Newer SoC's do not need the SPI register to be written from secure
firmware. Remove the DT property.
Change-Id: If02010f92f5830013966c5344dce93911e055b1b
Change "dp_hs_phy_irq" and "dm_hs_phy_irq" IRQ trigger types
to rising-edge instead of dual-edge in order to match with
what the driver is requesting. This avoids a error produced
when the driver is removed and reprobed as the kernel IRQ
subsystem will have updated the trigger type to the driver's
request type, and on the subsequent probe results in the
following errors when IRQ mapping is performed due to the
flags mismatch:
[ 885.423166] irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
[ 885.439468] irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!
Change-Id: I9c8ac57691072a09276473b5a66f330e5bd94a8b
Update the device node for rpmh cc under apps_rsc in place of
the dummy cc. Also remove the tcxo and bi_tcxo stub devices so
that real RPMh clocks can be registered.
Change-Id: I2363e06172689cb04081e56134788d585c448387
The UCSI Glink device handles the communication between OPM on
the Application processor and PPM which is charger firmware
running on the remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: I1ff3756302c40c88954109b6dccaf87e59e66919
The msm_bus driver is being replaced by the interconnect framework
and provider drivers on Lahaina. Update dts entry accordingly.
Change-Id: I34585c25706cd4955d34136342d8417e8357999c
This change adds USB BAM device node and required pipe configuration
for USB QDSS BAM2BAM functionality.
Change-Id: Id9023f281e057632da304ff8abfd974dcfc314e6
Add secure Peripheral Image Loader (PIL) device-tree node
for modem to handle all its power operations, such as,
power-on, power-off, and restart.
Change-Id: Ib30f16dd9a314c2c23ee043db7da4e5f35593e5e
Add bindings for regulator proxy consumers which can be used to
enforce minimum voltage, current, and enable state of regulators
when a board is booting up.
Change-Id: If51da56b7c8f685d0c8a93d514964d2c924381ce
Add "qcom,pmic-glink-channel" property for pmic glink device so
that the child devices under it can associate with rpmsg device
that is used for Glink channel.
Change-Id: I121103506281970fda7f85176fec58119937ab02
Add references for the GDSC regulators for the APPS and GFX SMMU
devices on Lahaina, to allow the HLOS to vote for these
regulators prior to accessing the respective register spaces.
Change-Id: I6ec4049cd0c17804c3de038f7a821e907d47d3a2
The PMIC Glink device provides the interface for clients to
communicate over GLink for sending/receiving data to/from
charger firmware that runs on a remote subsystem (e.g. ADSP)
which supports charging and gauging. Add the bindings for it.
Change-Id: Ia4f5ff346ebfa773bc0fe3d0410626ea67e1da31
Add device node for SSC sensor device for Kona. This will
create a device node to make userspace clients read sensor
related information.
Add devicetree node for SLPI PIL which facilitates the loading
of SLPI firmware, authentication and bringing it out of reset.
Change-Id: I839e33926e4ff2c5adda823604d17543ae84131c
