Add support for "bms" power supply which is not present in kernel 5.4
through IIO device and properties under it through individual IIO
channels under the IIO device.
Change-Id: I55c44e5db2dc4549021cb429444c7c5afa679c3a
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
SMB5 charger drivers and their helper files use several power supply
properties on msm-4.19 which cannot be supported on msm-5.4 due to the
need for GKI compliance. Add support for main charger to register
as an IIO device with individual channels under it corresponding to
missing power supply properties from msm-4.19.
Change-Id: I7182160258fa2ebd4af36b0531b11d988cffdbd3
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
This change enables CONFIG_NL80211_TESTMODE config for
wlan host driver in holi.
Change-Id: I0974f58a2f25c14991ff4a22b998827b0a579b95
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
Correct the device passed for registering a proxy consumer supply
in the regulator device probe.
Change-Id: I33028648b66b922cb1132fd87ca8aa2be1b02799
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Don't start usb transfer when rwp offset is invalid to avoid exception
happening when transfer usb data.
Change-Id: I7182ebb2e66131a21d65f7df0ad239c6346c0e9d
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
The EUD driver's 'enable' command line argument is set to
EUD_ENABLE_CMD even if the bootloader hasn't enabled it,
which is not correct. Hence, update the 'enable' variable
based on the state of the hardware.
Change-Id: I1159436c0e9a803462f2154ccc05649d3f7b40da
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
In case PCIe endpoint driver infers link down because of
completion timeout for config space access or if link fails
to enumerate, ep driver can request to handle the link down.
This allows to stream line the link down notification to ep
driver to initiate recovery operation.
Change-Id: I652e60e570c1e90c9f96d1c197e4b5501cd60a1e
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Pages that are swapped out are pages that can reside in the movable
zone. However, when they are swapped in, they are restricted to the
normal zone, when they can reside in the movable zone again. Set the
GFP flags accordingly for swapin allocations, so that they can be
satisfied from the movable zone.
Change-Id: I25919034a5197a1c4f830e498d32347aa460187f
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Enable Uclamp for Holi, which is replacement of STUNE.
Change-Id: Ie89b57b244bc818759e63b320d9f015dba5255ec
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
There is a possibility of cx gdsc off timeout when stall on fault
is enabled. smmu fault handler is blocked on device mutex to keep
cx vote and dispatcher trying to turn it off for recovery. To avoid
this race condition, return from fault handler when there is contention
for device mutex.
Change-Id: Ia895152f8cf1ce9bdcfecf256558ba291dabc978
Signed-off-by: gkiranku <gkiranku@codeaurora.org>
QUPv3 controller supports different modes of data transfers for SPI.
Add support to choose only fifo mode for data transfers. Currently
SSC DMA path is broken as agnoc is not enabled. This clk is owned by
SLPI, once SLPI change is mainlined we can use DMA mode for SSC QUP
also.
Change-Id: Ie4c67be29adba9d6c5a5bb1b9eb2161a2b384100
Signed-off-by: Ashish Kori <akori@codeaurora.org>
Avoid using fastrpc ctx after sending rpmsg since it may get
free during async session. During async fastrpc session there
is race condition where after sending rpmsg the ctx could be
free from async query thread.
Change-Id: I5738163096e429f19bd9b495699a1897083737b3
Signed-off-by: Edgar Flores <edgarf@codeaurora.org>
To allow the Secure VM to function similarly to the
primary VM during a panic, the panic timeout and panic
on oops configs need to be set the same way they are set
in the generic GKI configs. Currently this is not set so
the default is 0, meaning that during a panic the watchdog
becomes disabled and the system does not reboot.
Change-Id: Ib92df399da28cd8a39ad7d972fcc56fa2ad0f46a
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
This driver takes advantage of the watchdog api in
the hypervisor through the use of ARM SMCCC calls.
It allows for communication between the watchdog
code in the kernel, and the watchdog api in the
hypervisor.
Change-Id: I9406f066fb9fd1b808a4b52a328b0c6c8185238e
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
Refactor the soc watchdog driver to use the
qcom watchdog framework.
Change-Id: I12a6afff4299bb39cacca27bcf483e08a503add0
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
Separate core watchdog functionality from the qcom watchdog
driver to create a framework for other qcom watchdogs. This
will reduce the duplication of code for future watchdog
drivers and allow them to take advantage of this framework.
Change-Id: I1234af9d92de6841bd09157042a4fbba1745f11b
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
Refactor watchdog core to remove the bark percpu
interrupt as it is deprecated and no longer used
by the watchdog.
Change-Id: Idbd959a7b42895d72f4f812057304687f7aca948
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
Refactor watchdog core to remove unused member
variables in the watchdog data structure.
Change-Id: I3a83fdb291064f25721549a3fe70f97629c148b4
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
Refactor watchdog core to remove dead code. Specifically,
the slack variables from the watchdog data structure and
the pet function that uses them. Currently these variables
are not used and can be refactored to simply reset the
watchdog counter directly.
Change-Id: Ie184e2826ed790288a94dfebf578ec99b53831e8
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
Add the config for the core watchdog framework.
Change-Id: Idfde28614cb5d7ac239c193ff6374ad5b753e366
Signed-off-by: Branden Bonaby <bbonaby@codeaurora.org>
