By default, the system firmware enables the mpm wakeup functionality
of all the supported GPIOs. However, certain usecases demand that
this capability be disabled on certain gpios. Hence, provide a
generic interface to disable the GPIOs as needed.
Change-Id: I147629e0126b2eb41c645de03958ef480fd5d7d0
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Update pinctrl driver for Yupik, to match latest
configuration.
Change-Id: I067fb20535dd144bf07f1253dbf9b498de8bb123
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Add master and slave ID constants for all Qualcomm Technologies, Inc.
SCSHRIKE interconnect providers which consumers can use to set
bandwidth constraints and find paths in the NoC (Network-On-Chip)
topology.
Change-Id: I69fdeddf756a12aa17868ddf7130243d5852d978
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Since PCIe remap window register access and actual PCIe device
register access may go through different NoCs, read it back after
writing to remap window register to make sure it has taken effect.
This is able to avoid NOC errors when accessing the actual device
register which the remap window value applies to.
Change-Id: I65848758250fb9e6e1cbe513932c64b8303a8e98
Signed-off-by: Yue Ma <yuem@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: Id19f38a2b9a67b130876cb8df1e88c6a56aa6aad
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: I30b3899e191d880e741f922323d0826b5c292498
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
This change is for general scheduler improvement.
Change-Id: I616acbe5bfdb0e1bf88e923d98b4a3d54d26d942
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
If CONFIG_QCOM_COMMAND_DB=n the following compilation errors will be
seen. Fix this by including the appropriate linux headers.
./include/soc/qcom/cmd-db.h: In function ‘cmd_db_read_aux_data’:
./include/soc/qcom/cmd-db.h: error: implicit declaration of function ‘ERR_PTR’;
Change-Id: I76ed6230b00f88cefbb78e5f2ee4a534316078d7
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200227125615.4727-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Git-commit: 7ad18bb5c2c4bd50c8b83d375ee19be992022cf3
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
For synchronous messages sent from the agent to platform,
agent waits for response for 30 milli seconds (max_rx_timeout)
before timing out if response gets delayed from platform.
Increase the timeout value to 1 second to minimize message
send failures in case of delays.
Change-Id: I72e9ab33a9be675b64301e904e8d43fb8bb89e50
Signed-off-by: Santosh Mardi <gsantosh@codeaurora.org>
Enable CONFIG_PRINT_SUSPEND_EPOCH_QGKI to print epoch values
when the device enter into suspend and resume.
Change-Id: Ia2d54874405cf88f9283cdb1699f67078aa3fcbc
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Record cycle count and kernel time in ns while entering suspend
and while resuming. This will help in matching up the kernel time
with external subsystems and in recording suspend time in cycles.
Change-Id: If22d9880103c7d54087d0faf4c992259e6b97f08
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Print epoch values when the device is enter and exit out of suspend
and resume. These epoch values are useful to know how long the device
is in suspend state. These values can be used to synchronize various
subsystem timestamps and have an unique timestamp to correlate
between various subsystems.
Change-Id: Ibe04b914649db1f2ee0ae748f3950ca646323ef1
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Print proper values for host time and device time from an error
handling routine during time sync update.
Change-Id: Ib8d9d4fb86d4001b0e2b7d62bc2ae381616f3df6
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Add the logic to fall back to default path if it fails to load
firmware from device specific path.
Change-Id: I0595a3be97b6f803be232b73fb35b8b5b3c52b0e
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Packets arriving at SIP port will now be checked for SIP/2.0 before
getting tagged as SIP packet. Added helper functions strnstr and strnstrn
for checking substring in a string in case of non null termination.
Change-Id: Ia7d6a3ac5dd1e5f0ce97ee9f6d0c13f16d9dd7f2
Acked-by: Vinisha Varre <vvarre@qti.qualcomm.com>
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
