Decoder base cycle requirement of B frames has increased to 80.
Also, updated cycle count requirement for Encoder HIER B usecase.
Change-Id: Iec1bee89be6bb6c18235c2903080025c312bef2d
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Revise VP9 decoder capabilities and limits to
match the updated Lahaina PRD.
Change-Id: I7a92c88b21e19ab44b43a0c829491f58aa1ce492
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Set chroma_qp_offset hfi to firmware only for client set cases.
Supported value: 0 & -12
If hfi not set, firmware proceeds with its own default value.
10-bit: default: 0
8-bit : default: Adaptive chroma_qp
Change-Id: I40262aae87b2a385c6cd7d60faa19b6adfe8b151
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Updated VSP base cycle entries for Shima to inline
with vperf.
Change-Id: I26e7a521434765b97cc1a508b714652d14adf2aa
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Revise internal timestamp data type from u64
to s64 in case of negative timestamps.
Change-Id: Ib026d504a08ce5ac67d1d962b671c37637761321
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Fix the incorrect VP9 decoder scratch buffer calculation
and match it with firmware definition of scratch buffer size.
Change-Id: Ie901082760d675153d1eb898cbe665cc6ad59bd1
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
1. Add a new EOS flag to denote EOS pending status;
2. Set all existed time stamps with EOS flag as true
after inserting EOS time stamp;
3. Ignore time stamp sorting to buffers with EOS pending
flag as true;
Change-Id: I72b041150973e2a28d1039c5f906fdb222a86081
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
[1] Only one vidc node is maintained, so "sku-index" entry is
removed in dtsi.
[2] In video driver, always read fuse value if efuse_data entry
is populated
Change-Id: I86b8c38f1e71491678b54a11783292e1281f90d3
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
1. Sufficient event should use fw min count for DCVS.
2. Input buffer count calculation is independent of Realtime/Non-Realtime.
3. Batching should be disabled if it is non-realtime session.
4. Removed misleading logs and changed buffer count logs to
convey the correct meaning.
Change-Id: Ieba6fc022549f5e767a833410ead5aa7fb52e14b
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Fix to skip time stamp store and fetch for buffers
with codec config flag.
Change-Id: I867db519c45751ef2dadef5a323c7a4ad2741385
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Replace the obsolete do_gettimeofday API with ktime API.
Change-Id: Id105d2c531f8b9aa3315800ab3312bc6a619b792
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
For less_or_equal check, need to meet all the
conditions when return true, not only one condition.
Change-Id: Icf103721596cdcb6a4a90e1def67f3151140db85
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
check for cvp support before any cvp
related operation.
CRs-Fixed: 2741030
Change-Id: I7a457608321f0aa5b93b6f62d7ceb76c0b00fb93
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
copy hfi buf req to hal buf req element by
element. Due to change in structure sizes,
memcpy may lead to memory corruption.
CRs-Fixed: 2741030
Change-Id: Ie4a3aeba7cac78af99355eb766a5ead755cf654b
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
Update power sequence by removing all resets during power down.
Change-Id: I88610e9c71a91a32332626bf6da88f0f64ed1c65
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
(cherry picked from commit 5cffae52eacaaf6b0698de06c11397339d904f35)
Fix p-frame count during intra-period setting for HEVC session without
layer encoding.
Change-Id: I796cac16fbb0538012f9fc97262e1877285e1803
CRs-Fixed: 2735233
Signed-off-by: Amit Shekhar <ashekhar@codeaurora.org>
Avoid adapting driver framerate to camera qbuf rate in superframe
enabled case to avoid setting incorrect hfr buffer timestamps.
Change-Id: I354e7517b9aeef7f1b01f33089b81bf7122e12e2
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
In steady state, the first entry in the linked list of timestamps is
always invalid. When adding a new timestamp entry, adding the
timestamp which is a duplicate of first entry leads to duplicate
linked list nodes. To avoid this, check for validity of an entry
before inserting duplicates to the linked list.
Change-Id: I47dd8fb06b9e4eb307605df6b0e2b352a2e263fe
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Need to check against v4l2 flag instead of
hfi flag.
Change-Id: Ib15974b1cc2ee23861b47425ebe21d25ff6dc694
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Fix uninitialized access issue with a few variables.
Change-Id: Ib79186e0b837ce1d020546c8a3436745c5d50532
CRs-Fixed: 2729628
Signed-off-by: Amit Shekhar <ashekhar@codeaurora.org>
As per the recommended configuration, the max spec
for running an encode session in high quality is
1080p@30. Updating the same.
Change-Id: I649790bbf8a3c2264bfe6c36769717df2d2f2a55
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Currently video has multiple nodes in dtsi to support/limit
sw capabilities via sku-index. Mostly restriction comes in
terms of allowed-clock-rate. So created static entries in
platform.c to configure clocks based on plaform fuse value.
So that single vidc dtsi node is sufficient and there will
not be a probe defer/failure during bootup.
For ex. Shima supports 3 sku's.
AB - max 364.8 MHz - sku_version(1) - picked from dtsi(default sku)
AA - max 201.6 MHz - sku_version(2) - clock_data_v2
AC - max 444 MHz - sku_version(0) - clock_data_v0(no fuse)
Single vidc node - "aa00000.qcom,vidc"
Change-Id: I870f1e3a24c0cbfdd92c537d3e40c4cf5400326d
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Update min resolution support from 128x128
to 96x96 for decoder.
CRs-Fixed: 2724675
Change-Id: I230d3c5fbdc1d476a634160de30b20e207a5f315
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
qbuf ioctl acquired bufq[port].lock in one thread and flush
call acquired registeredbufs.lock in another thread. So
thread-1 is waiting for registeredbufs.lock & thread-2 is
waiting for bufq[port].lock i.e leading to deadlock. So
added change to avoid above mentioned deadlock.
Change-Id: Ie21984fdb562ca7a09f801f036f3a78429ceab94
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Currently, total buffer size across pipes is
aligned with 256. It should be per pipe usage
aligned with 256.
Change-Id: I389f2a0539bb04b9d038fe44122da70690c43466
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
