If get_acc_dev() fails to obtain a reference to the current device,
acc_disconnect() will attempt to put_acc_dev() with the resulting NULL
pointer, leading to a crash:
| Unable to handle kernel NULL pointer dereference at virtual address 00000074
| [...]
| [<c0abb288>] (acc_disconnect) from [<c0a91a38>] (android_disconnect+0x1c/0x7c)
| [<c0a91a38>] (android_disconnect) from [<c0a93958>] (usb_gadget_udc_reset+0x10/0x34)
| [<c0a93958>] (usb_gadget_udc_reset) from [<c0a4a9c4>] (dwc3_gadget_reset_interrupt+0x88/0x4fc)
| [<c0a4a9c4>] (dwc3_gadget_reset_interrupt) from [<c0a491f8>] (dwc3_process_event_buf+0x60/0x3e4)
| [<c0a491f8>] (dwc3_process_event_buf) from [<c0a49180>] (dwc3_thread_interrupt+0x24/0x3c)
| [<c0a49180>] (dwc3_thread_interrupt) from [<c02b3404>] (irq_thread_fn+0x1c/0x58)
| [<c02b3404>] (irq_thread_fn) from [<c02b326c>] (irq_thread+0x1ec/0x2f4)
| [<c02b326c>] (irq_thread) from [<c0260804>] (kthread+0x1a8/0x1ac)
| [<c0260804>] (kthread) from [<c0200138>] (ret_from_fork+0x14/0x3c)
Follow the pattern used elsewhere, and return early if we fail to obtain
a reference.
Bug: 173789633
Reported-by: YongQin Liu <yongqin.liu@linaro.org>
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I37a2bff5bc1b6b8269788d08191181763bf0e896
Signed-off-by: Giuliano Procida <gprocida@google.com>
Using bitfields for shared variables is a "bad idea", as they require
a non-atomic read-modify-write to be generated by the compiler, which can
cause updates to unrelated bits in the same word to disappear.
Ensure the 'online' and 'disconnected' members of 'struct acc_dev' are
placed in separate variables by declaring them each as 'int'.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ia6031d82a764e83b2cc3502fbe5fb273511da752
Signed-off-by: Giuliano Procida <gprocida@google.com>
Tearing down and freeing the 'acc_dev' structure when there is
potentially asynchronous work queued involving its member fields is
likely to lead to use-after-free issues.
Cancel any pending work before freeing the structure.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I68a91274aea18034637b738d558d043ac74fadf4
Signed-off-by: Giuliano Procida <gprocida@google.com>
If acc_setup() is called when there is already an allocated instance,
misc_register() will fail but the error path leaves a dangling pointer
to freed memory in the global 'acc_dev' state.
Fix this by ensuring that the refcount is zero before we start, and then
using a cmpxchg() from NULL to serialise any concurrent initialisers.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I2c26289dcce7dbc493964516c49b05d04aaa6839
Signed-off-by: Giuliano Procida <gprocida@google.com>
acc_release() attempts to synchronise with acc_open() using an atomic
'open_excl' member in 'struct acc_dev'. Unfortunately, acc_release()
prematurely resets this atomic variable to zero, meaning there is a
potential race on 'dev->disconnected':
acc_open() acc_release()
atomic_xchg(open_excl), 0)
atomic_xchg(open_excl, 1)
dev->disconnected = 0; dev->disconnected = 1;
Fix the race by ensuring that the 'disconnected' field is written
before clearing 'open_excl' in acc_release().
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ib9a21f2305f6d70de3e760da62dbfdd66889200a
Signed-off-by: Giuliano Procida <gprocida@google.com>
Add refcounting to track the lifetime of the global 'acc_dev' structure,
as the underlying function directories can be removed while references
still exist to the dev node.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I248408e890d01167706c329146d63b64a6456df6
Signed-off-by: Giuliano Procida <gprocida@google.com>
The '_acc_dev' global variable is a fancy use-after-free factory. Wrap
it in some get()/put() functions in preparation for introducing some
refcounting.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I4c839627648c209341a81efa0c001c8d71b878d4
Signed-off-by: Giuliano Procida <gprocida@google.com>
acc_alloc_inst() assigns to a local 'dev' variable, but then never uses
it. Remove the redundant assignment, and the local variable along with
it.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: Ide9c2e89fb12b846eb8739b302d1b742fc7eb6b5
Signed-off-by: Giuliano Procida <gprocida@google.com>
Remove some useless print statements, as they can trivially be used to
spam the console and don't report anything meaningful.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I28052010fc3ec033a2c99efeb3f6c919d54d75c2
Signed-off-by: Giuliano Procida <gprocida@google.com>
Neither acc_gadget_bind() nor acc_gadget_register_driver() exist, so
remove the stale comments that refer to them.
Bug: 173789633
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: If396ba3bcac3ca59c48e5a5faa0a8520534ed625
Signed-off-by: Giuliano Procida <gprocida@google.com>
In case of poweroff charging mode, accessory function instance
is not created and due to this, _acc_dev will be NULL. If target
is connected to Accessory dock in poweroff charging mode, there
is a chance dev pointer is accessed, which is NULL. Hence add a
check before processing control request and return error if it is
NULL.
Bug: 141002587
Change-Id: I4f1deb9d764b8c0bd1d7837cbc43a2933167f568
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Giuliano Procida <gprocida@google.com>
pte_accessible() is used by ptep_clear_flush() to figure out whether TLB
invalidation is necessary when unmapping pages for reclaim. Although our
implementation is correct according to the architecture, returning true
only for valid, young ptes in the absence of racing page-table
modifications, this is in fact flawed due to lazy invalidation of old
ptes in ptep_clear_flush_young() where we elide the expensive DSB
instruction for completing the TLB invalidation.
Rather than penalise the aging path, adjust pte_accessible() to return
true for any valid pte, even if the access flag is cleared.
Bug: 176475096
Change-Id: Ifd7919b4e9b790a94802b0115f93a9a260757036
Cc: <stable@vger.kernel.org>
Fixes: 76c714be0e ("arm64: pgtable: implement pte_accessible()")
Reported-by: Yu Zhao <yuzhao@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20201120143557.6715-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit 07509e10dcc77627f8b6a57381e878fe269958d3)
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Clear smp2p data during subsystem down to
prevent false smp2p notification to FW when
subsystem is up.
Change-Id: Iaa9a360e27a6e59d34ba9f02a28ce5dcf71ed0f5
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Currently usb driver is using 8 bytes request on interrupt endpoint
for all CDC functions. GPS host driver is expecting short packet/zero
length packet on interrupt endpoint and failing the transfer with 8 bytes
maxpacket. Increase the maxpacket size to 64 bytes so that host ends
the transfer with a short packet.
Change-Id: Icc9919fbd633468d3cc7d4d8ab1945730cdc7c06
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Add master and slave IDs for all Qualcomm Technologies, Inc. Monaco
interconnect providers which consumers can use to set bandwidth
constraints and find paths in the NoC (Network-On-Chip) topology.
Change-Id: Id2e816a74e382946c02345a5d1e39ed1d913ef90
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Currently lpm_suspend_enter and lpm_cpuidle_s2idle return
success always. This misleads on succcess and failure counts.
This change adds support to return correct value to caller.
Change-Id: I57dd0a4385f16f0e0aa1c92d602c0816ed358e2c
Signed-off-by: Tushar Nimkar <tnimkar@codeaurora.org>
Refractor the OSM L3 driver to make it easy to extend for
other targets.
Change-Id: Id9e9ff3c2e9a299fcee8881c68f43649b866259b
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Driver enables GSI wrapper only if OUT EP is present in
GSI interface which is not the case with DPL function.
This logic works as long as there is another GSI function
present with OUT EP (e.g. RMNET/RNDIS). However, if ADPL is
the only GSI function in composition then driver does all
the EP specific programming in USB GSI wrapper but doesn't
enable it. Since, initial doorbell is rung by software, data
transfer does start but eventually stall happens as USB GSI
wrapper doesn't ring doorbell.
Fix it by not having an EP check while enabling GSI.
Change-Id: Ia40209d5a3f3b5947b13e8909ef9f994200f7a85
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
