Commit deca272425 ("USB: Fix compilation errors with
host stack disabled") was added for checking if USB_CONFIG
was enable only then go for registering the host notifier.
However, this should be CONFIG_USB instead of that.
Since USB_CONFIG is not defined anywhere it will take it
false and the host notifier will never be registered.
Fix this by correcting the typo to CONFIG_USB.
Change-Id: I99b2224e1973116e3001a5fbb5e1a569bdae2105
Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org>
Add support for the RTC peripheral found in PM5100
PMIC chips.
Change-Id: Ia2a0052fdc5b07e371e67dc93d45cf47776e9690
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Remove reserved-memory free operation perform after successful
copy log into driver buffer which may lead to boot failure.
Change-Id: I8833eb1d2ab0d10c88c6904f55f99cd7ada8ccb5
Signed-off-by: Vinay Sudra <vsudra@codeaurora.org>
Add master and slave ID constants for all Qualcomm Technologies, Inc.
direwolf interconnect providers which consumers can use to set bandwidth
constraints and find paths in the NoC (Network-On-Chip) topology.
Change-Id: I2e579dfacfddc618d8f59cae3686fca79f11ada0
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add the clock-ids for global clock controller driver for clients to be
able to request for the clocks.
Change-Id: I02c757b7b87b59f554f2b7138a3b99f99eedf4ba
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Add the clk id for GCC_USB2_PRIM_CLKREF_CLK in GCC header file
for MONACO.
Change-Id: I9ba826e964cfd4837ba1ece7c182496e6d16a965
Signed-off-by: Saurabh Sahu <sausah@codeaurora.org>
Add ipc logging support so that the essential log information can
be stored and looked upon especially when dynamic_debug log
filter is not set. This is useful for debugging.
Change-Id: I33c8eb1733ab1ecc541abb86f4f351ce9c8ff394
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
The sysfs fallback mechanism is enabled if direct filesystem
lookup fails, so always use firmware_request_nowarn() instead
of request_firmware() to avoid unnecessary warning logs. Driver
will only check for return code of the API.
Change-Id: I3bdbd23d6e23384bfcb7dc2fa32712fc5af79d03
Signed-off-by: Yue Ma <yuem@codeaurora.org>
NTN3 switch requires register access over i2c when PCIe link
is not up. Add i2c control interface for a i2c client driver.
This i2c control interface registers with a i2c client driver
and provides client specific callbacks for read, write, reset
and register dump operations.i2c control interface can support
one i2c client per root port.
Change-Id: I9e5f91cab4fd2bb2c6274ad0317fad4279db6958
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Both ethernet and USB need a way to coordinate usage of the tightly
coupled memory (TCM) region in the llcc. To this extent, provide a manager
for this region which can map this region for the kernel and provide
information for using it to clients, while also ensuring that
only one client can use the region at a time.
Change-Id: I57c02b1be6135fb9d93e638959084d0d5db48500
Signed-off-by: Melody Olvera <molvera@codeaurora.org>
This reverts commit 361b8db1ed, reversing
changes made to 3008930db1.
Change-Id: If821c691a7059a38f47ffe20a08bc9001f6a9690
Signed-off-by: Vinay Sudra <vsudra@codeaurora.org>
Add notes to disable below two options for perf build of SDX65:
CONFIG_SLUB_DEBUG
CONFIG_DEBUG_PREEMPT
Change-Id: Id6f22826aecec3d2f35cbe9b34e496cd24804202
Signed-off-by: Yu Tian <yutian@codeaurora.org>
Add trace points with TRACE_EVENT() inside the HAB
message send and receive paths. These tracing events
could be switched on and off w/ the standard ways.
When they are on, the tracing events could include the
MPM physical timer's counter values(useful for performance
profiling) if the timer is available.
Change-Id: Ide02263f85a61c88bf1aa8f464512756ae17d7a9
Signed-off-by: Yong Ding <yongding@codeaurora.org>
Do not allow configuration access request to certain BDFs.
This is required for PCIe switches, unable to respond to
configuration access request to certain supported BDFs.
Without filtering, such BDFs are causing system bus hang
or enumeration failure of downstream ports of switch.
Change-Id: I4c4fa5cc4921dfe0217e05aaad4600abebcacd2b
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Add IRQF_NO_SUSPEND flag while requesting interrupt for
smd edge so that any transfers during suspend noirq stage
can be done.
Change-Id: If821440fbab35f5a39484fbcad1994d54dff41d6
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
