: Ensure we don't read past the ELF header")
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/all/ece307c3-7d65-440f-babd-88cf9705b908@packett.cool/
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/all/aec9cd03-6fc2-4dc8-b937-8b7cf7bf4128@linaro.org/
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Fixes: 9f35ab0e53cc ("soc: qcom: mdt_loader: Fix error return values in mdt_header_valid()")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250730-mdt-loader-shentsize-zero-v1-1-04f43186229c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 146449535
Change-Id: Iacfaffd1094a328aa884e08b99d42b45fe7e8c3f
(cherry picked from commit 64faf7d643
from the upstream 5.4 lts branch of linux-5.4.y)
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
This reverts commit 7b2a67322a which is
commit 65c7cdedeb3026fabcc967a7aae2f755ad4d0783 upstream.
It breaks the Android kernel abi and can be brought back in the future
in an abi-safe way if it is really needed.
Bug: 161946584
Change-Id: Ic50159039a689542f5d6d0e773464263e9d33be4
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 18c4c35782 which is
commit d34c54d1739c2cdf2e4437b74e6da269147f4987 upstream.
It breaks the Android kernel abi and can be brought back in the future
in an abi-safe way if it is really needed.
Bug: 161946584
Change-Id: I7c0e3af8cbc1963c3cb1949683dc0dddcb408dab
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 13ab9adef3 which is
commit 915470e1b44e71d1dd07ee067276f003c3521ee3 upstream.
It breaks the Android kernel abi and can be brought back in the future
in an abi-safe way if it is really needed.
Bug: 161946584
Change-Id: Ie5993940c58324e4a1632e61c31927c4fa133dae
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-----BEGIN PGP SIGNATURE-----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=FesN
-----END PGP SIGNATURE-----
Merge 5.4.300 into android11-5.4-lts
Changes in 5.4.300
usb: hub: Fix flushing of delayed work used for post resume purposes
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
NFSv4: Don't clear capabilities that won't be reset
tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork.
EDAC/altera: Delete an inappropriate dma_free_coherent() call
ocfs2: fix recursive semaphore deadlock in fiemap call
mtd: rawnand: stm32_fmc2: fix ECC overwrite
fuse: check if copy_file_range() returns larger than requested size
fuse: prevent overflow in copy_file_range return value
mm/khugepaged: fix the address passed to notifier on testing young
mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC buffer
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: nand: raw: atmel: Respect tAR, tCLR in read setup timing
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable()
igb: fix link test skipping when interface is admin down
genirq/affinity: Add irq_update_affinity_desc()
genirq: Export affinity setter for modules
genirq: Provide new interfaces for affinity hints
i40e: Use irq_update_affinity_hint()
i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
dmaengine: ti: edma: Fix memory allocation size for queue_priority_map
dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees
phy: ti-pipe3: fix device leak at unbind
soc: qcom: mdt_loader: Deal with zero e_shentsize
mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory
ALSA: firewire-motu: drop EPOLLOUT from poll return values as write is not supported
wifi: mac80211: fix incorrect type for ret
pcmcia: omap_cf: Mark driver struct with __refdata to prevent section mismatch
cgroup: split cgroup_destroy_wq into 3 workqueues
net: natsemi: fix `rx_dropped` double accounting on `netif_rx()` failure
i40e: remove redundant memory barrier when cleaning Tx descs
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
net: liquidio: fix overflow in octeon_init_instr_queue()
cnic: Fix use-after-free bugs in cnic_delete_task
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
power: supply: bq27xxx: fix error return in case of no bq27000 hdq battery
power: supply: bq27xxx: restrict no-battery detection to bq27000
mmc: mvsdio: Fix dma_unmap_sg() nents value
rds: ib: Increment i_fastreg_wrs before bailing out
ASoC: wm8940: Correct typo in control name
ASoC: wm8974: Correct PLL rate rounding
ASoC: SOF: Intel: hda-stream: Fix incorrect variable used in error message
usb: gadget: dummy_hcd: remove usage of list iterator past the loop body
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
serial: sc16is7xx: fix bug in flow control levels init
net: rfkill: gpio: add DT support
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active
ALSA: usb-audio: Fix block comments in mixer_quirks
ALSA: usb-audio: Avoid multiple assignments in mixer_quirks
ALSA: usb-audio: Simplify NULL comparison in mixer_quirks
ALSA: usb-audio: Remove unneeded wmb() in mixer_quirks
ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5
ALSA: usb-audio: Convert comma to semicolon
ALSA: usb-audio: Fix build with CONFIG_INPUT=n
usb: core: Add 0x prefix to quirks debug output
IB/mlx5: Fix obj_type mismatch for SRQ event subscriptions
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
can: peak_usb: fix shift-out-of-bounds issue
drm/gma500: Fix null dereference in hdmi teardown
i40e: fix idx validation in i40e_validate_queue_map
i40e: fix input validation logic for action_meta
i40e: add max boundary check for VF filters
fbcon: fix integer overflow in fbcon_do_set_font
fbcon: Fix OOB access in font allocation
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
i40e: increase max descriptors for XL710
i40e: add validation for ring_len param
i40e: fix idx validation in config queues msg
i40e: fix validation of VF state in get resources
i40e: add mask to apply valid bits for itr_idx
mm/hugetlb: fix folio is still mapped when deleted
Linux 5.4.300
Change-Id: I24b202860574c8b633ccc93f52ac4330e4ae51bf
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 7b7387650dcf2881fd8bb55bcf3c8bd6c9542dd7 ]
Migration may be raced with fallocating hole. remove_inode_single_folio
will unmap the folio if the folio is still mapped. However, it's called
without folio lock. If the folio is migrated and the mapped pte has been
converted to migration entry, folio_mapped() returns false, and won't
unmap it. Due to extra refcount held by remove_inode_single_folio,
migration fails, restores migration entry to normal pte, and the folio is
mapped again. As a result, we triggered BUG in filemap_unaccount_folio.
The log is as follows:
BUG: Bad page cache in process hugetlb pfn:156c00
page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00
head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0
aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file"
flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: f4(hugetlb)
page dumped because: still mapped when deleted
CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x70
filemap_unaccount_folio+0xc4/0x1c0
__filemap_remove_folio+0x38/0x1c0
filemap_remove_folio+0x41/0xd0
remove_inode_hugepages+0x142/0x250
hugetlbfs_fallocate+0x471/0x5a0
vfs_fallocate+0x149/0x380
Hold folio lock before checking if the folio is mapped to avold race with
migration.
Link: https://lkml.kernel.org/r/20250912074139.3575005-1-tujinjiang@huawei.com
Fixes: 4aae8d1c05 ("mm/hugetlbfs: unmap pages if page fault raced with hole punch")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ folio -> page ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eac04428abe9f9cb203ffae4600791ea1d24eb18 ]
The ITR index (itr_idx) is only 2 bits wide. When constructing the
register value for QINT_RQCTL, all fields are ORed together. Without
masking, higher bits from itr_idx may overwrite adjacent fields in the
register.
Apply I40E_QINT_RQCTL_ITR_INDX_MASK to ensure only the intended bits are
set.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[ Added missing linux/bitfield.h header for FIELD_PREP macro ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 877b7e6ffc23766448236e8732254534c518ba42 ]
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset.
Fixes: 61125b8be85d ("i40e: Fix failed opcode appearing if handling messages from VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55d225670def06b01af2e7a5e0446fbe946289e8 ]
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aa6908ca3bd1e713fd6cd8d7193a008f060bf7d9 ]
In Tables 8-12 and 8-22 in the X710/XXV710/XL710 datasheet, the QLEN
description states that the maximum size of the descriptor queue is 8k
minus 32, or 8160.
Signed-off-by: Justin Bronder <jsbronder@cold-front.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231113231047.548659-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 55d225670def ("i40e: add validation for ring_len param")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b2f5ef00e852f8e8902a4d4f73aeedc60220c12 upstream.
Commit 1a194e6c8e1e ("fbcon: fix integer overflow in fbcon_do_set_font")
introduced an out-of-bounds access by storing data and allocation sizes
in the same variable. Restore the old size calculation and use the new
variable 'alloc_size' for the allocation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1a194e6c8e1e ("fbcon: fix integer overflow in fbcon_do_set_font")
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15020
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6201
Cc: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org> # v5.9+
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://lore.kernel.org/r/20250922134619.257684-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a194e6c8e1ee745e914b0b7f50fa86c89ed13fe upstream.
Fix integer overflow vulnerabilities in fbcon_do_set_font() where font
size calculations could overflow when handling user-controlled font
parameters.
The vulnerabilities occur when:
1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount
multiplication with user-controlled values that can overflow.
2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow
3. This results in smaller allocations than expected, leading to buffer
overflows during font data copying.
Add explicit overflow checking using check_mul_overflow() and
check_add_overflow() kernel helpers to safety validate all size
calculations before allocation.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 39b3cffb8cf3 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access")
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: stable <stable@vger.kernel.org>
Cc: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250912170023.3931881-1-samasth.norway.ananda@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb79fa7118c150c3c76a327894bb2eb878c02619 upstream.
There is no check for max filters that VF can request. Add it.
Fixes: e284fc2804 ("i40e: Add and delete cloud filter")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa68d3c3ac8d1dcec40d52ae27e39f6d32207009 upstream.
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_validate_queue_map().
Fixes: c27eac4816 ("i40e: Enable ADq and create queue channel/s on VF")
Cc: stable@vger.kernel.org
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Kamakshi Nellore <nellorex.kamakshi@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 352e66900cde63f3dadb142364d3c35170bbaaff ]
pci_set_drvdata sets the value of pdev->driver_data to NULL,
after which the driver_data obtained from the same dev is
dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is
extracted from it. To prevent this, swap these calls.
Found by Linux Verification Center (linuxtesting.org) with Svacer.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Signed-off-by: Zabelin Nikita <n.zabelin@mt-integration.ru>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250918150703.2562604-1-n.zabelin@mt-integration.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c443be70aaee42c2d1d251e0329e0a69dd96ae54 ]
Explicitly uses a 64-bit constant when the number of bits used for its
shifting is 32 (which is the case for PC CAN FD interfaces supported by
this driver).
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250918132413.30071-1-stephane.grosjean@free.fr
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/20250917-aboriginal-refined-honeybee-82b1aa-mkl@pengutronix.de
Fixes: bb4785551f ("can: usb: PEAK-System Technik USB adapters driver core")
[mkl: update subject, apply manually]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17c8d794527f01def0d1c8b7dc2d7b8d34fed0e6 ]
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 51f3baad7d ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-4-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61da0bd4102c459823fbe6b8b43b01fb6ace4a22 ]
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-3-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1c7656fa717f29fac3ea073af63f0b9919ec9a ]
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.
This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:
memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
frame->data, frame->len);
Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 57e83fb9b7 ("can: hi311x: Add Holt HI-311x CAN driver")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-2-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c793afa07da6d2d4595f6c73a2a543a471bb055 ]
On R-Car Gen3 using PSCI, s2ram powers down the SoC. After resume, the
CAN interface no longer works, until it is brought down and up again.
Fix this by calling rcar_can_start() from the PM resume callback, to
fully initialize the controller instead of just restarting it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/699b2f7fcb60b31b6f976a37f08ce99c5ffccb31.1755165227.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85fe9f565d2d5af95ac2bbaa5082b8ce62b039f5 ]
Fix a bug where the driver's event subscription logic for SRQ-related
events incorrectly sets obj_type for RMP objects.
When subscribing to SRQ events, get_legacy_obj_type() did not handle
the MLX5_CMD_OP_CREATE_RMP case, which caused obj_type to be 0
(default).
This led to a mismatch between the obj_type used during subscription
(0) and the value used during notification (1, taken from the event's
type field). As a result, event mapping for SRQ objects could fail and
event notification would not be delivered correctly.
This fix adds handling for MLX5_CMD_OP_CREATE_RMP in get_legacy_obj_type,
returning MLX5_EVENT_QUEUE_TYPE_RQ so obj_type is consistent between
subscription and notification.
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://patch.msgid.link/r/8f1048e3fdd1fde6b90607ce0ed251afaf8a148c.1755088962.git.leon@kernel.org
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c428fce0b41b15ab321d8ede871f780ccd038f ]
Use "0x%x" format for quirks debug print to clarify it's a hexadecimal
value. Improves readability and consistency with other hex outputs.
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Link: https://lore.kernel.org/r/20250603071045.3243699-1-lijiayi@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0630a0b80c08530857146e3bf183a7d6b743847 ]
The recent addition of DualSense mixer quirk relies on the input
device handle, and the build can fail if CONFIG_INPUT isn't set.
Put (rather ugly) workarounds to wrap with IS_REACHABLE() for avoiding
the build error.
Fixes: 79d561c4ec04 ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506130733.gnPKw2l3-lkp@intel.com/
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250613081543.7404-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ca30a1b007d5fefb5752428f852a2d8d7219c1c ]
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: 79d561c4ec04 ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250612060228.1518028-1-nichen@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79d561c4ec0497669f19a9550cfb74812f60938b ]
The Sony DualSense wireless controller (PS5) features an internal mono
speaker, but it also provides a 3.5mm jack socket for headphone output
and headset microphone input.
Since this is a UAC1 device, it doesn't advertise any jack detection
capability. However, the controller is able to report HP & MIC insert
events via HID, i.e. through a dedicated input device managed by the
hid-playstation driver.
Add a quirk to create the jack controls for headphone and headset mic,
respectively, and setup an input handler for each of them in order to
intercept the related hotplug events.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-9-1a821463b632@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cea7425595697802e8d55a322a251999554b8b1 ]
Adding a memory barrier before wake_up() in
snd_usb_soundblaster_remote_complete() is supposed to ensure the write
to mixer->rc_code is visible in wait_event_interruptible() from
snd_usb_sbrc_hwdep_read().
However, this is not really necessary, since wake_up() is just a wrapper
over __wake_up() which already executes a full memory barrier before
accessing the state of the task to be waken up.
Drop the redundant call to wmb() and implicitly fix the checkpatch
complaint:
WARNING: memory barrier without comment
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-8-1a821463b632@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 231225d8a20f8668b4fd6601d54a2fac0e0ab7a5 ]
Address a couple of comment formatting issues indicated by
checkpatch.pl:
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-4-1a821463b632@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d02e48830e3fce9701265f6c5a58d9bdaf906a76 ]
Commit 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
inhibited pre-VMRUN sync of TPR from LAPIC into VMCB::V_TPR in
sync_lapic_to_cr8() when AVIC is active.
AVIC does automatically sync between these two fields, however it does
so only on explicit guest writes to one of these fields, not on a bare
VMRUN.
This meant that when AVIC is enabled host changes to TPR in the LAPIC
state might not get automatically copied into the V_TPR field of VMCB.
This is especially true when it is the userspace setting LAPIC state via
KVM_SET_LAPIC ioctl() since userspace does not have access to the guest
VMCB.
Practice shows that it is the V_TPR that is actually used by the AVIC to
decide whether to issue pending interrupts to the CPU (not TPR in TASKPRI),
so any leftover value in V_TPR will cause serious interrupt delivery issues
in the guest when AVIC is enabled.
Fix this issue by doing pre-VMRUN TPR sync from LAPIC into VMCB::V_TPR
even when AVIC is enabled.
Fixes: 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/c231be64280b1461e854e1ce3595d70cde3a2e9d.1756139678.git.maciej.szmigiero@oracle.com
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b6f56a44e4c1014b08859dcf04ed246500e310e5 ]
Since commit 7d5e9737ef ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737ef ("net: rfkill: gpio: get the name and type from device property")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d64c732dfc9edcd57feb693c23162117737e426b ]
Allow probing rfkill-gpio via device tree. This hooks up the already
existing support that was started in commit 262c91ee5e ("net:
rfkill: gpio: prepare for DT and ACPI support") via the "rfkill-gpio"
compatible, with the "name" and "type" properties renamed to "label"
and "radio-type", respectively, in the device tree case.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230102-rfkill-gpio-dt-v2-2-d1b83758c16d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: b6f56a44e4c1 ("net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 535fd4c98452c87537a40610abba45daf5761ec6 ]
When trying to set MCR[2], XON1 is incorrectly accessed instead. And when
writing to the TCR register to configure flow control levels, we are
incorrectly writing to the MSR register. The default value of $00 is then
used for TCR, which means that selectable trigger levels in FCR are used
in place of TCR.
TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2]
to be set. EFR[4] is already set in probe().
MCR access requires LCR[7] to be zero.
Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly
accessed instead because MCR shares the same address space as XON1.
Since MCR[2] is unmodified and still zero, when writing to TCR we are in
fact writing to MSR because TCR/TLR registers share the same address space
as MSR/SPR.
Fix by first removing useless reconfiguration of EFR[4] (enable enhanced
functions), as it is already enabled in sc16is7xx_probe() since commit
43c51bb573 ("sc16is7xx: make sure device is in suspend once probed").
Now LCR is $00, which means that MCR access is enabled.
Also remove regcache_cache_bypass() calls since we no longer access the
enhanced registers set, and TCR is already declared as volatile (in fact
by declaring MSR as volatile, which shares the same address).
Finally disable access to TCR/TLR registers after modifying them by
clearing MCR[2].
Note: the comment about "... and internal clock div" is wrong and can be
ignored/removed as access to internal clock div registers (DLL/DLH)
is permitted only when LCR[7] is logic 1, not when enhanced features
is enabled. And DLL/DLH access is not needed in sc16is7xx_startup().
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ s->regmap renames + context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d63c83d8eb922f6c316320f50c82fa88d099bea ]
Yunseong Kim and the syzbot fuzzer both reported a problem in
RT-enabled kernels caused by the way dummy-hcd mixes interrupt
management and spin-locking. The pattern was:
local_irq_save(flags);
spin_lock(&dum->lock);
...
spin_unlock(&dum->lock);
... // calls usb_gadget_giveback_request()
local_irq_restore(flags);
The code was written this way because usb_gadget_giveback_request()
needs to be called with interrupts disabled and the private lock not
held.
While this pattern works fine in non-RT kernels, it's not good when RT
is enabled. RT kernels handle spinlocks much like mutexes; in particular,
spin_lock() may sleep. But sleeping is not allowed while local
interrupts are disabled.
To fix the problem, rewrite the code to conform to the pattern used
elsewhere in dummy-hcd and other UDC drivers:
spin_lock_irqsave(&dum->lock, flags);
...
spin_unlock(&dum->lock);
usb_gadget_giveback_request(...);
spin_lock(&dum->lock);
...
spin_unlock_irqrestore(&dum->lock, flags);
This approach satisfies the RT requirements.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Fixes: b4dbda1a22 ("USB: dummy-hcd: disable interrupts during req->complete")
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: <https://lore.kernel.org/linux-usb/5b337389-73b9-4ee4-a83e-7e82bf5af87a@kzalloc.com/>
Reported-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
Closes: <https://lore.kernel.org/linux-usb/68ac2411.050a0220.37038e.0087.GAE@google.com/>
Tested-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
CC: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/bb192ae2-4eee-48ee-981f-3efdbbd0d8f0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7975f080d3557725160a878b1a64339043ba3d91 ]
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable [1].
Link: https://lore.kernel.org/all/YhdfEIwI4EdtHdym@kroah.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220308171818.384491-26-jakobkoschel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8d63c83d8eb9 ("USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 35fc531a59694f24a2456569cf7d1a9c6436841c ]
The dev_err message is reporting an error about capture streams however
it is using the incorrect variable num_playback instead of num_capture.
Fix this by using the correct variable num_capture.
Fixes: a1d1e266b4 ("ASoC: SOF: Intel: Add Intel specific HDA stream operations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250902120639.2626861-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b17d3724df55ecc2bc67978822585f2b023be48 ]
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f25 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4351ca3fcb3ffecf12631b4996bf085a2dad0db6 upstream.
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca7 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ab2f1c35669bff7d7ed1bb16bf5cc989b3e2e17 upstream.
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 236caa7cc3 ("mmc: SDIO driver for Marvell SoCs")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e451977e1703b6db072719b37cd1b8e250b9cc9 upstream.
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to the bq27000.
There is no need to backport further because this was hidden before
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Suggested-by: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c334d038466ac509468fbe06905a32d202117db upstream.
Since commit
commit f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
the console log of some devices with hdq enabled but no bq27000 battery
(like e.g. the Pandaboard) is flooded with messages like:
[ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf03 ("power: supply: bq27xxx: Retrieve again when busy")
Cc: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 025e87f8ea2ae3a28bf1fe2b052bfa412c27ed4a upstream.
When accessing one of the files under /sys/fs/nilfs2/features when
CONFIG_CFI_CLANG is enabled, there is a CFI violation:
CFI failure at kobj_attr_show+0x59/0x80 (target: nilfs_feature_revision_show+0x0/0x30; expected type: 0xfc392c4d)
...
Call Trace:
<TASK>
sysfs_kf_seq_show+0x2a6/0x390
? __cfi_kobj_attr_show+0x10/0x10
kernfs_seq_show+0x104/0x15b
seq_read_iter+0x580/0xe2b
...
When the kobject of the kset for /sys/fs/nilfs2 is initialized, its ktype
is set to kset_ktype, which has a ->sysfs_ops of kobj_sysfs_ops. When
nilfs_feature_attr_group is added to that kobject via
sysfs_create_group(), the kernfs_ops of each files is sysfs_file_kfops_rw,
which will call sysfs_kf_seq_show() when ->seq_show() is called.
sysfs_kf_seq_show() in turn calls kobj_attr_show() through
->sysfs_ops->show(). kobj_attr_show() casts the provided attribute out to
a 'struct kobj_attribute' via container_of() and calls ->show(), resulting
in the CFI violation since neither nilfs_feature_revision_show() nor
nilfs_feature_README_show() match the prototype of ->show() in 'struct
kobj_attribute'.
Resolve the CFI violation by adjusting the second parameter in
nilfs_feature_{revision,README}_show() from 'struct attribute' to 'struct
kobj_attribute' to match the expected prototype.
Link: https://lkml.kernel.org/r/20250906144410.22511-1-konishi.ryusuke@gmail.com
Fixes: aebe17f684 ("nilfs2: add /sys/fs/nilfs2/features group")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509021646.bc78d9ef-lkp@intel.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cfa7d9b1e3a8604afc84e9e51d789c29574fb216 ]
The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(),
which does not guarantee that the delayed work item 'delete_task' has
fully completed if it was already running. Additionally, the delayed work
item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only
blocks and waits for work items that were already queued to the
workqueue prior to its invocation. Any work items submitted after
flush_workqueue() is called are not included in the set of tasks that the
flush operation awaits. This means that after the cyclic work items have
finished executing, a delayed work item may still exist in the workqueue.
This leads to use-after-free scenarios where the cnic_dev is deallocated
by cnic_free_dev(), while delete_task remains active and attempt to
dereference cnic_dev in cnic_delete_task().
A typical race condition is illustrated below:
CPU 0 (cleanup) | CPU 1 (delayed work callback)
cnic_netdev_event() |
cnic_stop_hw() | cnic_delete_task()
cnic_cm_stop_bnx2x_hw() | ...
cancel_delayed_work() | /* the queue_delayed_work()
flush_workqueue() | executes after flush_workqueue()*/
| queue_delayed_work()
cnic_free_dev(dev)//free | cnic_delete_task() //new instance
| dev = cp->dev; //use
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the cyclic delayed work item is properly canceled and that any
ongoing execution of the work item completes before the cnic_dev is
deallocated. Furthermore, since cancel_delayed_work_sync() uses
__flush_work(work, true) to synchronously wait for any currently
executing instance of the work item to finish, the flush_workqueue()
becomes redundant and should be removed.
This bug was identified through static analysis. To reproduce the issue
and validate the fix, I simulated the cnic PCI device in QEMU and
introduced intentional delays — such as inserting calls to ssleep()
within the cnic_delete_task() function — to increase the likelihood
of triggering the bug.
Fixes: fdf24086f4 ("cnic: Defer iscsi connection cleanup")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
