Add support for 128 byte format to comply
with optimized viewer requirements.
Change-Id: Icfa7ca1cadf3f18533912f403af50532eea47c60
Signed-off-by: Rohit Bandi <rohitbandi@codeaurora.org>
Adding IOCTLs to give userspace control over to start / stop
IMU streaming and read calibration data from the external
device.
Change-Id: Iee5103e3a13cc31e4afcac13284e3594f49735bf
Signed-off-by: rbandi <rohitbandi@codeaurora.org>
Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org>
HID driver to handle sensor data from external device
and writes it in to shared memory. Sensor data includes
temperature, accelerometer, gyroscope, magnetometer data.
Change-Id: I06a897166a1106889c60bda0d8f8f84684032d0e
Signed-off-by: rbandi <rohitbandi@codeaurora.org>
In the GKI configuration, the arm-smmu-mod module will already
be present as a GKI module (i.e. the module will be generated from
the GKI ARM SMMU source). As such, there is no way to distinguish
between Qualcomm's ARM SMMU module, and the GKI ARM SMMU module,
since they have the same name. Thus, rename Qualcomm's ARM SMMU
module to distinguish between the two.
Change-Id: I6a41d3d518a800da4d560c8b8d2b8c48f1866d9a
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Some implementation's of the 'cat' command pass the
absolute position of the file-offset. In the current
implementation of 'regmap_data_read_file' this leads
to dumping all the registers from offset 0.
Avoid this by quitting the read loop if the file-offset
requested is lower than actual read-offset.
Change-Id: I7c6c31958e92f16387bf4cb5de7fbf4572fcce21
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
This enables the QTI specific ufs core driver.
The upstream core driver is skipped when enabled.
Change-Id: Ia2c3932aa627245495d1ff70027c2f9f9c3a5bc0
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
This patch fixes a NULL pointer dereference by checking
if vccq & vccq2 are valid before dereferencing it.
Change-Id: Ieb5aefab77428adbbbbf892f2be1a9942d7c3851
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Use the dev_iommu_fwspec_get() accessor, instead of directly
accessing the device structure for the IOMMU fwspec, as well
as remove an unnecessary forward declaration.
Change-Id: Id09202bd468bddbf8bdf194513fda34b59756fba
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
When the ARM SMMU module is unloaded, the exit routine does not
fully clean-up after the initialization routine, as it leaves
the TBU driver registered. Thus, unregister the TBU driver
when unloading the SMMU module.
Change-Id: I536f756dab7eebeffe0dd907629feed6657a2532
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
The remove() callback for the ARM SMMU driver should ensure
the SMMU devices that are being registered are no longer
visible to the IOMMU framework, so remove the devices
by invoking iommu_device_unregister().
Change-Id: I87dd7b4619e5b26b7eed64b04e3716f3b9c417c5
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
ipa_disable_apps_wan_cons_deaggr() has different declarations when
CONFIG_IPA or CONFIG_IPA3 are not set. Thus fix the declaration to
align with CONFIG_IPA or CONFIG_IPA3 enabled one.
Change-Id: Ic09cac2484c9cfbcd0833583c05c6fc19a3c2aed
Signed-off-by: Jia Ding <jiad@codeaurora.org>
This reverts commit 75afa532e7.
Too many things rely on cmd-db to be built in to allow it to
be built as a module.
Change-Id: I317ba89a7d3c9f88832e73834b65bcccac79bbe1
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
The ability to vote IPA clock from user space is now required. Given
this, voting for IPA clock can now be done via an ioctl. These changes
implement the ioctl.
Change-Id: Id7e02678e96da98f2a17f35e7f6736fba39ca990
CRs-Fixed: 2592003
Signed-off-by: Perry Randise <prandise@codeaurora.org>
The ability to vote IPA clock from user space is now required. Given
this, voting for IPA clock can now be done via an ioctl. This header
file supports the ioctl and can be independently propagated.
Change-Id: I742a7950f9fc53f17cb6f210f2b7f06ade842011
CRs-Fixed: 2592003
Signed-off-by: Perry Randise <prandise@codeaurora.org>
possibility of OOB access on device->response_pkt in
__response_handler. for e.x if msg queue contains 1000
messages and all 1000 were read and queue is empty.
So __get_q_size api will return zero and _iface_msgq_read
will go in an infinite loop, even if packet_count
== max_packets.
Change-Id: I8e64ff70d5bcefb52d66bfea121f3febf4728384
Signed-off-by: suchawla <suchawla@codeaurora.org>
Add usb streaming support to collect trace data externally.
Add support to enable USB mode for coresight devices.
Set memory as the default mode on ETR.
Change-Id: I3bd2bd92c676ff79a3ae5a045a54e7d1e867543d
Signed-off-by: Mulu He <muluhe@codeaurora.org>
Signed-off-by: Tingwei Zhang <tingweiz@qti.qualcomm.com>
Add support for PMIC7 ADC_TM peripheral in ADC_TM common driver files.
Add main ADC_TM driver file for PMIC7. As register offsets and SW flows
have changed significantly for ADC_TM due to ADC architecture change,
this new driver is required for ADC_TM on PMIC7.
Change-Id: I9c92ab0a93a1bf487cb9fa0e9640b3c4eaf2b21a
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
ADC_TM peripheral is used by client to set thresholds on channels
supported by VADC and send notification once set thresholds are
crossed. The driver registers thermistors used for thermal
mitigation with of_thermal to allow thermal driver to set
thresholds and receive notification through thermal sysfs.
This is a snapshot of the driver taken from msm-4.19 as of commit
f94ba33e3b90 ("Merge "usb: dwc3-msm: Fix GDSC collapse in host mode
bus suspend").
Change-Id: I9211552317955c503b7287876e11cd161c37f706
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
