1.fix The first time the battery be inserted, the power display is low
2.reduce the time of temperature update
3.enable delay-shutdowm feature to set showdown voltage to 3.4v
4.enable SOC_SMOOTH_TRACKING feature to set show battery capacity 100%
when the real power is 97%
Change-Id: I96d88ce6e4d475a02005234f42a0f4943184bb94
Reviewed-on: https://gerrit.mot.com/2192328
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Configure the paired battery load according to the paired_ichg
which comes from the delta_soc mapping for paired battery voltage
and soc balance.
Change-Id: I8b4c5b0f95bec1656a96dfaf060d6b593052bfaa
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2192804
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Change calibrate/cm_panel/auto_shorts nodes from debugfs to sysfs
for CLI touch factory test,because debugfs is not used in user build
version and these nodes can not be used.
Change-Id: I129e2137a261e976c8ea81bc5acdd0042423cfd6
Signed-off-by: zhuwg1 <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2192076
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Driver will log the last touch down event timestamp and expose it via
sysfs. This feature utilized by sensors to mitigate false detection of
back tap gestures.
Change-Id: I53db8f1311275ef54c795de7f4f3ed350ed37842
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2190470
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Eric Hefner <ehefner@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
As "turbopower connected" appears twice, so report power max
30W when usb type is qc3p.
Change-Id: Ife81a9763022d74079b091eed0b33c535885e57b
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2181964
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
The firmware of aw96103 and aw96105 is same,
remove the firmware vesion check for the compatibility.
Change-Id: Ie460a853836da3de88d35066c0b5a5d90f2002f0
Signed-off-by: zhangh12 <zhangh12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2189877
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add zero tap finger up event for framework to improve
FOD zero type performance.
Change-Id: I35bae1931121431943e0a991a2adfd5cc47f8a7d
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2186508
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add main battery power supply to support main battery
property read in multiple batteries products.
Change-Id: I73c89fc4795ad0ae299460ed616b7d07d5a66ca1
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2189094
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add paired battery notification to limit the battery
load to system power and charging speed.
Change-Id: Ia416fe0b69bb6535e2874f518dcbb8d534dc3039
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2186534
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Add paired id used to support multiple batteries notification between
reference battery and target battery.
Change-Id: I2e1d991d055834a68c38eb7372c7fae17eb297e1
Signed-off-by: yanyh2 <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2186431
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
qc3p begin charging
voltage to 3V.
Change-Id: I9aa1f563930da1d2e2ac876c5757c960ec63be08
Signed-off-by: xuwei9 <xuwei9@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2180078
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
TP:
When sending multiple commands at the same time, the ack signal of
unexpected commands may be read, resulting in command sending errors.
Change-Id: I6f222a20725f5adc1509a01bd29f972c3171e56d
Reviewed-on: https://gerrit.mot.com/2178632
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
the phone slow attach usb sometimes, will not chrg as 33w
so we need avoid the vbus not present, sw set dpdm
Change-Id: I1d218bafafdecef911255d256b4e34dcde8aae76
Signed-off-by: huaqin85 <huaqin85@motorola.com>
Reviewed-on: https://gerrit.mot.com/2178754
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As do I2C operation before system resume, so wait max 500ms
for system resume before I2C operation.
Change-Id: I96ffbb94cd7c035e3a37b480eb70Montana4419eb981
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2177664
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Modify:
- Add the configuration for txd ili7807s.
- Change the ic name to ilitek_txd for CQA test.
Change-Id: I61ebc4ea91dbb0e016589ff3938a31f727514144
Reviewed-on: https://gerrit.mot.com/2176648
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yeqing Wang <wangyq13@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
As some product set DCP current 2A, so set icl 1.5A
when type_c mode is medium.
Change-Id: I1666e0851db87a2f3aab686f134f29a18fb3f928
Signed-off-by: mahj8 <mahj8@motorola.com>
Reviewed-on: https://gerrit.mot.com/2176580
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Long time vibration notice camera:
1.Power on the vcm when the motor vibration time exceeds 70ms[1/2];
Change-Id: I9c66c4c6af606857630db9449e496a13c3c56899
Signed-off-by: bchhq23 <bchhq23@motorola.com>
Reviewed-on: https://gerrit.mot.com/2176409
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
factory bt stattion no batt ntc resistance,
sm5602 adc get temperature is -20 or 80, force set it to 25 degree.
Change-Id: I2de7a9122e3f06d9c3ea7a150469b033f891841f
Signed-off-by: huaqin85 <huaqin85@motorola.com>
Reviewed-on: https://gerrit.mot.com/2175723
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
factory report 3.8v battery this fg only show 5-15% battery capacity.
As when phone is booting up,the current will be large,that pull down
the voltage of battery, the fg get the lower voltage and search the
corresponding capacity.
For the first bootup, the voltage compensation method is added
to avoid the problem of low battery display.
Change-Id: I18b07ca76b3418b3e3fe463698de1e6836a576d2
Signed-off-by: liuyc20 <liuyc20@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2174549
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Used to fix the failure of the probabilistic startup identification module
Change-Id: Id37309cd0e2e448e4989cea8ae098cd36d47e889
modified: fpsensor_spi_tee.c
Reviewed-on: https://gerrit.mot.com/2172960
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
