FEC and DSC are only supported in DP 1.4 onwards.
Read FEC and DSC capabilities only if this
requirement is met. This will ensure backwards
compatibility with older DP devices.
CRs-Fixed: 2541795
Change-Id: I65a6cb903f332e896946dc3b9da4d95a14fac939
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
The sink may have limited DSC decoding support
for some BPC values. Ensure that the BPC that is
selected is within the sink's DSC capabilities.
CRs-Fixed: 2527660
Change-Id: I0692e7b606e258c3cab3de25d3b03178f4aa0294
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
By adding spin locks around the handle frame done, a race
condition, between the wait for idle of one frame, and the pp
done of the next frame, is mitigated.
Change-Id: I78650fc9688b22db6d314b9bed023e0ddad20dbf
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
PM_SUSPEND API adds extra pm_runtime refcount and calls
the device driver for pm_suspend. At this point display
device may not be in power collapse state. This patch
makes sure that crtc_commit thread is idle and triggers
power collapse also.
Change-Id: Ia21d6a6b6fd32caeb9d16fa5cf998b91ef990e01
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Update max display resolution based on scale ratio support
when decimation support is not present.
Change-Id: If9a87a12c830a700f839fdf47f929e575b66d318
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Clients of local tone mapping engine need to know when hardware block
was turned off, to enable mutually exclusively display features.
Change adds support for ltm off event notification via custom event
interface of drm.
Change-Id: Ibfe2f85eadb0b939deee56194387b51b1e5ca8b9
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Switch to watchdog vsync whenever panel jitter is
identified during frame-transfer on command mode display.
This would allow the HW to finish processing the frame
with watchdog vsync source. Switch back to default vsync
source after the frame-transfer is complete. This would
help in the MDP hang issues in panels that generate TEs
with thresholds greater than the projected jitter.
Change-Id: Ic3fa78d90e7f44cb0186857716ac27e72505fd32
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add null check before accessing pingpong hw block
allocated during mode set to physical encoder.
Change-Id: Ic464e7c7087f280b1198f6b7485bc0763322c532
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
This change moves the panel null check to the beginning of the function
so panel can be used throughout the function. This change also replaces
looping through display ctrls with proper display_for_each_ctrl.
Change-Id: I0014ee7ad6d8514734f9233a1abb314e60d29b5f
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
While disabling merge3d block, pending flush mask
needs to be set for merge3d.
Change-Id: Ic7baea278ac62ac1203aad8a33c40874704c85a1
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
When panel exits LP1, need to set OLED power mode.
Change-Id: I045777a0dce941e45b71bc74c7b2908b24df3396
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
ELVDD/ELVSS has a dip during AMODE panel AOD exit hand-off.
According to PMIC team's suggestion, need to config the AB/IBB power
to REGULATOR_MODE_IDLE/REGULATOR_MODE_NORMAL to fix dips.
Change-Id: Ia5cbd4d698de262e02a660f670865c03dda1e04a
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Parse the DTS panel type settings. Consider the default
panel physical type as LCD. We need to set OLED in DTS if
the panel is an OLED type.
Change-Id: Ib53651ab3861e75bf061f38d60a2f6135c1f537d
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
DSI driver sends nolp commands when DSI connector power
modes is set SDE_MODE_DPMS_ON or SDE_MODE_DPMS_OFF. This
is invalid panel configuration. It should only send nolp
commmand to panel when it is in LP1/LP2 mode.
Change-Id: Ie94eaef6899d292fd20f42c1b7ef2c7a99178d13
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Init ltm_buf_busy list head before adding new node to avoid
list_add corruption.
Change-Id: Ic90f82c929150640bc12d4f31cf7115879f92037
Signed-off-by: Ping Li <pingli@codeaurora.org>
Update the topology allocation by considering the required
mode clock (vtotal x htotal x fps * fudge factor). Modes with
a clock that exceeds the maximum SDE clock will be denoted as
requiring a topology that uses two layer mixers.
Change-Id: I3c773598b0d79cb6fea9d3a0e04d89ff84d67e13
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Add required changes to makefile and enable the config
keys for Bengal target compilation.
Change-Id: I7a27be5feffd132cbc35d4a7aa27521b6841e2fe
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Fix warnings by accessing PGC and IGC c1 and c2 component arrays directly
rather than through offset from color0 component lut address.
Change-Id: I18df6c6a599ab8dc5f69c34c6977e289402e9e4f
CRs-Fixed: 2531780
Signed-off-by: Ashu Sharma <aashu@codeaurora.org>
In dual display cases when secondary display is resumed first,
primary CTL and LM is selected for secondary path which leads to
invalid configuration. Changes are made to correct the reservation
to select primary CTL and LM for primary connector and secondary
LM to secondary connector.
Change-Id: I6b2a8bedaf46f18bdb28b45ac765f32b26207304
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
During the validation of inline-rotator downscale ratio,
in the plane atomic_check phase, the client_type is
derived from the crtc->state. This leads to wrong
client_type as in check phase, it has to be derived
from the new crtc state. Fix it to derive from
new crtc, which would in turn be used to get the
correct inline-rotator downscale ratio.
Change-Id: I109fc6fd81182b1cda1c4feefbf421d3fab433c7
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
