Hyp uart is default disabled from ABL now. There is no need of
CONFIG_HH_DISABLE_UART option anymore. Hyp uart now can be controlled
using DEBUG_FS interface.
Change-Id: Ie1a0986399d30b89bf62468a23633994c8d6b11b
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Hyp uart is disabled default today in ABL. Provide debugfs
interface to users when they want to enable hyp uart to
debug hypervisor and VM issues.
Change-Id: I5e2c0501ed309a65c9dff1304b2e88e0d58917ae
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
In ssr handling of remote subsystem down, all rpmsg devices are removed
for that edge. If at the same time ssr down is received for other remote
subsystem, it may try to notify already down remote and end up using
invalid rpmsg device which causes use after free.
Store device state in ssr context and update this with holding a lock.
SSR notification function should also use the same lock and perform
check for validity of rpmsg device.
CRs-Fixed: 2580433
Change-Id: I339e228a527f7b6a737944d8e9e53caa31992914
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
During ssr rpmsg ssr device will unregister, which can result
in use of stale device pointer in ssr callback function.
Now incrementing refcount inside ssr callback function to
prevent release of rpmsg device.
CRs-Fixed: 2551255
Change-Id: If3fc57c4635378dc6fdcb7df120c83dca0e83758
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Do initial CPU reservation before starting VM, to
avoid any resource contention, while booting guest
VM. Remove the reservation after a configured timeout,
which defaults to 8 seconds.
Change-Id: Id49b07edd3e558dee074eafb729423ad8f8ff98d
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Some targets do not have GSI feature. For such targets, gsi_reg
array does not get allocated. DWC3_CONTROLLER_NOTIFY_CLEAR_DB
event from gadget driver will access this unallocated memory.
Fix this by putting a check for gsi_reg.
Change-Id: I9903c0c6533abf3d6e689a40ea84ecbc066e10d8
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
Add support to accelarate QDSS diag traffic over IPA to the PCIe
host with ipa fmwk support.
Change-Id: I64a8c493e8b6ef3fc525a3edcfd57e1cd11ccb6c
Signed-off-by: Michael Adisumarta <madisuma@codeaurora.org>
Currently driver is not returning any error from the error
handling path if driver fails to enable power for PHY.
This patch adds a check and returns error if the driver
actually fails to set_voltage or fails to enable a particular
regulator.
Change-Id: I5427690602b6152151adee71c6388ce836ab90c6
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
Use a6x crashdumper register memory end location to know
the crashdumper status completion. This will avoid AHB
traffic while crashdumper was active in snapshot dumping
and fixes the slave timeout issue.
Change-Id: Ic24e75557297c6a1a3f2ad7893f4d8d308f9943c
Signed-off-by: Hareesh Gundu <hareeshg@codeaurora.org>
To properly ensure that the vdd regulator is put in the correct
operating mode, it needs to have a call to regulator_set_load()
prior to being enabled. This is crucial for platforms where the
HS PHY is the only consumer of the regulator as it could be
inadvertently left in LPM mode and cause the PHY to not function
properly.
Change-Id: I87815c60f044d854ecc75ac6039fd80c2d3197aa
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Enable LPM and SoC sleep stats drivers for gen3auto.
Change-Id: I7dd08d1044054d5b330d149aa1f26f13d9d7b9bf
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
When stop command comes during FIFO refill, it would free custom_effect
FIFO sample memory and set the pointer to NULL, and this would cause
the NULL pointer dereference during FIFO refill. To fix this, add a
mutex lock between FIFO stop and FIFO refill sequence to avoid a race.
Change-Id: I8792c2183f06e84fca3a7c4dddfed667b25f2528
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
This is to help the hardware configured in world
roaming mode to save power when not connected to
any AP.
CRs-Fixed: 542802
Change-Id: Ia643d0e9848dcd486832973bd6dd186edd7bd4ea
Signed-off-by: Mihir Shete <smihir@codeaurora.org>
Signed-off-by: Will Huang <wilhuang@codeaurora.org>
QUP common registers should not be accessed from SVM as that
memory is assigned to PVM. So, bypass the reading of hw version
registers and rely on PVM for the specific HW initialization done
based on different hw versions.
Change-Id: I1f18c80aaf143daf4da1402aa617d3b8f52f9b95
Signed-off-by: Vipin Deep Kaur <vkaur@codeaurora.org>
