Set system state in hif ctx to suspend or resume on
system suspend and resume respectively.
Change-Id: If1904a4fe5c861deed1b35071be10cb8cc8d6407
CRs-Fixed: 2899520
In Extended capabilities sent in assoc request, TWT capabilities
are included so 10 octets are present, but in set ie command,
only 9 octets are included.
Also the Beamformee STS <= 80Mhz capability is not populated
per band based on firmware advertised capability in the
set per band ie command, so there is mismatch in this field in
initial association and roaming.
Populate the missing bytes in IE sent via set ie command to
firmware, also update the beamformee sts capability per band.
Change-Id: I2d191cedface935970ed4f974c09c3b4c5acd477
CRs-Fixed: 2891017
TDLS teardown happens in high throughput
scenario as rx pkt count increment API
"tdls_update_rx_pkt_cnt" is not called
if hdd_is_current_high_throughput API
returns TRUE. The reason for this is due
to high cpu cycles consumed by
tdls_update_rx_pkt_cnt API.
As part of fix optimize tdls_update_rx_pkt_cnt,
tdls_update_tx_pkt_cnt API's for high
throughput scenario. In high throughput
scenario mostly the use-case is to increment
the pkt counter so move that logic to
the top of the API's.
Change-Id: I4eb0da3571c45b5ee91e051e251158af15f73973
CRs-Fixed: 2888746
Currently, P2P mode is not supported in 6GHz mode
Add P2P mode in policy_mgr_is_6ghz_conc_mode_supported
API to support P2P mode in 6GHz mode as fix this.
Change-Id: I2e160641c1784dbbd592b237da6b38929f33abbe
CRs-Fixed: 2896291
Update reject ap type to string from int value while
dumping blacklisted bssid for debugging purpose.
Change-Id: I2a12949e9e46f6fad32cc54ac975dfbfbdba88ab
CRs-Fixed: 2857907
Add new ini "enable_twt_24ghz" to enable/disable host triggered
TWT in 2.4Ghz connection. Check this ini value in TWT get
capability. The userspace will query the self capability before
triggering the host TWT.
Change-Id: I3544de89f438fc526f8a2554c6aeebcd25d6c415
CRs-Fixed: 2904775
When TDLS connection is made in 160 MHZ
for 11ax staions, the MCS rates for the
same aren't updated correctly.
Also, MCS rate can change in case the
connection between both stations is made
with AP operating in NSS 1x1, as there is
a check in lim_populate_he_mcs_set which
will disable MCS rates corresponding to
nss > 1x1.
To fix this, copy 160 MHZ mcs from the
staion parameters which gets updated in
change station. Also, use nss parameter
which is passed by lim_populate_he_mcs_set()
in the check which was used to disable mcs
rates corresponding to nss > 1x1. Thus,
peer station nss will be used to
determine whether to disable or not.
Change-Id: I23079aed3795202e6ae32583a220c1ed3227c1dd
CRs-Fixed: 2904540
Firmware sends TWT teardown with status code
WMI_DEL_TWT_STATUS_CONCURRENT_SESSION when a concurrent connection
is established. Currently host driver drops this event as the
status code is not WMI_DEL_TWT_STATUS_ROAMING_INITIATED or
WMI_DEL_TWT_STATUS_PEER_INITIATED.
Add support to handle TWT teardown event with
WMI_DEL_TWT_STATUS_CONCURRENT_SESSION status code.
Change-Id: I408ba960924b4daa1ca4f8337d7e0d1ce52c5fd9
CRs-Fixed: 2899563
API sap_indicate_radar needs to return sap current
frequency instead of channel.
Change-Id: I62a4aae0604b11587a14d17d4c641262b8019ab3
CRs-Fixed: 2900489
Some SAP channel switch requestor will wait for channel switch
completion. Set sap qdf_event after sap hdd callback recevies
eSAP_CHANNEL_CHANGE_RESP.
Change-Id: I15e0733ac2bef6af55e02ff18f94cc2c86eb9811
CRs-Fixed: 2905918
Some legacy Helium firmware doesn't support SAE roaming, but btm cap is set
in associate request of DUT, then connected SAE AP thinks DUT supports btm,
AP will send btm request to DUT, DUT triggers roaming, but fails and
disconnects from current AP, users will complain this unexpected
disconnect.
Change-Id: Ife9860addef6898a518618f555158e7888ac74db
CRs-Fixed: 2884694
When host driver receives RSO_STOP from userspace, HDD sends the
RSO_STOP down to lower layers and starts a wait for response upon
success status.
Below layers(connection mgr/CSR) ignore the RSO_STOP request and
return success if the current state is not RSO_ENABLED or
IN_PROGRESS. This keeps the HDD waiting for response and a timeout
happens after 2 seconds.
So, wait for RSO stop response only if roaming is in enabled state
to avoid this wait and timeout.
Change-Id: I3ed81c5da26ebe05d17fc37dc43665f1f7b7c8b2
CRs-Fixed: 2901494
This is to enable feature for detection CE tasklet
scheduling delay and credit response delay issue.
Change-Id: I659aa23eabaa28bfb11051bf15e0343c94061b86
CRs-Fixed: 2874867
Currently, DUT is able to detect the radar event
causing channel switch even if disable dfs channel
switch ini is set. Due to this, there is a chance
of unwanted CSA.
Adding check for disable dfs channel switch ini before
detecting the radar. If gDisableDFSChSwitch = 0 then
detect the radar event else ignore the radar event.
Change-Id: I977d93e47ee35026662d55a8e292c8790ddc7d31
CRs-Fixed: 2905871
Debug change to crash if there is a mismatch in number of
connections and disconnections
Change-Id: I1bb9cac331c0cb491a0ba761a78969537185e414
CRs-Fixed: 2870628
This function call is not needed because the capabilities
are being sent post vdev start correctly. The call here sends
the capabilities incorrectly at a later time so the good
values are overwritten.
This reverts change I32af660724cfaecfe59da153fea9f98d24b0d4cb.
Change-Id: Ie57a598f1055ee6a3d5a5f9cd353724dc620ab1d
CRs-fixed: 2905402
Currently, Host sends classifier type and classifier
mask part of TCLAS Mask OPIE only with tag length of
2 bytes.
As per spec tag length for TCLAS Mask OPIE should be 18.
Ext Tag: TCLAS Mask
Ext Tag Number: TCLAS Mask (89)
Ext Tag length: 18
Classifier Type: 4
Classifier Mask: 0x5f
Reserved:00000000000000000000000000000000
Fix is to add a reserved parameter in TCLAS Mask OPIE
of length 16 bytes and set it to NULL.
Change-Id: I54cd896a4ffad16581c14fc254575bcec8e6f6d7
CRs-Fixed: 2822616
In TWT status query, the driver fills the TWT info frame enabled
flag if TWT info frame is disabled. This gives wrong information
to the userspace.
Set the TWT info frame flag appropriately if info_frame_disabled
flag is false.
Change-Id: I319da5aacaec792090c0eca05d2a4be8b280e3e0
CRs-Fixed: 2902548
Reduce the log level alloc failure since it is not fatal. Log the
requested size of memory instead of last ring size found in the
case of alloc failure.
CRs-Fixed: 2894342
Change-Id: Idfb0eec7421e4568008517e35b2fb928f09b6818
If the WLAN driver stops sending up beacon information
due to other WIFI operations (like scan and disconnection),
Driver must send pause indication to wpa-supplicant with
reason code defined in enum
qca_wlan_vendor_beacon_reporting_pause_reasons.
Currently, host sends invalid pause reason in case of
scan.
Fix is to send proper reason code in pause indication
in case of a scan.
Change-Id: Id99e5a29be09fbde2c23908ab1f85d40ca3d74b8
CRs-Fixed: 2890110
In target_if_register_mgmt_data_offload_event(), check NULL value of
wmi_handle before it's used by wmi_service_enabled()
Change-Id: Iea51c59770258fd10468bb439f559094b563851f
CRs-Fixed: 2900533
when the worker thread executes wma_data_tx_ack_work_handler()
as part of driver load/unload, driver frees ack_work but dosent
reset to NULL which results to double memory free in wma_stop()
The fix is to make sure to flush this work and reset to NULL
before the wma_handle gets freed.
Change-Id: I4f56db87256b0f8828c00a2e70158cd76afe1ee0
CRs-Fixed: 2895664
Add support to allow TWT setup re-negotiation for the existing session.
If the setup request is received:
- before the host driver receiving the setup response event from
firmware for the previous setup request, then return -EINPROGRESS.
- after the host driver received the setup response event from
firmware for the previous setup request, then setup_done is
set to true and this new setup request is sent to firmware
for parameter re-negotiation.
CRs-Fixed: 2897896
Change-Id: I4d0cc5dac8d569a2e57c70ae6896ad1a24937597
cfg80211_get_chandef_type supports till NL80211_CHAN_WIDTH_40. Any
chan width more than NL80211_CHAN_WIDTH_40 can be treated as
NL80211_CHAN_HT40PLUS. __wlan_hdd_cfg80211_start_ap has the same
logic in-place.
Change-Id: I70166faf16730128039e4e48d9e90aefb1674977
CRs-Fixed: 2717615
Add big data stats as part of QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO
vendor command reply, if current state is disconnected.
Change-Id: I84dc1f9901be17ea7b2bd6aecc7bec4c19e77202
CRs-Fixed: 2876395
Currently, In twt setup command, driver set the
TWT command_in_progress before adding the dialog_id
in TWT context. Due to which, set active command
fails because the dialog id was not added to the
twt context. So the add dialog command response is
getting dropped at sme.
Set the TWT command_in_progress after adding the
dialog_id to TWT context.
Change-Id: Ic2c7e23720e2bc9f5a6737ba2f1dc4b1356dc179
CRs-Fixed: 2897736
