Enhance debug information related to scan results
like adding SSID and time stamp of beacon in logs
Change-Id: Ib85dffff39d0db69a695e8167b6a221b51ef7d45
CRs-Fixed: 1013236
All the regulatory and channel management functionality
moved to CDS.
Cleanup the SME redundant functionality related to channel
parameters generation and update all the code references
to CDF API's
Change-Id: Iaf4e15b4ebb7107d8bbf7a54e42f9ea9358dcdaf
CRs-Fixed: 994562
Currently the HDD code uses a variety of logging APIs. In qcacld-3.0
HDD should converge on a unified set of logging APIs. Update
wlan_hdd_stats.c to use the unified set of APIs.
Change-Id: I32c2bc3755b42693947a38808e510683b9477b44
CRs-Fixed: 937687
Initialize bad peer tx control data structure in WMA,
send down the initial configuration info to fw and
configure the peer status update setting in the tx_rx module.
CRs-Fixed: 975526
Change-Id: Ib380e10a0b343b6a8f9c2c0bf6d6dd602d2601c5
Add tx schedular module, tx classify module within the data SW,
tx frame queues logging, group credit support and
send-recieve tx frames instance for HL system.
CRs-Fixed: 975526
Change-Id: If1655d4d832f88e565ab946ef9e9719f256ab7b1
Add support for HTT instance creation, initialization and
deletion, Host -> Target and Target -> Host HTT messages
exchange, receive and transmit aspects of HTT.
CRs-Fixed: 975526
Change-Id: Ie66a83b6efe216df192b033c9d137a93fdce688f
In Kernel commit 3b06d27 ("cfg80211: Add multiple scan plans
for scheduled scan")
The interval in the sched_scan plan request is changed to second.
Driver needs to do the conversion to msec before set to firmware.
Also, driver can only support one sched_plan so far, so set this
back to wiphy and adds sanity check when request comes to driver.
Change-Id: Id725f2726e1caafe48c6b76d59a24f71ffa01af6
CRs-fixed: 1029203
qcacld-2.0 to qcacld-3.0 propagation
Calculate and add wlan phy mode for each channel in OEM channel
info response.
Also send ANI_MSG_PEER_STATUS_IND indication for STA mode when
STA gets connected.
Change-Id: I91363e90698cabda72028135eb7fe9adeb1fbc86
CRs-Fixed: 1007004
Fix calculation of sec_ch_offset. Also fix the check for
HT40 flag to calculate the channel BW. Also fix check for
secondary channel.
CRs-Fixed: 1022025
Change-Id: If37780ea64698ab616131a550cd877368c56faa6
Propagation from qcacld-2.0 to qcacld-3.0.
Add new service WMI_SERVICE_MARK_FIRST_WAKEUP_PACKET
Change-Id: I427fef8d8f2503c52d511fdae58fe410420e67a0
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
WMI changes for 11AX related BSS parameters
Extend the WoW wake event bitmap
Change-Id: I68367a8d688cdc9f85efe01a7c48856c8bab7220
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Define 2 sub-CCKM auth types
Deprecate WOW_NAN_RTT event and reason, and use their values
for WOW_OEM_RESPONSE
Change-Id: I0db10a599f4bbbdf23e5968fa5dab59b722efa30
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Fix union in WMI_MAC_PHY_CAPABILITIES
WMI changes to control transmit power for beacon frames
Change-Id: I4acd731ec8850766d4d47715ff78b813281d0b6a
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Vdev level rx filter of from-ds / to-ds / no-ds / ta / ra
frames.
Change-Id: I63ee1aeb2eba793e3a06c2632f43ea044ba33422
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Merge WMI_VDEV_VOW_ENABLED flag
Add a new config to set preferable audio during WLAN connection
Change-Id: I86ed461a5d3d6d7f48e5ce2eb9370771a619d667
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0
Add dbglog IDs for ARP and DHCP packets
WMI CMDID for dbglog time stamp sync
Move reason code from wmi to nan_msg.h
Change-Id: I2e6e837fade375ef86c0c4247490b44ec502be1b
CRs-Fixed: 865207
Dwell time can be modify based on channel congestion per scan
request.
Add changes to enable firmware to use scan control flag and
select dwell time optimization algorithm based on ini values.
Change-Id: Iea3de57c1b7d087442e4b8984b4184d24bb8c930
CRs-Fixed: 994443
qcacld-2.0 to qcacld-3.0 propagation
Currently for diag event EVENT_WLAN_STATUS, diag
structure only allocates 6 bytes for ssid, though
ssid can be upto 32 bytes.
Also for diag event EVENT_WLAN_SECURITY, event id is
filled as PTK and GTK req/rsp for unicast and broadcast
req/rsp. PTK,GTK request doesn't make sense for wep case.
As a part of change, increase ssid size to 32 and replace PTK,
GTK req/rsp event id with Unicast, Broadcast req/rsp respectively.
Change-Id: I5aad1875262dd73878cc8393d09de1b23953d3a2
CRs-Fixed: 921847
Set the correct link state in join failure processing so that
WMA processes the request and sends the vdev stop when the join
failure happens.
Change-Id: I4e5ddcbd7e7b2b0141904410adb66f228dab0046
CRs-Fixed: 1020982
Disable FEATURE_MEMDUMP in Kbuild.
FEATURE_MEMDUMP should be redesigned appropriately for
cld-3.0. Disable this feature until implementation is
complete.
Change-Id: I3190414ff32d8a75b07c2c311e257f4d388ef26d
CRs-Fixed: 1026747
Fix out of bound memory copy by allocating buffer for
required size.
When WMA structures are converted into wmi_unified_param
structure, required memory was not allocated and hence
invalid memory was referenced resulting in stack corruption.
Change-Id: I868300cba9326b0146d3afadc9fef6337877d58d
CRs-Fixed: 1024437
Revert the change merged while adding 160MHz support.
RM 5.0 FW was not handling phymode VHT20/40 in 2G correctly which
was resulting in an assert. This revert will now enable host to
associate in VHT20/40 modes in 2G. This change will revert
the Change-Id: I7e7f1a9c1ff82a567f278987dbbe14c5c8b9bb2e
Change-Id: If0f8fb71413e0aeb5d355c5bbb1f0626a18b8d6f
CRs-Fixed: 1014267
Datapath changes for WiSA specification.
- Multicast packets with 50000 as destination
port should go at 6Mbps.
- Multicast packets with 50001 as destination
port should go at 24Mbps.
Change-Id: Ic219f58f3e8b2f6863a275928429153defe63b5a
CRs-Fixed: 1010412
Enhance DPTRACE to support RX path and
add support for live mode.
Live mode will print info in kmsg and
log it in buffer as well.
To enable live mode use below command.
iwpriv wlan0 dump_dp_trace 1 0
Change-Id: Id309a4d75cec93654b4acac51e5be42eae7f0b35
CRs-Fixed: 1008087
Add ini parameter and feature flag for
DPTRACE to enable/disable as per requirement.
Change-Id: I80db65adb7b8e82d5ea75cceac742fd229d7a2b5
CRs-Fixed: 1008087
HS20 Indication element parsing is added to indicate
release number of the HS20 passpoint that is present
in Hotspot configurations.
Change-Id: I8671d569d3809ebe5da7233ec862ae2569f5c109
CRs-Fixed: 1019592
PLD stands for platform driver. It is a interface between CLD and
CNSS/ICNSS. It hides the CNSS/ICNSS APIs from CLD and provides a set
of common APIs.
Other modules should include pld_common.h if they want to call PLD
APIs.
Change-Id: I7591761d2a2be0e22fcad13a504e9fe5f92b9608
CRs-Fixed: 1015316
OEM's has provision to update cnss platform driver with the mac address.
Modify wlan functional driver to query cnss platform driver for the mac
address.
If the cnss platform driver is not populated with valid mac address, driver
will fallback to use the existing approach to update mac address.
Change-Id: I0b4bb53047eba3af8b98aadfae22974558153cb5
CRs-Fixed: 985585
Refactor WMA data commands to remove dependency of WMA header files
in common wmi layer.
Change-Id: I48978e51ca6bd4416420ee66746d5bfe7adae3c9
CRs-Fixed: 1008872
Include pld_common.h in pld_internal.h as it uses data structures
defined in pld_common.h.
CRs-Fixed: 1022636
Change-Id: I17f8abfbec08b620be5af677e1599554c5fc7ea6
Provide common functions of adding/deleting dev node from PLD
global context. These two APIs should be called in probe/remove
callback functions.
CRs-Fixed: 1023650
Change-Id: Iff8157ab4396266ffb013700076d4107a3a21566
It is not flexible to call CNSS/ICNSS APIs directly in pld_common
as PCIE and SDIO share some CNSS APIs. It will introduce "duplicate
definition" errors when SDIO is added. Hence, add wrapper functions
for all used CNSS/ICNSS APIs.
CRs-Fixed: 1022778
Change-Id: I6a38434cfa99fc47543e995dd82b7d8ddc4453a7
Add CONFIG_PM flag for PLD pcie suspend/resume as it is not needed
in other platform when CONFIG_PM is not defined.
Change-Id: Iab04d15c81cbb94ccbdeb9be2b00fa069a421a86
CRs-Fixed: 1014363
Change unsigned long to uint64_t while updating intra bss forwarded
packets count to make sure that the assignment is compatible for all
architectures.
Change-Id: I6bc0e2d7524c117ce199b4a373f541fd06fc9ef8
CRs-Fixed: 996735
