sgm7220 vdd use L21A, when device booting-up,
the L21A will be pull down that make sgm7720 ic power-off and hole the I2C bus.
Change-Id: I3d07c336abf6b937ad1267764baf96bbfe04632d
Signed-off-by: Yiqiang Feng <fengyq4@Lenovo.com>
Reviewed-on: https://gerrit.mot.com/2219999
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
version:12
1. Modify the scanning frequency of PH0 and PH2
2. Change the triggering threshold of PH1
Change-Id: Idf4c8880c75956cea7f501096628cda2d4265602
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2214964
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hongshu Lou <louhs1@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
update the cw2217 gauge parameters for shutdown voltage @~3.4V .
Based on the test results, use Jiade battery, the shutdown voltage is about 3.4V.
Change-Id: I35e902fdd50a8674d95017ffa6fde4f06c802bf0
Reviewed-on: https://gerrit.mot.com/2213596
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Submit-Approved: Jira Key
Config bq25960_master and bq25960_slave
for miami .We will use them when android system
insmod bq25980_mmi_iio.ko.
Change-Id: I70044c7c417a527158941430e8879446b814a569
Signed-off-by: wanggc6 <wanggc6@motorola.com>
Reviewed-on: https://gerrit.mot.com/2211633
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Submit-Approved: Jira Key
Modify:
-Update the dtsi initial code for optimizing the screen glass GIP timing.
-Effection:
-It will occur the problem which the top dark line when extreme
and heavy load are encountered.
Change-Id: I3b1626106d6c801e9e23e39a83cdf70ef5a0a3fc
Reviewed-on: https://gerrit.mot.com/2212717
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- set nt36672c pwm to 11bit
- set backlight max current to 23mA
- set sm5350 default brightness to 1810 to avoid brightness change
when boot.
Change-Id: I88a23f10c751efdc2bdMontanafa0800bcfd48b6ff8d
Signed-off-by: wangyq13 <wangyq13@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2207193
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shanshan Dai <daiss1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
- Since now touch can't support for tianma v2, add this config
and make touch can match the tianma v2 display.
Change-Id: Ia33537f30c79cc35dfa93d05160ec43d4ef5f125
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2205779
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
There is no HW ILIM R in Rhode5G HW Board
Disable HW ILIM by reg BQ2589X_ENILIM_DISABLE ,
and config it w/ DTS in rhode5g charging dts
Change-Id: Ia795d4bf63ba9a69bf91842e2e4e59caee54223f
Reviewed-on: https://gerrit.mot.com/2204336
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Submit-Approved: Jira Key
details:
1."qcom,leica-used-i2c" is used for PMIC over i2c use case to skip the BW vote.
2. We rm se8 and set it just for se7 to verify the LDO used by camera.
Change-Id: I14dd200ebd64e1fdd277c581a4535998ff269472
Signed-off-by: weimh1 <weimh1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2204672
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhihong Kang <kangzh@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
Get the new OP manual from KP at 2022.02.23.
Add OD code for tianma nt37701 6.55 inch panel.
Change-Id: I2205db2212c54882835977afb5c941cadce5fc6b
Signed-off-by: houdz1 <houdz1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2199855
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
This platform don't have mmi_battery for 33W, we need change it to
battery power supply.
change max charger icl to 300ma when charger pump enable.
Change-Id: Ibbef411b53a47e305134d75217821c8d58e473df
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2200417
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lei Chen <chenl18@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When we use external LDO for power supply, we need to add the parent
I2C device to critical devices list to keep clock on to avoid deadlock.
Change-Id: I745cdd6fbed0ef885d57b1a7775c6ef792babbed
Signed-off-by: Xiaofeng Wang <wangxf32@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2200017
Reviewed-by: Pengfei Qiao <qiaopf1@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Shuo Wang <wangsh18@motorola.com>
Reviewed-by: Xingyun Fu <fuxy7@motorola.com>
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key
- Since now we don't need to support 1st tm touch panel any more,
therefore remove it.
Change-Id: I3765bf7f12437ffba06408db873acdd9f997360a
Signed-off-by: wengjun1 <wengjun1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2193954
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dezhen Hou <houdz1@motorola.com>
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Submit-Approved: Jira Key
patch-version: 20220212_00
1.fix The first time the battery be inserted, the power display is low
2.reduce the time of temperature update
3.enable delay-shutdowm feature to set showdown voltage to 3.4v
Change-Id: I96d88ce6e4d475a02005234f42a0f4943184bb94
Reviewed-on: https://gerrit.mot.com/2192337
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
When the OTG is connected and discharged with high power consumption,
the temperature rise exceeds 3 degrees, so it is necessary to modify
the OTG discharge current to 1.2
Change-Id: I971395e6dd8d89e5905f7527339e0066ae76ec2a
Signed-off-by: wutao <huaqin89@motorola.com>
Reviewed-on: https://gerrit.mot.com/2191032
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
