Disable TDLS off channel if 2g or 5g is disabled, restore TDLS off
channel configure when all bands are enabled.
Change-Id: Iabfdcdbf84e4a6313ad04e381b70e21c871d66c2
CRs-Fixed: 2595303
For packet capture mode, register an interface through
hdd_add_virtual_intf and delete using hdd_del_virtual_intf.
During register, remove the P2P interface and add it back
during deregister.
Change-Id: I79d933c96591cd462e27eda73f5aed2cc7cad8af
CRs-Fixed: 2528549
Create a mon thread to process the packets for pktcapture
mode only if packet capture mode is enabled.
Change-Id: I64e3687d08acd0d27019ed9e11b5b92b13fcd878
CRs-Fixed: 2528545
Remove deprecated code because of CRYPTO_SET_KEY_CONVERGED cleanup
in MAC layer.
Change-Id: I65bc90b457cdd642d64d6ab0e6829856ee93e472
CRs-fixed: 2593528
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in WMA layer.
Change-Id: If70fc5cb01f2a0123030c92410e126ce8078e1c6
CRs-fixed: 2593526
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in MAC layer.
Change-Id: I34fb7a6a67dd6dba3fa69c98ef10a1bd51383e36
CRs-fixed: 2593525
Update packet capture mode param in the HDD context
after reading the INI parameter.
Change-Id: I3ea88e376f1ad8ebc96715d08395331470c23d4a
CRs-Fixed: 2528536
DUT formed P2P connection with second device and as P2P GO, trigger
assert in target, supplicant get P2P client deletion event, and then
DUT remove P2P GO and change interface type from P2P GO to P2P device
but failed since recovery in progress. This change avoid to indicate
P2P client deletion event to up layer since host will sent P2P GO
stopping event to up layer.
Change-Id: I2221332d062f1e5f74846187ce9b478a11b8eb9f
CRs-Fixed: 2589866
In roaming path, while processing roam synch indication info/err
prints at the driver adds up latency to the total roaming
transition time and the KPI for maximum transition time exceeds
the expected 100ms. The printk buffer is protected by a global
raw spinlock for readers and writers. This restricts the contexts that
are allowed to access the buffer. So large latencies exists when
printing to kmsg done with QDF trace levels WARN, INFO, ERROR.
Change the redundant/less significant info, error, warn level
prints in roaming path to debug level.
Change-Id: I8e2a03ddef8f3cd680263939f6e0275b8703e681
CRs-Fixed: 2597624
Fix insmod Genoa wlan module failure for:
wlan: Unknown symbol wlan_set_vdev_crypto_prarams_from_ie.
wlan_set_vdev_crypto_prarams_from_ie is defined in
wlan_crypto_global_api.c
UMAC_CRYPTO_OBJS := $(UMAC_CRYPTO_CORE_DIR)/
wlan_crypto_global_api.o \
ifeq ($(CONFIG_CRYPTO_COMPONENT), y)
OBJS += $(UMAC_CRYPTO_OBJS)
endif
The crypto component is always required after convergence
between WIN/MCC, hence just unconditonally set
CONFIG_CRYPTO_COMPONENT := y in Kbuild.
Remove CONFIG_CRYPTO_COMPONENT := y in defconfig of each wifi
chip: default_defconfig, qca6174_defconfig, qca6390_defconfig.
Change-Id: Id0abe80673d59d9274401f1304b5ce1d906624eb
CRs-Fixed: 2596124
Currently there is no information maintained in the driver regarding the
tx patterns configured, this can result in sending the commands to
firmware without a proper validation i.e. sending the delete pattern
without validating.
To resolve this issue, maintain the add pattern history and validate
whether when the del pattern is issued.
Change-Id: Ie097a36fe46640ddfd539c481491025512571300
CRs-Fixed: 2596705
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in SME layer.
Change-Id: Iff9ba19887caaa39f43cb58d519a14cf6e759d59
CRs-fixed: 2593523
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in HDD layer
and SAP module.
Change-Id: Ic92e44e53c63ba2752907ace3ffc0f55d18470e2
CRs-fixed: 2593520
WLAN_CONV_CRYPTO_IE_SUPPORT is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag.
Change-Id: Ide9fa97a9eb0b5c197c762205f386651efc51e33
CRs-fixed: 2592096
CONFIG_CRYPTO_COMPONENT is supposed to be enabled for all devices,
so enable it for Genoa as well.
Change-Id: Icf37a9052c329e362460342fe44d8fe70c5bb1ed
CRs-fixed: 2597797
The function hdd_rx_mic_error_ind() is not releasing the pdev reference,
causing a pdev object manager leak for the WMI command WLAN_MLME_SB_ID.
To solve this, add a new goto label release_ref_and_return that releases
the pdev ref count before exiting the function.
Change-Id: Ic798cf5064403120058e01099bb846397e887951
CRs-Fixed: 2598665
The host driver sends WMI_ROAM_PER_CONFIG_CMDID command after
WMI_ROAM_SCAN_MODE as part of RSO start/update. But the
expectation from firmware is that host should send this after
WMI_VDEV_PARAM_ROAM_FW_OFFLOAD but before WMI_ROAM_SCAN_MODE.
Also the WMI_VDEV_PARAM_ROAM_FW_OFFLOAD is sent after set key
response from csr->lim->wma->wmi. But the
WMI_ROAM_PER_CONFIG_CMDID is directly posted wma (csr->wma->wmi)
which can cause this command to go before the
WMI_VDEV_PARAM_ROAM_FW_OFFLOAD is sent to firmware.
One more instance where the WMI_ROAM_PER_CONFIG_CMDID can go
before vdev roam fw offload init is if the userspace sends
blacklist update command before offload init happens.
So route the WMI_ROAM_PER_CONFIG_CMDID via lim before posting
it to wma and add changes in rso update config to block the
blacklist command being sent in ROAM_DEINIT state.
Also Call csr_roam_offload_per_scan before csr_roam_send_rso_cmd
in csr_roam_offload_scan to send WMI_ROAM_PER_CONFIG_CMDID before
WMI_ROAM_SCAN_MODE.
Change-Id: I2600cfeafcc3e3ebfac6694c1f2cdb5df0366411
CRs-Fixed: 2596257
When WMI_ROAM_STATS_EVENTID is received, the driver copies the
roam scan candidate AP data from the event to destination
buffer. This num_ap count is used directly to fill the diag
buffer. When the number of candidates sent by the firmware
is greater than MAX_ROAM_CANDIDATE_AP(8), corruption of the
destination scan->ap buffer occurs.
Validate the number of APs before filling the diag event.
Change-Id: I5258bc0d4ce0108cbc5195aa464afd498ae9fbf9
CRs-Fixed: 2598513
If there are still RX packets pending in the napi gro_hash list, do RX GRO
flush after flushing the RX thread pending packets when detach the vdev to
avoid net_device might be invalid later which has been stored already in
the pending skb.
Change-Id: Iff0a5cf49c87b91b8cae3dbcb541d1cf0bc480a6
CRs-Fixed: 2598149
Modify sme_enable_sta_ps_check() to take power save mode
parameter as new argument.During certification WMMAC test
cases failed due to recent change of saving user power save
configuration. The uapsd auto trigger cmd could not be send
due to user power save configuration.
Apply the user power save configuration in conjunction with
power save mode.
Change-Id: I79bdfc3f4d168df23415bfb3418913de7a45886a
CRs-Fixed: 2592560
Scenario:-
1. Turn on SAP and STA on 2.4ghz and 5ghz
2. Turn off SAP
3. Turn off STA
4. Turn on SAP on 2.4ghz
Issue:-
In the start ap function, the driver calls
the stop opportunistic timer and calls the handler
to goto SMM mode.
After this, the SAP checks whether it requires the
DBS or not and then requests for DBS also, but since
the driver is already in DBS mode this command gets
rejected, so there would be 2 commands in the serialization
queue which would be SMM and start AP, which would lead to
a crash as SMM is sent before a connection on 2.4ghz as
Hastings is not capable to start a vdev in 2.4ghz without
DBS mode.
Fix:-
1.Not allow SMM if the current connection requires DBS
2. Check the HW capabilty in the active command only and
not before that to protect the reliability of hw mode.
Change-Id: I1c0c05ea05ba14d1556af2612daa3de2ffcba367
CRs-Fixed: 2587508
During mdm SAP+SAP+SAP case, if 5G band is disabled for modem
N79 band, need all 5G SAP switch to 2G to force scc.
when 5G band is re-enabled, all 5G SAP can switch back to 5G.
Change-Id: Ief7d7c85a7881885bd95c8af6be8d4e428d07041
CRs-Fixed: 2597602
Enable DP Bus Bandwidth feature in WHUNT config, this helps to
execute and detect issues in Bus Bandwidth feature code path.
Change-Id: Id4376236b77661519667c40c427c50af436a9dc2
CRs-Fixed: 2597300
6Ghz SAP needs to send either a probe response or fils
discovery at every 20ms.
Add a new ini to configure the probe response or
fils discovery frame.
enable_6g_sap_fils_discovery=1 sends fils discovery frame
at every 20ms.
enable_6g_sap_fils_discovery=0 sends probe response frame
at every 20ms
Change-Id: I6c5fb339135cf11be071d73970ea3704441380eb
CRs-Fixed: 2586524
When roaming is complete, firmware sends WMI_ROAM_STATS_EVENTID
to host driver. This event has details regarding the roam
trigger reason, roam scan and candidate details, roaming result
and 11kv info sent after roaming to AP. Parse this event and
fill the below diag log report to print this in logcat:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO
LOG_WLAN_ROAM_TRIGGER_INFO
LOG_WLAN_ROAM_SCAN_INFO
LOG_WLAN_ROAM_RESULT_INFO
LOG_WLAN_RRM_TX_RX_INFO
Change-Id: Ie09dc8ad5b236d0925327dba73a3f2e73a80109a
CRs-Fixed: 2597057
If TXBF is disabled, do not configure TXBF to FW. Otherwise NDPA
packets are sent by SAP from air sniffer, which is incorrect.
Do not configure TXBF to FW through WMI_VDEV_PARAM_SET_HEMU_MODE
if TXBF is disabled for HE.
Change-Id: Ib1f9366ce18be8dadfdb46663f6606dd08f0e033
CRs-Fixed: 2596373
Certification test case HE-4.2.2 enable both 11ax and wep for sap, we
start sap as 11g mode as expected, but there is additional IEs from
hostapd which has HE cap/op IEs fails the case.
Strip these HE IEs from additional IE configure from hostapd when HE
has been decided to disable when sap start in host driver.
Change-Id: If1001255cc6528ab1a01d72d13f8376815aa5ebc
CRs-Fixed: 2594834
